Initial value of gpio bitnum is set to -1, but
the variable is declared as unsigned.
Use a positive invalid value for initial gpio
bitnum.
Signed-off-by: Irina Tirdea <irina.tir...@intel.com>
Suggested-by: Hartmut Knaack <knaac...@gmx.de>
---
drivers/iio/accel/mma9553.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
index 9cfedb5..d781999 100644
--- a/drivers/iio/accel/mma9553.c
+++ b/drivers/iio/accel/mma9553.c
@@ -78,6 +78,7 @@
/* Bitnum used for GPIO configuration = bit number in high status byte */
#define MMA9553_STATUS_TO_BITNUM(bit) (ffs(bit) - 9)
+#define MMA9553_MAX_BITNUM MMA9553_STATUS_TO_BITNUM(BIT(16))
#define MMA9553_DEFAULT_SAMPLE_RATE 30 /* Hz */
@@ -406,8 +407,8 @@ static int mma9553_init(struct mma9553_data *data)
}
- data->gpio_bitnum = -1;
/* Reset GPIO */
+ data->gpio_bitnum = MMA9553_MAX_BITNUM;
ret = mma9553_conf_gpio(data);
if (ret < 0)
return ret;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
