> Part 1: The easy stuff.
>
> In many config submenus, the first menu option will enable the rest
> of the menu options. For these menus, It's appropriate to use the more
> convenient "menuconfig" keyword.
>
> I hope I got it right, especially the conversions to "if SYMBOL" and
> merging the "depends on"s. It looks right, but please check that.
>
> This patch is designed for 2.6.12; the patch for .13-rc1 will be posted
> tomorrow as a reply, unless there are major objections to this patch.
This is the same patch without the changes in /net, as requested by Sam
Ravnborg. It does include the first update.
--- a/drivers/md/Kconfig 2005-06-19 14:16:41.000000000 +0200
+++ b/drivers/md/Kconfig 2005-06-29 13:23:07.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "Multi-device support (RAID and LVM)"
-
-config MD
+menuconfig MD
bool "Multiple devices driver support (RAID and LVM)"
help
@@ -236,5 +234,2 @@ config DM_MULTIPATH_EMC
---help---
Multipath support for EMC CX/AX series hardware.
-
-endmenu
-
--- a/drivers/w1/Kconfig 2005-05-02 02:25:01.000000000 +0200
+++ b/drivers/w1/Kconfig 2005-06-29 13:25:37.000000000 +0200
@@ -1,6 +1,4 @@
-menu "Dallas's 1-wire bus"
-
-config W1
- tristate "Dallas's 1-wire support"
+menuconfig W1
+ tristate "Dallas's 1-wire bus support"
---help---
Dallas's 1-wire bus is usefull to connect slow 1-pin devices
@@ -54,4 +52,2 @@ config W1_SMEM
Say Y here if you want to connect 1-wire
simple 64bit memory rom(ds2401/ds2411/ds1990*) to you wire.
-
-endmenu
--- a/drivers/i2c/Kconfig 2004-08-14 07:36:32.000000000 +0200
+++ b/drivers/i2c/Kconfig 2005-06-29 13:32:15.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "I2C support"
-
-config I2C
+menuconfig I2C
tristate "I2C support"
---help---
@@ -73,5 +71,2 @@ config I2C_DEBUG_CHIP
a problem with I2C support and want to see more of what is going
on.
-
-endmenu
-
--- a/drivers/fc4/Kconfig 2004-08-14 07:36:56.000000000 +0200
+++ b/drivers/fc4/Kconfig 2005-06-29 13:33:48.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "Fibre Channel support"
-
-config FC4
+menuconfig FC4
tristate "Fibre Channel and FC4 SCSI support"
---help---
@@ -77,5 +75,2 @@ config SCSI_FCAL
prompt "Generic FC-AL disk driver"
depends on FC4!=n && SCSI && !SPARC32 && !SPARC64
-
-endmenu
-
--- a/drivers/ide/Kconfig 2005-06-19 14:16:37.000000000 +0200
+++ b/drivers/ide/Kconfig 2005-06-29 13:40:15.000000000 +0200
@@ -5,7 +5,5 @@
#
-menu "ATA/ATAPI/MFM/RLL support"
-
-config IDE
+menuconfig IDE
tristate "ATA/ATAPI/MFM/RLL support"
---help---
@@ -1053,4 +1051,2 @@ config BLK_DEV_HD
endif
-
-endmenu
--- a/drivers/mmc/Kconfig 2005-06-19 14:16:46.000000000 +0200
+++ b/drivers/mmc/Kconfig 2005-06-29 13:41:02.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "MMC/SD Card support"
-
-config MMC
- tristate "MMC support"
+menuconfig MMC
+ tristate "MMC/SD Card support"
help
MMC is the "multi-media card" bus protocol.
@@ -60,4 +58,2 @@ config MMC_WBSD
If unsure, say N.
