Hello again.
An update: the patch you suggested combined with a bios update have
fixed the remaining issues. All is peachy now.
Thanks everyone.
On Mon, 2005-07-25 at 19:46 +0100, Ricardo Bugalho wrote:
> Hello,
> yes it does help. Thanks.
> Still not perfect though, it gives a warning, reports to be working on
> half-duplex and I can't use mii-tool with it.
>
> Here's the dmesg output (2.6.12.3 + patch):
> Linux Tulip driver version 1.1.13 (May 11, 2002)
> ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
> tulip0: EEPROM default media type Autosense.
> tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1)
> block.
> tulip0: Index #1 - Media 10baseT (#0) described by a <unknown> (128)
> block.
> tulip0: Index #2 - Media 10baseT (#0) described by a 21140 non-MII (0)
> block.
> tulip0: Index #3 - Media 10base2 (#1) described by a 21140 non-MII (0)
> block.
> tulip0: Index #4 - Media 10baseT-FDX (#4) described by a 21140 non-MII
> (0) block.
> tulip0: Index #5 - Media 100baseTx-FDX (#5) described by a 21140
> non-MII (0) block.
> tulip0: ***WARNING***: No MII transceiver found!
> eth0: ULi M5261/M5263 rev 64 at f884cc00, 00:0B:6A:D1:FC:B9, IRQ 17.
> ...
> eth0: Setting half-duplex based on MII#1 link partner capability of
> ffff.
> ...
>
> When I try to run mii-tool, it yields:
> # mii-tool eth0
> SIOCGMIIPHY on 'eth0' failed: No such device
>
>
> On Mon, 2005-07-25 at 14:16 +0200, Jiri Benc wrote:
>
> > Does tulip-fixes-for-uli5261.patch from -mm tree help?
> >
>
--
Ricardo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
