On Thu, Jul 07 2005, Pekka Enberg wrote:
> Jens Axboe wrote:
> > > ATA7 defines a park maneuvre, I don't know how well supported it
is
> > > yet though. You can test with this little app, if it says 'head
> > > parked' it works. If not, it has just idled the drive.
>
> On 7/7/05, Lenz Grimmer <[EMAIL PROTECTED]> wrote:
> > Great! Thanks for digging this up - it works on my T42, using a
Fujitsu
> > MHT2080AH drive:
>
> Works on my T42p which uses a Hitachi HTS726060M9AT00 drive. I don't
> hear any sound, though.
Interesting. Same Notebook, same drive. The program say "not parked"
:-( This is on FC2 with a pretty much vanilla 2.6.9 kernel.
[EMAIL PROTECTED] tmp]# uname -a
Linux l15833 2.6.9-noagp #1 Wed May 4 16:09:14 CEST 2005 i686 i686 i386
GNU/Linux
[EMAIL PROTECTED] tmp]# hdparm -i /dev/hda
/dev/hda:
Model=HTS726060M9AT00, FwRev=MH4OA6BA, SerialNo=MRH403M4GS88XB
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=7877kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117210240
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:
* signifies the current active mode
[EMAIL PROTECTED] tmp]# ./park /dev/hda
head not parked 4c
[EMAIL PROTECTED] tmp]#
Cheers
Martin
------------------------------------------------------
Martin Knoblauch
email: k n o b i AT knobisoft DOT de
www: http://www.knobisoft.de
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