-
-endmenu
--- a/drivers/net/wan/Kconfig 2005-06-19 14:16:52.000000000 +0200
+++ b/drivers/net/wan/Kconfig 2005-06-29 13:49:27.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Wan interfaces"
- depends on NETDEVICES
-
-config WAN
+menuconfig WAN
bool "Wan interfaces support"
+ depends on NETDEVICES
---help---
Wide Area Networks (WANs), such as X.25, Frame Relay and leased
@@ -603,5 +601,2 @@ config SBNI_MULTILINE
If unsure, say N.
-
-endmenu
-
--- a/drivers/net/irda/Kconfig 2005-06-19 14:16:48.000000000 +0200
+++ b/drivers/net/irda/Kconfig 2005-06-30 10:13:49.000000000 +0200
@@ -1,6 +1,9 @@
-menu "Infrared-port device drivers"
+menuconfig IRDA_DEVICES
+ bool "Infrared-port device drivers"
depends on IRDA!=n
+if IRDA_DEVICES
+
comment "SIR device drivers"
@@ -401,4 +404,3 @@ config VIA_FIR
via-ircc.
-endmenu
-
+endif
--- a/drivers/net/tulip/Kconfig 2005-05-02 02:24:03.000000000 +0200
+++ b/drivers/net/tulip/Kconfig 2005-06-29 14:09:18.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Tulip family network device support"
- depends on NET_ETHERNET && (PCI || EISA || CARDBUS)
-
-config NET_TULIP
+menuconfig NET_TULIP
bool "\"Tulip\" family network device support"
+ depends on NET_ETHERNET && (PCI || EISA || CARDBUS)
help
This selects the "Tulip" family of EISA/PCI network cards.
@@ -162,5 +160,2 @@ config PCMCIA_XIRTULIP
<file:Documentation/networking/net-modules.txt>. The module will
be called xircom_tulip_cb. If unsure, say N.
-
-endmenu
-
--- a/drivers/net/Kconfig 2005-06-19 14:16:46.000000000 +0200
+++ b/drivers/net/Kconfig 2005-06-30 09:07:31.000000000 +0200
@@ -136,8 +136,6 @@ endif
#
-menu "Ethernet (10 or 100Mbit)"
+menuconfig NET_ETHERNET
depends on NETDEVICES && !UML
-
-config NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
---help---
@@ -165,4 +163,6 @@ config NET_ETHERNET
the questions about Ethernet network cards. If unsure, say N.
+if NET_ETHERNET
+
config MII
tristate "Generic Media Independent Interface device support"
@@ -1763,5 +1763,5 @@ config NE_H8300
source "drivers/net/fec_8xx/Kconfig"
-endmenu
+endif
#
@@ -1769,7 +1769,10 @@ endmenu
#
-menu "Ethernet (1000 Mbit)"
+menuconfig NET_ETHERNET1000
+ bool "Ethernet (1 Gbit)"
depends on NETDEVICES && !UML
+if NET_ETHERNET1000
+
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
@@ -2082,5 +2085,5 @@ config MV643XX_ETH_2
Ethernet.
-endmenu
+endif
#
@@ -2088,7 +2091,10 @@ endmenu
#
-menu "Ethernet (10000 Mbit)"
+menuconfig NET_ETHERNET10_000
+ bool "Ethernet (10 Gbit)"
depends on NETDEVICES && !UML
+if NET_ETHERNET10_000
+
config IXGB
tristate "Intel(R) PRO/10GbE support"
@@ -2166,5 +2172,5 @@ config 2BUFF_MODE
If not sure please say N.
