Some of the PMIC's could have specific regmap configuration tables in future, so add specific compatible strings for known PMIC's. Also print runtime detected chip revision information.
Signed-off-by: Ivan T. Ivanov <iiva...@mm-sol.com> --- Changes since first version of this patch[1]: - Drop run compatible property update. Method did't work for modules. - Use more compact way to print detected chip name and revision. - Properly check regmap_read error codes. - Fix devicetree bindings description. - Rename patch description. [1] https://lkml.org/lkml/2014/11/4/425 .../devicetree/bindings/mfd/qcom,spmi-pmic.txt | 19 ++++- drivers/mfd/qcom-spmi-pmic.c | 98 ++++++++++++++++++++-- 2 files changed, 106 insertions(+), 11 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt index 7182b88..6ac06c1 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt @@ -15,10 +15,21 @@ each. A function can consume one or more of these fixed-size register regions. Required properties: - compatible: Should contain one of: - "qcom,pm8941" - "qcom,pm8841" - "qcom,pma8084" - or generalized "qcom,spmi-pmic". + "qcom,pm8941", + "qcom,pm8841", + "qcom,pma8084", + "qcom,pm8019", + "qcom,pm8226", + "qcom,pm8110", + "qcom,pma8084", + "qcom,pmi8962", + "qcom,pmd9635", + "qcom,pm8994", + "qcom,pmi8994", + "qcom,pm8916", + "qcom,pm8004", + "qcom,pm8909", + or generalized "qcom,spmi-pmic". - reg: Specifies the SPMI USID slave address for this device. For more information see: Documentation/devicetree/bindings/spmi/spmi.txt diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c index 4b8beb2..a1af4e5 100644 --- a/drivers/mfd/qcom-spmi-pmic.c +++ b/drivers/mfd/qcom-spmi-pmic.c @@ -17,6 +17,95 @@ #include <linux/regmap.h> #include <linux/of_platform.h> +#define PMIC_REV2 0x101 +#define PMIC_REV3 0x102 +#define PMIC_REV4 0x103 +#define PMIC_TYPE 0x104 +#define PMIC_SUBTYPE 0x105 + +#define PMIC_TYPE_VALUE 0x51 + +#define COMMON_SUBTYPE 0x00 +#define PM8941_SUBTYPE 0x01 +#define PM8841_SUBTYPE 0x02 +#define PM8019_SUBTYPE 0x03 +#define PM8226_SUBTYPE 0x04 +#define PM8110_SUBTYPE 0x05 +#define PMA8084_SUBTYPE 0x06 +#define PMI8962_SUBTYPE 0x07 +#define PMD9635_SUBTYPE 0x08 +#define PM8994_SUBTYPE 0x09 +#define PMI8994_SUBTYPE 0x0a +#define PM8916_SUBTYPE 0x0b +#define PM8004_SUBTYPE 0x0c +#define PM8909_SUBTYPE 0x0d + +static const struct of_device_id pmic_spmi_id_table[] = { + [COMMON_SUBTYPE] = { .compatible = "qcom,spmi-pmic" }, + [PM8941_SUBTYPE] = { .compatible = "qcom,pm8941" }, + [PM8841_SUBTYPE] = { .compatible = "qcom,pm8841" }, + [PM8019_SUBTYPE] = { .compatible = "qcom,pm8019" }, + [PM8226_SUBTYPE] = { .compatible = "qcom,pm8226" }, + [PM8110_SUBTYPE] = { .compatible = "qcom,pm8110" }, + [PMA8084_SUBTYPE] = { .compatible = "qcom,pma8084" }, + [PMI8962_SUBTYPE] = { .compatible = "qcom,pmi8962" }, + [PMD9635_SUBTYPE] = { .compatible = "qcom,pmd9635" }, + [PM8994_SUBTYPE] = { .compatible = "qcom,pm8994" }, + [PMI8994_SUBTYPE] = { .compatible = "qcom,pmi8994" }, + [PM8916_SUBTYPE] = { .compatible = "qcom,pm8916" }, + [PM8004_SUBTYPE] = { .compatible = "qcom,pm8004" }, + [PM8909_SUBTYPE] = { .compatible = "qcom,pm8909" }, + { } +}; + +static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) +{ + unsigned int rev2, minor, major, type, subtype; + int ret; + + ret = regmap_read(map, PMIC_TYPE, &type); + if (ret < 0) + return; + + if (type != PMIC_TYPE_VALUE) + return; + + ret = regmap_read(map, PMIC_SUBTYPE, &subtype); + if (ret < 0) + return; + + if (subtype > ARRAY_SIZE(pmic_spmi_id_table)) + return; + + rev2 = regmap_read(map, PMIC_REV2, &rev2); + if (rev2 < 0) + return; + + minor = regmap_read(map, PMIC_REV3, &minor); + if (minor < 0) + return; + + major = regmap_read(map, PMIC_REV4, &major); + if (major < 0) + return; + + /* + * In early versions of PM8941 and PM8226, the major revision number + * started incrementing from 0 (eg 0 = v1.0, 1 = v2.0). + * Increment the major revision number here if the chip is an early + * version of PM8941 or PM8226. + */ + if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) && + major < 0x02) + major++; + + if (subtype == PM8110_SUBTYPE) + minor = rev2; + + dev_info(dev, "%s-v%d.%d detected\n", + pmic_spmi_id_table[subtype].compatible, major, minor); +} + static const struct regmap_config spmi_regmap_config = { .reg_bits = 16, .val_bits = 8, @@ -33,6 +122,8 @@ static int pmic_spmi_probe(struct spmi_device *sdev) if (IS_ERR(regmap)) return PTR_ERR(regmap); + pmic_spmi_show_revid(regmap, &sdev->dev); + return of_platform_populate(root, NULL, NULL, &sdev->dev); } @@ -41,13 +132,6 @@ static void pmic_spmi_remove(struct spmi_device *sdev) of_platform_depopulate(&sdev->dev); } -static const struct of_device_id pmic_spmi_id_table[] = { - { .compatible = "qcom,spmi-pmic" }, - { .compatible = "qcom,pm8941" }, - { .compatible = "qcom,pm8841" }, - { .compatible = "qcom,pma8084" }, - { } -}; MODULE_DEVICE_TABLE(of, pmic_spmi_id_table); static struct spmi_driver pmic_spmi_driver = { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
