Hi Robert, Le Tuesday 27 January 2015 à 08:59 +0100, Robert Rosengren a écrit : > On 01/16/2015 07:30 PM, Guenter Roeck wrote: > > I sent a couple of patches a minute ago which should take care of the issue. > > Would be great if you can test it. > I applied the v2 versions of the patches for a quick test, but it was > not successful. Haven't done any further investigation on what the > problem might be, but when trying to read the sysfs driver I get "read > error: No such device or address". > > The sysfs path have moved with the REGMAP settings, from > /sys/bus/i2c/devices/<x>/in0_input to > /sys/bus/i2c/devices/<x>/hwmon/hwmon0/in0_input.
This is expected, shouldn't be an issue if you are using a libsensors-based application with a recent enough version of libsensors. > Any ideas? Haven't had REGMAP configured in my kernel earlier, might it > be some specific configuration I miss? How are you testing/reading exactly? -- Jean Delvare SUSE L3 Support -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