-endmenu
+endif
if !UML
--- a/drivers/net/arcnet/Kconfig 2005-05-02 02:25:46.000000000 +0200
+++ b/drivers/net/arcnet/Kconfig 2005-06-29 13:48:05.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "ARCnet devices"
+menuconfig ARCNET
+ tristate "ARCnet device support"
depends on NETDEVICES && (ISA || PCI)
-
-config ARCNET
- tristate "ARCnet support"
---help---
If you have a network card of this type, say Y and check out the
@@ -136,5 +134,2 @@ config ARCNET_COM20020_PCI
tristate "Support for COM20020 on PCI"
depends on ARCNET_COM20020 && PCI
-
-endmenu
-
--- a/drivers/net/tokenring/Kconfig 2005-05-02 02:25:48.000000000 +0200
+++ b/drivers/net/tokenring/Kconfig 2005-06-29 14:13:55.000000000 +0200
@@ -3,10 +3,8 @@
#
-menu "Token Ring devices"
+menuconfig TR
depends on NETDEVICES
-
-# So far, we only have PCI, ISA, and MCA token ring devices
-config TR
bool "Token Ring driver support"
+# So far, we only have PCI, ISA, and MCA token ring devices
depends on (PCI || ISA || MCA || CCW)
select LLC
@@ -182,5 +180,2 @@ config SMCTR
To compile this driver as a module, choose M here: the module will be
called smctr.
-
-endmenu
-
--- a/drivers/net/pcmcia/Kconfig 2005-05-02 02:25:47.000000000 +0200
+++ b/drivers/net/pcmcia/Kconfig 2005-06-29 14:21:56.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "PCMCIA network device support"
- depends on NETDEVICES && PCMCIA!=n
-
-config NET_PCMCIA
+menuconfig NET_PCMCIA
bool "PCMCIA network device support"
+ depends on NETDEVICES && PCMCIA!=n
---help---
Say Y if you would like to include support for any PCMCIA or CardBus
@@ -128,5 +126,2 @@ config PCMCIA_IBMTR
To compile this driver as a module, choose M here: the module will be
called ibmtr_cs.
-
-endmenu
-
--- a/drivers/net/wireless/Kconfig 2005-06-19 14:16:52.000000000 +0200
+++ b/drivers/net/wireless/Kconfig 2005-06-29 14:25:06.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Wireless LAN (non-hamradio)"
- depends on NETDEVICES
-
-config NET_RADIO
+menuconfig NET_RADIO
bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
+ depends on NETDEVICES
---help---
Support for wireless LANs and everything having to do with radio,
@@ -361,5 +359,2 @@ config NET_WIRELESS
depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
default y
-
-endmenu
-
--- a/drivers/mtd/nand/Kconfig 2005-05-02 02:25:46.000000000 +0200
+++ b/drivers/mtd/nand/Kconfig 2005-06-29 14:45:32.000000000 +0200
@@ -2,9 +2,10 @@
# $Id: Kconfig,v 1.26 2005/01/05 12:42:24 dwmw2 Exp $
-menu "NAND Flash Device Drivers"
- depends on MTD!=n
+config MTD_NAND_IDS
+ depends on MTD
+ tristate
-config MTD_NAND
- tristate "NAND Device Support"
+menuconfig MTD_NAND
+ tristate "NAND Flash Device Support"
depends on MTD
select MTD_NAND_IDS
@@ -56,7 +57,4 @@ config MTD_NAND_TOTO
Support for NAND flash on Texas Instruments Toto platform.
-config MTD_NAND_IDS
- tristate
-
config MTD_NAND_TX4925NDFMC
tristate "SmartMedia Card on Toshiba RBTX4925 reference board"
@@ -204,4 +202,2 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
The simulator may simulate verious NAND flash chips for the
MTD nand layer.
-
-endmenu
--- a/drivers/mtd/Kconfig 2005-06-19 14:16:46.000000000 +0200
+++ b/drivers/mtd/Kconfig 2005-06-29 14:30:26.000000000 +0200
@@ -1,7 +1,5 @@
# $Id: Kconfig,v 1.7 2004/11/22 11:33:56 ijc Exp $
-menu "Memory Technology Devices (MTD)"
-
-config MTD
+menuconfig MTD
tristate "Memory Technology Device (MTD) support"
help
@@ -261,5 +259,2 @@ source "drivers/mtd/devices/Kconfig"
source "drivers/mtd/nand/Kconfig"
-
-endmenu
-
--- a/drivers/pci/hotplug/Kconfig 2005-05-02 02:25:49.000000000 +0200
+++ b/drivers/pci/hotplug/Kconfig 2005-06-29 14:49:25.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "PCI Hotplug Support"
-
-config HOTPLUG_PCI
+menuconfig HOTPLUG_PCI
tristate "Support for PCI Hotplug (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
@@ -193,5 +191,2 @@ config HOTPLUG_PCI_SGI
When in doubt, say N.
