Although the SPFI BITCLK divider supports a value of up to 255, only
values up to 128 are usable. This results in a maximum possible bit
clock rate of 1/4th the input clock rate.
Signed-off-by: Andrew Bresticker <abres...@chromium.org>
---
drivers/spi/spi-img-spfi.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index e649bc7..7d18bec 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -405,10 +405,10 @@ static void img_spfi_config(struct spi_master *master,
struct spi_device *spi,
/*
* output = spfi_clk * (BITCLK / 512), where BITCLK must be a
- * power of 2 up to 256 (where 255 == 256 since BITCLK is 8 bits)
+ * power of 2 up to 128
*/
- div = DIV_ROUND_UP(master->max_speed_hz, xfer->speed_hz);
- div = clamp(512 / (1 << get_count_order(div)), 1, 255);
+ div = DIV_ROUND_UP(clk_get_rate(spfi->spfi_clk), xfer->speed_hz);
+ div = clamp(512 / (1 << get_count_order(div)), 1, 128);
val = spfi_readl(spfi, SPFI_DEVICE_PARAMETER(spi->chip_select));
val &= ~(SPFI_DEVICE_PARAMETER_BITCLK_MASK <<
@@ -594,8 +594,8 @@ static int img_spfi_probe(struct platform_device *pdev)
master->num_chipselect = 5;
master->dev.of_node = pdev->dev.of_node;
master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(8);
- master->max_speed_hz = clk_get_rate(spfi->spfi_clk);
- master->min_speed_hz = master->max_speed_hz / 512;
+ master->max_speed_hz = clk_get_rate(spfi->spfi_clk) / 4;
+ master->min_speed_hz = clk_get_rate(spfi->spfi_clk) / 512;
master->set_cs = img_spfi_set_cs;
master->transfer_one = img_spfi_transfer_one;
--
2.2.0.rc0.207.ga3a616c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
