On Tue, Feb 17, 2015 at 02:27:13PM -0500, Benjamin Tissoires wrote:
> The stylus of this device works just fine out of the box.
> The touch is seen by default as a mouse with relative events and some
> gestures.
> Switching the default in raw mode allows us to retrieve the touch data
> and have a consistent user experience accross all the multitouch touchpads.
>
> Note that the buttons of this devices are reported through the touch
> interface. There is no 'Pad' interface. It seemed more natural to have
> the BTN_LEFT and BTN_RIGHT reported with the touch because they are
> placed under the touch interface and it looks like they belong to the
> touch part.
>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoi...@redhat.com>
> ---
>
> Hi,
>
> several things before we can merge this:
>
> Josep, Frederic:
> Would you mind testing this patch with your Bamboo pads? I bought the wireless
> variant and the USB one has a different ProductID. Hopefully, it will go
> smoothly with the current patch.
>
> Peter, Ping, Jason:
> Given the nature of the device, I did not exported the 2 buttons as a separate
> pad device.
> Do you back me up with this choice?
yeah, agree - this looks more like a touchpad than a touch-enabled tablet.
Cheers,
Peter
> Jiri:
> As mentioned to Josep and Frederic, this has not been tested against the USB
> (wired) version of the device. So please wait at least for one tested-by
> before
> considering including this patch.
>
> Thanks everyone!
> Benjamin
>
> drivers/hid/wacom_sys.c | 23 ++++++++++++++++++
> drivers/hid/wacom_wac.c | 62
> +++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/hid/wacom_wac.h | 3 +++
> 3 files changed, 88 insertions(+)
>
> diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
> index e1ec192..ef4d147 100644
> --- a/drivers/hid/wacom_sys.c
> +++ b/drivers/hid/wacom_sys.c
> @@ -410,6 +410,9 @@ static int wacom_query_tablet_data(struct hid_device
> *hdev,
> else if (features->type == WACOM_27QHDT) {
> return wacom_set_device_mode(hdev, 131, 3, 2);
> }
> + else if (features->type == BAMBOO_PAD) {
> + return wacom_set_device_mode(hdev, 2, 2, 3);
> + }
> } else if (features->device_type == BTN_TOOL_PEN) {
> if (features->type <= BAMBOO_PT && features->type != WIRELESS) {
> return wacom_set_device_mode(hdev, 2, 2, 2);
> @@ -1417,6 +1420,20 @@ static int wacom_probe(struct hid_device *hdev,
> goto fail_allocate_inputs;
> }
>
> + /*
> + * Bamboo Pad has a generic hid handling for the Pen, and we switch it
> + * into debug mode for the touch part.
> + * We ignore the other interfaces.
> + */
> + if (features->type == BAMBOO_PAD) {
> + if (features->pktlen == WACOM_PKGLEN_PENABLED) {
> + features->type = HID_GENERIC;
> + } else if (features->pktlen != WACOM_PKGLEN_BP_TOUCH) {
> + error = -ENODEV;
> + goto fail_shared_data;
> + }
> + }
> +
> /* set the default size in case we do not get them from hid */
> wacom_set_default_phy(features);
>
> @@ -1451,6 +1468,12 @@ static int wacom_probe(struct hid_device *hdev,
> features->y_max = 4096;
> }
>
> + /*
> + * Same thing for Bamboo PAD
> + */
> + if (features->type == BAMBOO_PAD)
> + features->device_type = BTN_TOOL_FINGER;
> +
> if (hdev->bus == BUS_BLUETOOTH)
> features->quirks |= WACOM_QUIRK_BATTERY;
>
> diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
> index 1a65079..8627581 100644
> --- a/drivers/hid/wacom_wac.c
> +++ b/drivers/hid/wacom_wac.c
> @@ -1826,6 +1826,49 @@ static int wacom_bpt_irq(struct wacom_wac *wacom,
> size_t len)
> return 0;
> }
>
> +static int wacom_bamboo_pad_irq(struct wacom_wac *wacom, size_t len)
> +{
> + struct input_dev *input = wacom->input;
> + unsigned char *data = wacom->data;
> + unsigned char *finger_data, prefix;