-
-endmenu
-
--- a/drivers/pnp/Kconfig 2005-05-02 02:24:56.000000000 +0200
+++ b/drivers/pnp/Kconfig 2005-06-29 14:51:49.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "Plug and Play support"
-
-config PNP
+menuconfig PNP
bool "Plug and Play support"
depends on ISA || ACPI_BUS
@@ -37,5 +35,2 @@ source "drivers/pnp/pnpbios/Kconfig"
source "drivers/pnp/pnpacpi/Kconfig"
-
-endmenu
-
--- a/drivers/usb/serial/Kconfig 2005-06-19 14:17:06.000000000 +0200
+++ b/drivers/usb/serial/Kconfig 2005-06-29 15:05:18.000000000 +0200
@@ -3,8 +3,5 @@
#
-menu "USB Serial Converter support"
- depends on USB!=n
-
-config USB_SERIAL
+menuconfig USB_SERIAL
tristate "USB Serial Converter support"
depends on USB
@@ -481,4 +478,2 @@ config USB_EZUSB
default y
-endmenu
-
--- a/drivers/acpi/Kconfig 2005-06-19 14:16:26.000000000 +0200
+++ b/drivers/acpi/Kconfig 2005-06-29 15:08:06.000000000 +0200
@@ -3,13 +3,10 @@
#
-menu "ACPI (Advanced Configuration and Power Interface) Support"
+menuconfig ACPI
+ bool "ACPI (Advanced Configuration and Power Interface) Support"
depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86
-config ACPI
- bool "ACPI Support"
- depends on IA64 || X86
-
default y
---help---
@@ -352,4 +349,2 @@ config ACPI_HOTPLUG_MEMORY
$>modprobe acpi_memhotplug
endif # ACPI
-
-endmenu
--- a/drivers/char/tpm/Kconfig 2005-06-19 14:16:33.000000000 +0200
+++ b/drivers/char/tpm/Kconfig 2005-06-29 15:10:22.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "TPM devices"
-
-config TCG_TPM
+menuconfig TCG_TPM
tristate "TPM Hardware Support"
depends on EXPERIMENTAL && PCI
@@ -35,5 +33,2 @@ config TCG_ATMEL
will be accessible from within Linux. To compile this driver
as a module, choose M here; the module will be called tpm_atmel.
-
-endmenu
-
--- a/drivers/char/ipmi/Kconfig 2005-05-02 02:25:43.000000000 +0200
+++ b/drivers/char/ipmi/Kconfig 2005-06-29 15:11:42.000000000 +0200
@@ -3,6 +3,5 @@
#
-menu "IPMI"
-config IPMI_HANDLER
+menuconfig IPMI_HANDLER
tristate 'IPMI top-level message handler'
help
@@ -64,4 +63,2 @@ config IPMI_POWEROFF
This enables a function to power off the system with IPMI if
the IPMI management controller is capable of this.
-
-endmenu
--- a/drivers/char/watchdog/Kconfig 2005-06-19 14:16:33.000000000 +0200
+++ b/drivers/char/watchdog/Kconfig 2005-06-29 15:14:36.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "Watchdog Cards"
-
-config WATCHDOG
+menuconfig WATCHDOG
bool "Watchdog Timer Support"
---help---
@@ -546,4 +544,2 @@ config USBPCWATCHDOG
Most people will say N.
