Lots of platforms contain clocks which if turned off would prove fatal.
The only way to recover from these catastrophic failures is to restart
the board(s). Now, when a clock provider is registered with the
framework it is possible for a list of always-on clocks to be supplied
which must be kept ungated. Each clock mentioned in the newly
introduced 'clock-always-on' will be clk_prepare_enable()d where the
normal references will be taken. This will prevent the common clk
framework from attempting to gate them during the clk_disable_unused()
and disable_clock() procedures.
Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
drivers/clk/clk-conf.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-conf.c b/drivers/clk/clk-conf.c
index aad4796..a07aced 100644
--- a/drivers/clk/clk-conf.c
+++ b/drivers/clk/clk-conf.c
@@ -116,6 +116,43 @@ static int __set_clk_rates(struct device_node *node, bool
clk_supplier)
return 0;
}
+static int __set_clk_always_on(struct device_node *node, bool clk_supplier)
+{
+ struct of_phandle_args clkspec;
+ struct clk *clk;
+ struct property *prop;
+ const __be32 *cur;
+ uint32_t index;
+ int ret;
+
+ if (!clk_supplier)
+ return 0;
+
+ of_property_for_each_u32(node, "clock-always-on", prop, cur, index) {
+ clkspec.np = node;
+ clkspec.args_count = 1;
+ clkspec.args[0] = index;
+
+ clk = of_clk_get_from_provider(&clkspec);
+ if (IS_ERR(clk)) {
+ pr_err("clk: couldn't get clock %u for %s\n",
+ index, node->full_name);
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("Failed to enable clock %u for %s: %d\n",
+ index, node->full_name, ret);
+ return ret;
+ }
+
+ pr_debug("Setting clock as always-on %pC\n", clk);
+ }
+
+ return 0;
+}
+
/**
* of_clk_set_defaults() - parse and set assigned clocks configuration
* @node: device node to apply clock settings for
@@ -139,6 +176,10 @@ int of_clk_set_defaults(struct device_node *node, bool
clk_supplier)
if (rc < 0)
return rc;
- return __set_clk_rates(node, clk_supplier);
+ rc = __set_clk_rates(node, clk_supplier);
+ if (rc < 0)
+ return rc;
+
+ return __set_clk_always_on(node, clk_supplier);
}
EXPORT_SYMBOL_GPL(of_clk_set_defaults);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
