On Fri, 2015-03-06 at 09:46 +0000, Hiroshi Shimamoto wrote: > > On Fri, 2015-03-06 at 06:04 +0000, Hiroshi Shimamoto wrote: > > > > From: Hiroshi Shimamoto <h-shimam...@ct.jp.nec.com> > > > > > > > > Disable hardware VLAN filtering if netdev->features VLAN flag is > > > dropped. > > > > > > > > In SR-IOV case, there is a use case which needs to disable VLAN > > > filter. > > > > For example, we need to make a network function with VF in > > > virtualized > > > > environment. That network function may be a software switch, a > > > router > > > > or etc. It means that that network function will be an end point > > > which > > > > terminates many VLANs. > > > > > > > > In the current implementation, VLAN filtering always be turned on > > > and > > > > VF can receive only 63 VLANs. It means that only 63 VLANs can be > > > terminated > > > > in one NIC. > > > > > > > > With this patch, if the user turns VLAN filtering off on the host, > > > VF > > > > can receive every VLAN packet. > > > > > > > > This VLAN filtering can be turned on or off when SR-IOV is disabled, > > > if not > > > > the operation is rejected. > > > > > > Hi, > > > > > > any comment about this? > > > I added a warning message and prevent operation during SR-IOV is > > > enabled. > > > > Yes, the warning message you added says nothing of the huge security > > hole this exposes. We need a message the correctly expresses the > > dangers in turning this off. > > hm okay. > Do you mean I should add a message like "this causes SECURITY issue", right?
Correct, you will need to notify the user that by turning off VLAN filtering, this opens up serious security issues. The message should well inform the user of the potential dangers, so that if someone gets hacked or information gets stolen because they turning off VLAN filtering, that is was due to their choice to turn off this feature and not a design flaw in the driver. > > > > Also it does not appear that you addressed Ben Hutchings concerns, as I > > asked. Correct me if I am wrong and you did address Ben's concerns. > > I think Ben's suggestion is to prevent turn VLAN filtering back on during > VFs are used because that breaks guest's behavior. > I added the code that make it impossible. We cannot turn on (or off) if > the NIC has VFs. And notify them that one they turn it off, then cannot turn it back on if the NIC has VFs, so they will remain exposed and will continue to have serious security issues. > > thanks, > Hiroshi
signature.asc
Description: This is a digitally signed message part