-
-endmenu
--- a/drivers/isdn/hisax/Kconfig 2005-06-19 14:16:40.000000000 +0200
+++ b/drivers/isdn/hisax/Kconfig 2005-06-29 15:24:55.000000000 +0200
@@ -1,8 +1,6 @@
-menu "Passive cards"
+menuconfig ISDN_DRV_HISAX
+ tristate "Passive cards (HiSax, HFC)"
depends on ISDN_I4L
-
-config ISDN_DRV_HISAX
- tristate "HiSax SiemensChipSet driver support"
select CRC_CCITT
---help---
@@ -438,5 +436,2 @@ config HISAX_AVM_A1_PCMCIA
endif
-
-endmenu
-
--- a/drivers/isdn/Kconfig 2004-08-14 07:38:04.000000000 +0200
+++ b/drivers/isdn/Kconfig 2005-06-29 15:26:04.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "ISDN subsystem"
-
-config ISDN
- tristate "ISDN support"
+menuconfig ISDN
+ tristate "ISDN subsystem"
depends on NET
---help---
@@ -63,5 +61,2 @@ source "drivers/isdn/capi/Kconfig"
source "drivers/isdn/hardware/Kconfig"
-
-endmenu
-
--- a/drivers/isdn/hardware/avm/Kconfig 2005-05-02 02:24:52.000000000 +0200
+++ b/drivers/isdn/hardware/avm/Kconfig 2005-06-29 15:29:00.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Active AVM cards"
+menuconfig CAPI_AVM
+ bool "Active AVM cards"
depends on NET && ISDN && ISDN_CAPI!=n
-
-config CAPI_AVM
- bool "Support AVM cards"
help
Enable support for AVM active ISDN cards.
@@ -62,5 +60,2 @@ config ISDN_DRV_AVMB1_C4
Enable support for the AVM C4/C2 PCI cards.
These cards handle 4/2 BRI ISDN lines (8/4 channels).
-
-endmenu
-
--- a/drivers/isdn/hardware/eicon/Kconfig 2004-08-14 07:36:59.000000000
+0200
+++ b/drivers/isdn/hardware/eicon/Kconfig 2005-06-29 15:29:27.000000000
+0200
@@ -3,9 +3,7 @@
#
-menu "Active Eicon DIVA Server cards"
- depends on NET && ISDN && ISDN_CAPI!=n
-
-config CAPI_EICON
+menuconfig CAPI_EICON
bool "Support Eicon cards"
+ depends on NET && ISDN && ISDN_CAPI!=n
help
Enable support for Eicon Networks active ISDN cards.
@@ -49,5 +47,2 @@ config ISDN_DIVAS_MAINT
help
Enable Divas Maintainance driver.
-
-endmenu
-
--- a/drivers/scsi/Kconfig 2005-06-19 14:16:58.000000000 +0200
+++ b/drivers/scsi/Kconfig 2005-06-29 15:30:59.000000000 +0200
@@ -1,5 +1,3 @@
-menu "SCSI device support"
-
-config SCSI
+menuconfig SCSI
tristate "SCSI device support"
---help---
@@ -1797,4 +1795,2 @@ endmenu
source "drivers/scsi/pcmcia/Kconfig"
-
-endmenu
--- a/drivers/scsi/pcmcia/Kconfig 2004-08-14 07:37:25.000000000 +0200
+++ b/drivers/scsi/pcmcia/Kconfig 2005-06-29 15:33:03.000000000 +0200
@@ -3,7 +3,10 @@
#
-menu "PCMCIA SCSI adapter support"
+menuconfig SCSI_PCMCIA
+ bool "PCMCIA SCSI adapter support"
depends on SCSI!=n && PCMCIA!=n && MODULES
+if SCSI_PCMCIA
+
config PCMCIA_AHA152X
tristate "Adaptec AHA152X PCMCIA support"
@@ -80,3 +83,3 @@ config PCMCIA_SYM53C500
module will be called sym53c500_cs.
