Hi, my card is impossible to be autodetected. Valid sections for it's identification are missing.
I asked for this some time ago. I need to use insmod option. Michal On Sun, 31 Jul 2005, Michael Krufky wrote: > Andrew Morton wrote: > > >Michal Semler <[EMAIL PROTECTED]> wrote: > > > > > >> This is what I gets into dmesg: > >> > >> Linux video capture interface: v1.00 > >> bttv: driver version 0.9.15 loaded > >> bttv: using 8 buffers with 2080k (520 pages) each for capture > >> bttv: Bt8xx card found (0). > >> ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKH] -> GSI 9 (level, low) -> > >> IRQ 9 > >> bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 9, latency: 32, mmio: > >> 0xb69fe000 > >> bttv0: using: ProVideo PV951 [card=42,insmod option] > >> bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] > >> bttv0: using tuner=1 > >> bttv0: i2c: checking for TDA9875 @ 0xb0... not found > >> bttv0: i2c: checking for TDA7432 @ 0x8a... not found > >> tvaudio: TV audio decoder + audio/video mux driver > >> tvaudio: known chips: > >> tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 > >> (PV951),ta8874z > >> tvaudio: found pic16c54 (PV951) @ 0x96 > >> bttv0: i2c: checking for TDA9887 @ 0x86... not found > >> tuner: Unknown parameter `type' > >> bttv0: registered device video0 > >> bttv0: registered device vbi0 > >> bttv0: registered device radio0 > >> bttv0: PLL: 28636363 => 35468950 .. ok > >> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 > >> PCI: setting IRQ 10 as level-triggered > >> ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [LNKB] -> GSI 10 (level, low) > >> -> > >> IRQ 10 > >> > >> > > > >(cc the v4l list) > > > >The above is with 2.6.13-rc4. 2.6.11 was OK. > > > > > Michael- > > Please remove the insmod options: > > bttv0: using: ProVideo PV951 [card=42,insmod option] > > ...and show us dmesg output with autodetection. > > Also, please try CVS and tell us if you still have the problem... > Instructions at: > > http://linuxtv.org/v4lwiki/index.php/How_to_build_from_CVS > > -- > Michael Krufky > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
