Correct one coding style problem(detected by checkpatch.pl) in pcl818.c.
- code indent should use tabs where possible
Signed-off-by: Simon Guo <wei.guo.si...@gmail.com>
---
drivers/staging/comedi/drivers/pcl818.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl818.c
b/drivers/staging/comedi/drivers/pcl818.c
index ba2e137..72a700c 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -45,11 +45,11 @@ A word or two about DMA. Driver support DMA operations at
two ways:
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA (0=disable, 1, 3)
[3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
+ 1= 1MHz clock for 8254
[4] - 0, 5=A/D input -5V.. +5V
- 1, 10=A/D input -10V..+10V
+ 1, 10=A/D input -10V..+10V
[5] - 0, 5=D/A output 0-5V (internal reference -5V)
- 1, 10=D/A output 0-10V (internal reference -10V)
+ 1, 10=D/A output 0-10V (internal reference -10V)
2 =D/A output unknown (external reference)
Options for PCL-818, PCL-818H:
@@ -57,28 +57,28 @@ A word or two about DMA. Driver support DMA operations at
two ways:
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA (0=disable, 1, 3)
[3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
+ 1= 1MHz clock for 8254
[4] - 0, 5=D/A output 0-5V (internal reference -5V)
- 1, 10=D/A output 0-10V (internal reference -10V)
+ 1, 10=D/A output 0-10V (internal reference -10V)
2 =D/A output unknown (external reference)
Options for PCL-818HD, PCL-818HG:
[0] - IO Base
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA/FIFO (-1=use FIFO, 0=disable both FIFO and DMA,
- 1=use DMA ch 1, 3=use DMA ch 3)
+ 1=use DMA ch 1, 3=use DMA ch 3)
[3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
+ 1= 1MHz clock for 8254
[4] - 0, 5=D/A output 0-5V (internal reference -5V)
- 1, 10=D/A output 0-10V (internal reference -10V)
- 2 =D/A output unknown (external reference)
+ 1, 10=D/A output 0-10V (internal reference -10V)
+ 2 =D/A output unknown (external reference)
Options for PCL-718:
[0] - IO Base
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA (0=disable, 1, 3)
[3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
+ 1= 1MHz clock for 8254
[4] - 0=A/D Range is +/-10V
1= +/-5V
2= +/-2.5V
@@ -87,14 +87,14 @@ A word or two about DMA. Driver support DMA operations at
two ways:
5= user defined bipolar
6= 0-10V
7= 0-5V
- 8= 0-2V
+ 8= 0-2V
9= 0-1V
10= user defined unipolar
[5] - 0, 5=D/A outputs 0-5V (internal reference -5V)
- 1, 10=D/A outputs 0-10V (internal reference -10V)
+ 1, 10=D/A outputs 0-10V (internal reference -10V)
2=D/A outputs unknown (external reference)
[6] - 0, 60=max 60kHz A/D sampling
- 1,100=max 100kHz A/D sampling (PCL-718 with Option 001 installed)
+ 1,100=max 100kHz A/D sampling (PCL-718 with Option 001 installed)
*/
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