-endmenu
+endif
--- a/drivers/infiniband/Kconfig 2005-05-02 02:25:44.000000000 +0200
+++ b/drivers/infiniband/Kconfig 2005-06-29 15:35:18.000000000 +0200
@@ -1,5 +1,3 @@
-menu "InfiniBand support"
-
-config INFINIBAND
+menuconfig INFINIBAND
tristate "InfiniBand support"
---help---
@@ -11,4 +9,2 @@ source "drivers/infiniband/hw/mthca/Kcon
source "drivers/infiniband/ulp/ipoib/Kconfig"
-
-endmenu
--- a/drivers/cdrom/Kconfig 2005-06-19 14:16:31.000000000 +0200
+++ b/drivers/cdrom/Kconfig 2005-06-29 11:27:02.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Old CD-ROM drivers (not SCSI, not IDE)"
+menuconfig CD_NO_IDESCSI
+ bool "Old CD-ROM drivers (not SCSI, IDE or ATAPI)"
depends on ISA
-
-config CD_NO_IDESCSI
- bool "Support non-SCSI/IDE/ATAPI CDROM drives"
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
@@ -210,4 +208,2 @@ config CDU535
To compile this driver as a module, choose M here: the
module will be called sonycd535.
-
-endmenu
--- a/drivers/media/dvb/Kconfig 2005-06-19 14:16:41.000000000 +0200
+++ b/drivers/media/dvb/Kconfig 2005-06-29 15:50:58.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "Digital Video Broadcasting Devices"
-
-config DVB
- bool "DVB For Linux"
+menuconfig DVB
+ bool "Digital Video Broadcasting Devices"
depends on NET && INET
---help---
@@ -44,4 +42,2 @@ comment "Supported DVB Frontends"
depends on DVB_CORE
source "drivers/media/dvb/frontends/Kconfig"
-
-endmenu
--- a/drivers/video/logo/Kconfig 2005-06-19 14:17:08.000000000 +0200
+++ b/drivers/video/logo/Kconfig 2005-06-29 15:59:13.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "Logo configuration"
-
-config LOGO
- bool "Bootup logo"
+menuconfig LOGO
+ bool "Bootup logo configuration"
depends on FB || SGI_NEWPORT_CONSOLE
@@ -63,5 +61,2 @@ config LOGO_SUPERH_CLUT224
depends on LOGO && SUPERH
default y
-
-endmenu
-
--- a/drivers/message/i2o/Kconfig 2004-08-14 07:36:13.000000000 +0200
+++ b/drivers/message/i2o/Kconfig 2005-06-29 16:05:13.000000000 +0200
@@ -1,6 +1,3 @@
-
-menu "I2O device support"
-
-config I2O
+menuconfig I2O
tristate "I2O support"
depends on PCI
@@ -71,5 +68,2 @@ config I2O_PROC
To compile this support as a module, choose M here: the
module will be called i2o_proc.
-
-endmenu
-
--- a/drivers/message/fusion/Kconfig 2005-05-02 02:24:54.000000000 +0200
+++ b/drivers/message/fusion/Kconfig 2005-06-29 16:07:51.000000000 +0200
@@ -1,7 +1,4 @@
-
-menu "Fusion MPT device support"
-
-config FUSION
- tristate "Fusion MPT (base + ScsiHost) drivers"
+menuconfig FUSION
+ tristate "Fusion MPT support (base + ScsiHost)"
depends on PCI && SCSI
---help---
@@ -63,4 +60,2 @@ config FUSION_LAN
If unsure whether you really want or need this, say N.
