On Tue, 20 Jan 2015, Krzysztof Kozlowski wrote:
> On wto, 2015-01-20 at 13:41 +0000, Lee Jones wrote:
> > On Mon, 05 Jan 2015, Krzysztof Kozlowski wrote:
> >
> > > Document usage of maxim,ena-gpios properties which turn on external/GPIO
> > > control over regulator.
> > >
> > > Signed-off-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
> > > ---
> > > Documentation/devicetree/bindings/mfd/max77686.txt | 14 ++++++++++++++
> > > 1 file changed, 14 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt
> > > b/Documentation/devicetree/bindings/mfd/max77686.txt
> > > index 75fdfaf41831..e39f0bc1f55e 100644
> > > --- a/Documentation/devicetree/bindings/mfd/max77686.txt
> > > +++ b/Documentation/devicetree/bindings/mfd/max77686.txt
> > > @@ -39,6 +39,12 @@ to get matched with their hardware counterparts as
> > > follow:
> > > -BUCKn : 1-4.
> > > Use standard regulator bindings for it ('regulator-off-in-suspend').
> > >
> > > + LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
> > > + control. To turn this feature on this property must be added to the
> > > regulator
> > > + sub-node:
> > > + - maxim,ena-gpios : one GPIO specifier enable control (the gpio
> > > + flags are actually ignored and always
> > > + ACTIVE_HIGH is used)
> >
> > How does this differ to the 'enable-gpio' property which has already
> > been defined?
>
> Strictly speaking - no difference, just a GPIO specifier.
>
> However the 'enable-gpio' property exists only for gpio-regulator. The
> regulator core does not support generic enable-gpio property and each
> driver implements it on its own.
>
> Anyway Mark Brown already applied this patch to his regulator tree.
Well if he has no issue with it, then I guess I don't.
> > > Example:
> > >
> > > @@ -65,4 +71,12 @@ Example:
> > > regulator-always-on;
> > > regulator-boot-on;
> > > };
> > > +
> > > + buck9_reg {
> > > + regulator-compatible = "BUCK9";
> > > + regulator-name = "CAM_ISP_CORE_1.2V";
> > > + regulator-min-microvolt = <1000000>;
> > > + regulator-max-microvolt = <1200000>;
> > > + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
> > > + };
> > > }
> >
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
