Add mma9553_ prefix to all local functions/declarations.

Signed-off-by: Irina Tirdea <irina.tir...@intel.com>
Suggested-by: Hartmut Knaack <knaac...@gmx.de>
---
 drivers/iio/accel/mma9553.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
index 47cb14b..9573147 100644
--- a/drivers/iio/accel/mma9553.c
+++ b/drivers/iio/accel/mma9553.c
@@ -76,8 +76,8 @@
 #define MMA9553_DEFAULT_GPIO_PIN       mma9551_gpio6
 #define MMA9553_DEFAULT_GPIO_POLARITY  0
 
-#define STATUS_TO_BITNUM(bit)          (ffs(bit) - 9)
 /* Bitnum used for GPIO configuration = bit number in high status byte */
+#define MMA9553_STATUS_TO_BITNUM(bit)  (ffs(bit) - 9)
 
 #define MMA9553_DEFAULT_SAMPLE_RATE    30      /* Hz */
 
@@ -351,11 +351,11 @@ static int mma9553_conf_gpio(struct mma9553_data *data)
         * This bit is the logical OR of the SUSPCHG, STEPCHG, and ACTCHG flags.
         */
        if (activity_enabled && ev_step_detect->enabled)
-               bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_MRGFL);
+               bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_MRGFL);
        else if (ev_step_detect->enabled)
-               bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_STEPCHG);
+               bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_STEPCHG);
        else if (activity_enabled)
-               bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_ACTCHG);
+               bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_ACTCHG);
        else                    /* Reset */
                appid = MMA9551_APPID_NONE;
 
@@ -948,11 +948,11 @@ static const struct iio_event_spec 
mma9553_activity_events[] = {
        },
 };
 
-static const char * const calibgender_modes[] = { "male", "female" };
+static const char * const mma9553_calibgender_modes[] = { "male", "female" };
 
 static const struct iio_enum mma9553_calibgender_enum = {
-       .items = calibgender_modes,
-       .num_items = ARRAY_SIZE(calibgender_modes),
+       .items = mma9553_calibgender_modes,
+       .num_items = ARRAY_SIZE(mma9553_calibgender_modes),
        .get = mma9553_get_calibgender_mode,
        .set = mma9553_set_calibgender_mode,
 };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to