-
-endmenu
--- a/drivers/ieee1394/Kconfig 2005-06-19 14:16:37.000000000 +0200
+++ b/drivers/ieee1394/Kconfig 2005-06-29 16:10:10.000000000 +0200
@@ -1,7 +1,5 @@
# -*- shell-script -*-
-menu "IEEE 1394 (FireWire) support"
-
-config IEEE1394
+menuconfig IEEE1394
tristate "IEEE 1394 (FireWire) support"
depends on PCI || BROKEN
@@ -180,4 +178,2 @@ config IEEE1394_AMDTP
To compile this driver as a module, say M here: the
module will be called amdtp.
-
-endmenu
--- a/drivers/pcmcia/Kconfig 2005-06-19 14:16:54.000000000 +0200
+++ b/drivers/pcmcia/Kconfig 2005-06-29 16:12:49.000000000 +0200
@@ -6,7 +6,5 @@
#
-menu "PCCARD (PCMCIA/CardBus) support"
-
-config PCCARD
+menuconfig PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
select HOTPLUG
@@ -200,4 +198,2 @@ config PCCARD_NONSTATIC
endif # PCCARD
-
-endmenu
--- a/drivers/telephony/Kconfig 2004-08-14 07:36:32.000000000 +0200
+++ b/drivers/telephony/Kconfig 2005-06-29 16:31:22.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "Telephony Support"
-
-config PHONE
- tristate "Linux telephony support"
+menuconfig PHONE
+ tristate "Telephony support"
---help---
Say Y here if you have a telephony card, which for example allows
@@ -43,5 +41,2 @@ config PHONE_IXJ_PCMCIA
cards manufactured by Quicknet Technologies, Inc. This changes the
card initialization code to work with the card manager daemon.
-
-endmenu
-
--- a/drivers/parport/Kconfig 2005-06-19 14:16:53.000000000 +0200
+++ b/drivers/parport/Kconfig 2005-06-29 16:33:53.000000000 +0200
@@ -6,7 +6,5 @@
#
-menu "Parallel port support"
-
-config PARPORT
+menuconfig PARPORT
tristate "Parallel port support"
---help---
@@ -84,4 +82,5 @@ config PARPORT_PC_PCMCIA
config PARPORT_NOT_PC
+ depends on PARPORT
bool
@@ -141,5 +140,2 @@ config PARPORT_1284
transfer modes. Also say Y if you want device ID information to
appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
-
-endmenu
-
--- a/fs/nls/Kconfig 2004-08-14 07:36:10.000000000 +0200
+++ b/fs/nls/Kconfig 2005-06-30 08:37:19.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "Native Language Support"
-
-config NLS
- tristate "Base native language support"
+menuconfig NLS
+ tristate "Native language support"
---help---
The base Native Language Support. A number of filesystems
@@ -501,4 +499,2 @@ config NLS_UTF8
the Unicode/ISO9646 universal character set.
-endmenu
-
--- a/fs/xfs/Kconfig 2005-05-02 02:25:53.000000000 +0200
+++ b/fs/xfs/Kconfig 2005-06-30 08:41:21.000000000 +0200
@@ -1,6 +1,4 @@
-menu "XFS support"
-
-config XFS_FS
- tristate "XFS filesystem support"
+menuconfig XFS_FS
+ tristate "XFS support"
select EXPORTFS if NFSD!=n
help
@@ -21,11 +19,13 @@ config XFS_FS
to use an initial ramdisk (initrd) to boot.
+if XFS_FS
+
config XFS_EXPORT
bool
- default y if XFS_FS && EXPORTFS
+ default y if EXPORTFS
config XFS_RT
bool "Realtime support (EXPERIMENTAL)"
- depends on XFS_FS && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say Y here you will be able to mount and use XFS filesystems
@@ -44,5 +44,4 @@ config XFS_RT
config XFS_QUOTA
bool "Quota support"
- depends on XFS_FS
help
If you say Y here, you will be able to set limits for disk usage on
@@ -61,5 +60,4 @@ config XFS_QUOTA
config XFS_SECURITY
bool "Security Label support"
- depends on XFS_FS
help
Security labels support alternative access control models
@@ -73,5 +71,4 @@ config XFS_SECURITY
config XFS_POSIX_ACL
bool "POSIX ACL support"
- depends on XFS_FS
help
POSIX Access Control Lists (ACLs) support permissions for users and
@@ -83,3 +80,3 @@ config XFS_POSIX_ACL
If you don't know what Access Control Lists are, say N.
