On Mon, Jan 19, 2015 at 03:23:58PM +0000, Aleksey Makarov wrote:
> The OCTEON SATA controller is currently found on cn71XX devices.
>
> Signed-off-by: David Daney <david.da...@cavium.com>
> Signed-off-by: Vinita Gupta <vgu...@caviumnetworks.com>
> [aleksey.maka...@auriga.com: preparing for submission,
> conflict resolution, fixes for the platform code]
> Signed-off-by: Aleksey Makarov <aleksey.maka...@auriga.com>
> ---
> .../devicetree/bindings/ata/ahci-platform.txt | 1 +
> .../devicetree/bindings/mips/cavium/sata-uctl.txt | 31 ++++++
> arch/mips/cavium-octeon/octeon-platform.c | 1 +
> drivers/ata/Kconfig | 9 ++
> drivers/ata/Makefile | 1 +
> drivers/ata/ahci_platform.c | 10 ++
> drivers/ata/sata_octeon.c | 107
> +++++++++++++++++++++
> 7 files changed, 160 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt
> create mode 100644 drivers/ata/sata_octeon.c
>
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> index 4ab09f2..1a5d3be 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> @@ -11,6 +11,7 @@ Required properties:
> - compatible : compatible string, one of:
> - "allwinner,sun4i-a10-ahci"
> - "hisilicon,hisi-ahci"
> + - "cavium,octeon-7130-ahci"
> - "ibm,476gtr-ahci"
> - "marvell,armada-380-ahci"
> - "snps,dwc-ahci"
> diff --git a/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt
> b/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt
> new file mode 100644
> index 0000000..222e66e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt
> @@ -0,0 +1,31 @@
> +* UCTL SATA controller glue
I'm not sure I follow. What does this mean?
> +
> +Properties:
> +- compatible: "cavium,octeon-7130-sata-uctl"
> +
> + Compatibility with the cn7130 SOC.
> +
> +- reg: The base address of the UCTL register bank.
> +
> +- #address-cells: Must be <2>.
> +
> +- #size-cells: Must be <2>.
> +
> +- ranges: Empty to signify direct mapping of the children.
Why can't these be any values which are sufficient to map children?
> +
> +Example:
> +
> + uctl@118006c000000 {
> + compatible = "cavium,octeon-7130-sata-uctl";
> + reg = <0x00011800 0x6c000000 0x00000000 0x00000100>;
> + ranges;
> + #address-cells = <0x00000002>;
> + #size-cells = <0x00000002>;
No need for all the zero-padding on these, they aren't addresses.
> + sata@16c00 {
> + compatible = "cavium,octeon-7130-ahci";
> + reg = <0x00016c00 0x00000000 0x00000000 0x00000200>;
> + interrupt-parent = <0x0000000d>;
> + interrupts = <0x00000002 0x00000004>;
> + cavium,qlm-trim-alias = "sata";
What's this property for? It wasn't documented above, and doesn't exist
in mainline.
[...]
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index ae41107..4a0e5e3 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o
> libahci_platform.o
> obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o
> libahci_platform.o
> obj-$(CONFIG_AHCI_TEGRA) += ahci_tegra.o libahci.o libahci_platform.o
> obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o
> +obj-$(CONFIG_SATA_OCTEON) += sata_octeon.o
>
> # SFF w/ custom DMA
> obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index 18d5398..bb36396 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -22,6 +22,12 @@
> #include <linux/ahci_platform.h>
> #include "ahci.h"
>
> +#if IS_ENABLED(CONFIG_SATA_OCTEON)
> +void ahci_octeon_config(struct platform_device *pdev);
> +#else
> +static inline void ahci_octeon_config(struct platform_device *pdev) {}
> +#endif
> +
> static const struct ata_port_info ahci_port_info = {
> .flags = AHCI_FLAG_COMMON,
> .pio_mask = ATA_PIO4,
> @@ -46,6 +52,9 @@ static int ahci_probe(struct platform_device *pdev)
> if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci"))
> hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ;
>
> + if (of_device_is_compatible(dev->of_node, "cavium,octeon-7130-ahci"))
> + ahci_octeon_config(pdev);
> +
If we really need this kind of thing, make a new struct and associate it
with of_device_id::data in the table below. Then we make this path free
from any device-specific code.
> rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info);
> if (rc)
> goto disable_resources;
> @@ -67,6 +76,7 @@ static const struct of_device_id ahci_of_match[] = {
> { .compatible = "ibm,476gtr-ahci", },
> { .compatible = "snps,dwc-ahci", },
> { .compatible = "hisilicon,hisi-ahci", },
> + { .compatible = "cavium,octeon-7130-ahci", },
> {},
I was under the impression that the strings other than "generic-ahci"
were only for compatibility with existing DTBs. Why do we need to add
new platform-specific strings here?
[...]
> +void ahci_octeon_config(struct platform_device *pdev)
> +{
> + union cvmx_sata_uctl_shim_cfg shim_cfg;
> +
> + /* set-up endian mode */
> + shim_cfg.u64 = cvmx_read_csr(CVMX_SATA_UCTL_SHIM_CFG);
> +#ifdef __BIG_ENDIAN
> + shim_cfg.s.dma_endian_mode = 1;
> + shim_cfg.s.csr_endian_mode = 1;
> +#else
> + shim_cfg.s.dma_endian_mode = 0;
> + shim_cfg.s.csr_endian_mode = 0;
> +#endif
> + shim_cfg.s.dma_read_cmd = 1; /* No allocate L2C */
> + cvmx_write_csr(CVMX_SATA_UCTL_SHIM_CFG, shim_cfg.u64);
> +
> + /* Set a good dma_mask */
> + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(64);
> + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
I thought a dma-ranges property in the DT could be used to set up the
DMA mask appropriately?
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
