Hi, Boris

On 2/9/2015 5:24 PM, Boris Brezillon wrote:
Hi Josh,

On Mon, 9 Feb 2015 17:17:03 +0800
Josh Wu <josh...@atmel.com> wrote:

Add at91 sama5d4 xplained board support.

Signed-off-by: Josh Wu <josh...@atmel.com>
---

Changes in v2:
- to be sorted by memory address, put the adc dt node after usart4.

  arch/arm/boot/dts/Makefile                  |   1 +
  arch/arm/boot/dts/at91-sama5d4_xplained.dts | 232 ++++++++++++++++++++++++++++
  2 files changed, 233 insertions(+)
  create mode 100644 arch/arm/boot/dts/at91-sama5d4_xplained.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 91bd5bd..bbfbad6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_AT91)       += sama5d34ek.dtb
  dtb-$(CONFIG_ARCH_AT91)       += sama5d35ek.dtb
  dtb-$(CONFIG_ARCH_AT91)       += sama5d36ek.dtb
  # sama5d4
+dtb-$(CONFIG_ARCH_AT91)        += at91-sama5d4_xplained.dtb
  dtb-$(CONFIG_ARCH_AT91)       += at91-sama5d4ek.dtb
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts 
b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
new file mode 100644
index 0000000..a04c3c8
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -0,0 +1,232 @@
+/*
+ * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Josh Wu <josh...@atmel.com>
+ *
[...]

+       ahb {
+               apb {
+                       spi0: spi@f8010000 {
+                               cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+                               status = "okay";
+                               m25p80@0 {
+                                       compatible = "atmel,at25df321a";
+                                       spi-max-frequency = <50000000>;
+                                       reg = <0>;
+                               };
+                       };
+
+                       macb0: ethernet@f8020000 {
+                               phy-mode = "rmii";
+                               status = "okay";
Could you define the PHY device attached to this ethernet MAC IP ?


                                 ethernet-phy@1 {
                                         reg = <0x1>;
                                         /*
                                         * interrupt-parent = <&pioB>;
                                         * interrupts = <25
                                         *         IRQ_TYPE_EDGE_FALLING>;
                                         */
                                        /* ... */
                                };
Ok, I will add this in next version. Thanks.

Best Regards,
Josh Wu



Best Regards,

Boris


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to