January 16, 2015 18:31, Krzysztof Kozlowski wrote:
> On pią, 2015-01-16 at 17:59 +0900, James Ban wrote:
> > This is a patch for adding gpio control about enable/disable of buck.
> >
> > Signed-off-by: James Ban <james.ban.opensou...@diasemi.com>
> > ---
> >
> > This patch is relative to linux-next repository tag next-20150115.
> >
> >
> > .../devicetree/bindings/regulator/da9211.txt | 7 ++++++-
> > drivers/regulator/da9211-regulator.c | 6 ++++++
> > include/linux/regulator/da9211.h | 1 +
> > 3 files changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt
> b/Documentation/devicetree/bindings/regulator/da9211.txt
> > index 240019a..ad777ac 100644
> > --- a/Documentation/devicetree/bindings/regulator/da9211.txt
> > +++ b/Documentation/devicetree/bindings/regulator/da9211.txt
> > @@ -11,6 +11,7 @@ Required properties:
> > BUCKA and BUCKB.
> >
> > Optional properties:
> > +- buck-enable-platform-gpio: platform gpio for control of BUCKA/BUCKB.
> > - Any optional property defined in regulator.txt
> >
> > Example 1) DA9211
> > @@ -27,6 +28,7 @@ Example 1) DA9211
> > regulator-max-microvolt = <1570000>;
> > regulator-min-microamp = <2000000>;
> > regulator-max-microamp = <5000000>;
> > + buck-enable-platform-gpio = <&gpio 27 0>;
> > };
> > BUCKB {
> > regulator-name = "VBUCKB";
> > @@ -34,11 +36,12 @@ Example 1) DA9211
> > regulator-max-microvolt = <1570000>;
> > regulator-min-microamp = <2000000>;
> > regulator-max-microamp = <5000000>;
> > + buck-enable-platform-gpio = <&gpio 17 0>;
>
> The suffix was changed to "-gpios".
> (Documentation/devicetree/bindings/gpio/gpio.txt)
>
I will change it.
> > };
> > };
> > };
> >
> > -Example 2) DA92113
> > +Example 2) DA9213
> > pmic: da9213@68 {
> > compatible = "dlg,da9213";
> > reg = <0x68>;
> > @@ -51,6 +54,7 @@ Example 2) DA92113
> > regulator-max-microvolt = <1570000>;
> > regulator-min-microamp = <3000000>;
> > regulator-max-microamp = <6000000>;
> > + buck-enable-platform-gpio = <&gpio 27 0>;
> > };
> > BUCKB {
> > regulator-name = "VBUCKB";
> > @@ -58,6 +62,7 @@ Example 2) DA92113
> > regulator-max-microvolt = <1570000>;
> > regulator-min-microamp = <3000000>;
> > regulator-max-microamp = <6000000>;
> > + buck-enable-platform-gpio = <&gpio 17 0>;
> > };
> > };
> > };
> > diff --git a/drivers/regulator/da9211-regulator.c
> > b/drivers/regulator/da9211-
> regulator.c
> > index c78d210..d299b0f 100644
> > --- a/drivers/regulator/da9211-regulator.c
> > +++ b/drivers/regulator/da9211-regulator.c
> > @@ -24,6 +24,7 @@
> > #include <linux/regmap.h>
> > #include <linux/irq.h>
> > #include <linux/interrupt.h>
> > +#include <linux/of_gpio.h>
> > #include <linux/regulator/of_regulator.h>
> > #include <linux/regulator/da9211.h>
> > #include "da9211-regulator.h"
> > @@ -277,6 +278,10 @@ static struct da9211_pdata
> *da9211_parse_regulators_dt(
> >
> > pdata->init_data[n] = da9211_matches[i].init_data;
> >
> > + pdata->gpio_ren[n] =
> > + of_get_named_gpio(da9211_matches[i].of_node,
> > + "buck-enable-platform-gpio", 0);
> > +
> > n++;
> > }
> >
> > @@ -365,6 +370,7 @@ static int da9211_regulator_init(struct da9211 *chip)
> > config.driver_data = chip;
> > config.regmap = chip->regmap;
> > config.of_node = chip->dev->of_node;
> > + config.ena_gpio = chip->pdata->gpio_ren[i];
>
> Probably you want to set also config.ena_gpio_initialized because '0'
> could be a valid GPIO. However that could be inconsistent with
> platform_data for your driver so it's up to you.
>
I will set config.ena_gpio_initialized.
> Don't you have to enable the GPIO usage in the device (switch from I2C
> control to GPIO)?
>
We assume default setting for GPIO usage is programed in the device.
> Best regards,
> Krzysztof
>
> >
> > chip->rdev[i] = devm_regulator_register(chip->dev,
> > &da9211_regulators[i], &config);
> > diff --git a/include/linux/regulator/da9211.h
> > b/include/linux/regulator/da9211.h
> > index 5479394..530b5ea 100644
> > --- a/include/linux/regulator/da9211.h
> > +++ b/include/linux/regulator/da9211.h
> > @@ -32,6 +32,7 @@ struct da9211_pdata {
> > * 2 : 2 phase 2 buck
> > */
> > int num_buck;
> > + int gpio_ren[DA9211_MAX_REGULATORS];
> > struct regulator_init_data *init_data[DA9211_MAX_REGULATORS];
> > };
> > #endif
