Change function definition to static, move the function further up in
the file, and delete the function prototype.
This fixes the following warning generated by sparse:
drivers/staging/rtl8192u/r8192U_core.c:1970:6: warning: symbol
'rtl8192_update_ratr_table' was not declared. Should it be static?
Signed-off-by: Eddie Kovsky <e...@edkovsky.org>
---
drivers/staging/rtl8192u/r8192U_core.c | 87 +++++++++++++++++-----------------
1 file changed, 44 insertions(+), 43 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c
b/drivers/staging/rtl8192u/r8192U_core.c
index 8834c23d67fc..f16a0a45611f 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1762,7 +1762,50 @@ void rtl8192_usb_deleteendpoints(struct net_device *dev)
}
#endif
-static void rtl8192_update_ratr_table(struct net_device *dev);
+static void rtl8192_update_ratr_table(struct net_device *dev)
+{
+ struct r8192_priv *priv = ieee80211_priv(dev);
+ struct ieee80211_device *ieee = priv->ieee80211;
+ u8 *pMcsRate = ieee->dot11HTOperationalRateSet;
+ u32 ratr_value = 0;
+ u8 rate_index = 0;
+ rtl8192_config_rate(dev, (u16 *)(&ratr_value));
+
+ ratr_value |= (*(u16 *)(pMcsRate)) << 12;
+ switch (ieee->mode) {
+ case IEEE_A:
+ ratr_value &= 0x00000FF0;
+ break;
+ case IEEE_B:
+ ratr_value &= 0x0000000F;
+ break;
+ case IEEE_G:
+ ratr_value &= 0x00000FF7;
+ break;
+ case IEEE_N_24G:
+ case IEEE_N_5G:
+ if (ieee->pHTInfo->PeerMimoPs == 0) { /* MIMO_PS_STATIC */
+ ratr_value &= 0x0007F007;
+ } else {
+ if (priv->rf_type == RF_1T2R)
+ ratr_value &= 0x000FF007;
+ else
+ ratr_value &= 0x0F81F007;
+ }
+ break;
+ default:
+ break;
+ }
+ ratr_value &= 0x0FFFFFFF;
+ if (ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz)
+ ratr_value |= 0x80000000;
+ else if (!ieee->pHTInfo->bCurTxBW40MHz &&
ieee->pHTInfo->bCurShortGI20MHz)
+ ratr_value |= 0x80000000;
+ write_nic_dword(dev, RATR0+rate_index*4, ratr_value);
+ write_nic_byte(dev, UFWP, 1);
+}
+
+
static void rtl8192_link_change(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1967,48 +2010,6 @@ static int rtl8192_handle_assoc_response(struct
net_device *dev,
}
-void rtl8192_update_ratr_table(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee80211;
- u8 *pMcsRate = ieee->dot11HTOperationalRateSet;
- u32 ratr_value = 0;
- u8 rate_index = 0;
- rtl8192_config_rate(dev, (u16 *)(&ratr_value));
- ratr_value |= (*(u16 *)(pMcsRate)) << 12;
- switch (ieee->mode) {
- case IEEE_A:
- ratr_value &= 0x00000FF0;
- break;
- case IEEE_B:
- ratr_value &= 0x0000000F;
- break;
- case IEEE_G:
- ratr_value &= 0x00000FF7;
- break;
- case IEEE_N_24G:
- case IEEE_N_5G:
- if (ieee->pHTInfo->PeerMimoPs == 0) { /* MIMO_PS_STATIC */
- ratr_value &= 0x0007F007;
- } else {
- if (priv->rf_type == RF_1T2R)
- ratr_value &= 0x000FF007;
- else
- ratr_value &= 0x0F81F007;
- }
- break;
- default:
- break;
- }
- ratr_value &= 0x0FFFFFFF;
- if (ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz)
- ratr_value |= 0x80000000;
- else if (!ieee->pHTInfo->bCurTxBW40MHz &&
ieee->pHTInfo->bCurShortGI20MHz)
- ratr_value |= 0x80000000;
- write_nic_dword(dev, RATR0+rate_index*4, ratr_value);
- write_nic_byte(dev, UFWP, 1);
-}
-
static u8 ccmp_ie[4] = {0x00, 0x50, 0xf2, 0x04};
static u8 ccmp_rsn_ie[4] = {0x00, 0x0f, 0xac, 0x04};
static bool GetNmodeSupportBySecCfg8192(struct net_device *dev)
--
2.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
