On Tue, Apr 21, 2015 at 01:33:55PM +0100, Richard Fitzgerald wrote:
> +static int wm8998_in1mux_ev(struct snd_soc_dapm_widget *w,
> + struct snd_kcontrol *kcontrol,
> + int event)
> +{
> + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
> + struct arizona *arizona = dev_get_drvdata(codec->dev->parent);
> + unsigned int left_mux, right_mux, in1mode, old;
> +
> + switch (event) {
> + case SND_SOC_DAPM_PRE_PMU:
> + /* Validate the mux configuration */
> + left_mux = snd_soc_read(codec, ARIZONA_ADC_DIGITAL_VOLUME_1L) &
> + ARIZONA_IN1L_SRC_MASK;
> + right_mux = snd_soc_read(codec, ARIZONA_ADC_DIGITAL_VOLUME_1R) &
> + ARIZONA_IN1R_SRC_MASK;
> +
> + /* Only IN1A can be digital, IN1B is always analogue */
> + in1mode = (arizona->pdata.inmode[0] & 2)
> + << (ARIZONA_IN1_MODE_SHIFT - 1);
> +
> + if (in1mode != 0) {
> + /* if IN1A is digital, the only valid mux configs
> + * are both channels A or both channels B.
> + */
> + if (left_mux != right_mux) {
> + dev_err(arizona->dev,
> + "IN1=DMIC and IN1L Mux != IN1R Mux");
> + return -EINVAL;
> + }This (or at least some of it) seems like something we should be doing by registering different widgets and routing at device probe time. > + old = snd_soc_read(codec, ARIZONA_IN1L_CONTROL) & > + ARIZONA_IN1_MODE_MASK; > + if (old != in1mode) > + snd_soc_update_bits(codec, ARIZONA_IN1L_CONTROL, > + ARIZONA_IN1_MODE_MASK, in1mode); Why bother with the read into old here? Suppressing redundant updates is part of the point of snd_soc_update_bits().
signature.asc
Description: Digital signature