> + unsigned id;
> + int x, y;
> + bool valid;
> +
> + /* bit 2 in data[1] is set when there is touch information available */
> + if ((len != WACOM_PKGLEN_BP_TOUCH) ||
> + (data[0] != WACOM_REPORT_BP_TOUCH) ||
> + !(data[1] & 0x02))
> + return 0;
> +
> + prefix = data[9];
> +
> + for (id = 0; id < wacom->features.touch_max; id++) {
> + valid = !!(prefix & BIT(id)) &&
> + !wacom->shared->stylus_in_proximity;
> +
> + input_mt_slot(input, id);
> + input_mt_report_slot_state(input, MT_TOOL_FINGER, valid);
> +
> + if (!valid)
> + continue;
> +
> + finger_data = data + 10 + id * 3;
> + x = finger_data[0] | ((finger_data[1] & 0x0f) << 8);
> + y = (finger_data[2] << 4) | (finger_data[1] >> 4);
> +
> + input_report_abs(input, ABS_MT_POSITION_X, x);
> + input_report_abs(input, ABS_MT_POSITION_Y, y);
> + }
> +
> + input_mt_sync_frame(input);
> +
> + input_report_key(input, BTN_LEFT, prefix & 0x40);
> + input_report_key(input, BTN_RIGHT, prefix & 0x80);
> +
> + return 1;
> +}
> +
> static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
> {
> unsigned char *data = wacom->data;
> @@ -1962,6 +2005,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t
> len)
> sync = wacom_bpt_irq(wacom_wac, len);
> break;
>
> + case BAMBOO_PAD:
> + sync = wacom_bamboo_pad_irq(wacom_wac, len);
> + break;
> +
> case WIRELESS:
> sync = wacom_wireless_irq(wacom_wac, len);
> break;
> @@ -2300,6 +2347,13 @@ int wacom_setup_pentouch_input_capabilities(struct
> input_dev *input_dev,
> 0, 0);
> }
> break;
> + case BAMBOO_PAD:
> + __clear_bit(ABS_MISC, input_dev->absbit);
> + input_mt_init_slots(input_dev, features->touch_max,
> + INPUT_MT_POINTER);
> + __set_bit(BTN_LEFT, input_dev->keybit);
> + __set_bit(BTN_RIGHT, input_dev->keybit);
> + break;
> }
> return 0;
> }
> @@ -2953,6 +3007,12 @@ static const struct wacom_features
> wacom_features_0x30C =
> { "Wacom ISDv5 30C", .type = WACOM_24HDT, /* Touch */
> .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30A, .touch_max = 10,
> .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
> +static const struct wacom_features wacom_features_0x318 =
> + { "Wacom USB Bamboo PAD", 4095, 4095, /* Touch */
> + .type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
> +static const struct wacom_features wacom_features_0x319 =
> + { "Wacom Wireless Bamboo PAD", 4095, 4095, /* Touch */
> + .type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
> static const struct wacom_features wacom_features_0x323 =
> { "Wacom Intuos P M", 21600, 13500, 1023, 31,
> INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
> @@ -3101,6 +3161,8 @@ const struct hid_device_id wacom_ids[] = {
> { USB_DEVICE_WACOM(0x314) },
> { USB_DEVICE_WACOM(0x315) },
> { USB_DEVICE_WACOM(0x317) },
> + { USB_DEVICE_WACOM(0x318) },
> + { USB_DEVICE_WACOM(0x319) },
> { USB_DEVICE_WACOM(0x323) },
> { USB_DEVICE_WACOM(0x32A) },
> { USB_DEVICE_WACOM(0x32B) },
> diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
> index 021ee1c..bf43e0f 100644
> --- a/drivers/hid/wacom_wac.h
> +++ b/drivers/hid/wacom_wac.h
> @@ -33,6 +33,7 @@
> #define WACOM_PKGLEN_MTTPC 40
> #define WACOM_PKGLEN_DTUS 68
> #define WACOM_PKGLEN_PENABLED 8
> +#define WACOM_PKGLEN_BP_TOUCH 32
>
> /* wacom data size per MT contact */
> #define WACOM_BYTES_PER_MT_PACKET 11
> @@ -67,6 +68,7 @@
> #define WACOM_REPORT_24HDT 1
> #define WACOM_REPORT_WL 128
> #define WACOM_REPORT_USB 192
> +#define WACOM_REPORT_BP_TOUCH 16
>
> /* device quirks */
> #define WACOM_QUIRK_MULTI_INPUT 0x0001
> @@ -122,6 +124,7 @@ enum {
> BAMBOO_PT,
> WACOM_24HDT,
> WACOM_27QHDT,
> + BAMBOO_PAD,
> TABLETPC, /* add new TPC below */
> TABLETPCE,
> TABLETPC2FG,
> --
> 2.1.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