-endmenu
+endif
--- a/fs/Kconfig 2005-06-19 14:17:10.000000000 +0200
+++ b/fs/Kconfig 2005-06-30 09:40:19.000000000 +0200
@@ -1718,10 +1718,6 @@ config RXRPC
endmenu
-menu "Partition Types"
-
source "fs/partitions/Kconfig"
-endmenu
-
source "fs/nls/Kconfig"
--- a/init/Kconfig 2005-06-19 14:17:44.000000000 +0200
+++ b/init/Kconfig 2005-06-30 09:17:08.000000000 +0200
@@ -391,8 +391,6 @@ config BASE_SMALL
default 1 if !BASE_FULL
-menu "Loadable module support"
-
-config MODULES
- bool "Enable loadable module support"
+menuconfig MODULES
+ bool "Loadable module support"
help
Kernel modules are small pieces of compiled code which can
@@ -413,7 +411,8 @@ config MODULES
If unsure, say Y.
+if MODULES
+
config MODULE_UNLOAD
bool "Module unloading"
- depends on MODULES
help
Without this option you will not be able to unload any
@@ -435,5 +434,4 @@ config OBSOLETE_MODPARM
bool
default y
- depends on MODULES
help
You need this option to use module parameters on modules which
@@ -443,5 +441,5 @@ config OBSOLETE_MODPARM
config MODVERSIONS
bool "Module versioning support (EXPERIMENTAL)"
- depends on MODULES && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
Usually, you have to use modules compiled with your kernel.
@@ -454,5 +452,4 @@ config MODVERSIONS
config MODULE_SRCVERSION_ALL
bool "Source checksum for all modules"
- depends on MODULES
help
Modules which contain a MODULE_VERSION get an extra "srcversion"
@@ -466,5 +463,4 @@ config MODULE_SRCVERSION_ALL
config KMOD
bool "Automatic kernel module loading"
- depends on MODULES
help
Normally when you have selected some parts of the kernel to
@@ -482,3 +478,4 @@ config STOP_MACHINE
help
Need stop_machine() primitive.
-endmenu
+
+endif
--- a/sound/Kconfig 2005-05-02 02:26:19.000000000 +0200
+++ b/sound/Kconfig 2005-06-29 16:50:57.000000000 +0200
@@ -2,7 +2,5 @@
#
-menu "Sound"
-
-config SOUND
+menuconfig SOUND
tristate "Sound card support"
help
@@ -33,12 +31,11 @@ config SOUND
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+if SOUND
+
source "sound/oss/dmasound/Kconfig"
if !M68K
-menu "Advanced Linux Sound Architecture"
- depends on SOUND!=n
-
-config SND
+menuconfig SND
tristate "Advanced Linux Sound Architecture"
depends on SOUND
@@ -70,12 +67,7 @@ source "sound/sparc/Kconfig"
source "sound/parisc/Kconfig"
-endmenu
-
-menu "Open Sound System"
- depends on SOUND!=n && (BROKEN || (!SPARC32 && !SPARC64))
-
-config SOUND_PRIME
+menuconfig SOUND_PRIME
tristate "Open Sound System (DEPRECATED)"
- depends on SOUND
+ depends on SOUND && (BROKEN || (!SPARC32 && !SPARC64))
help
Say 'Y' or 'M' to enable Open Sound System drivers.
@@ -83,7 +75,5 @@ config SOUND_PRIME
source "sound/oss/Kconfig"
-endmenu
-
endif
-endmenu
+endif
--- x/fs/partitions/Kconfig 2005-07-04 13:50:38.000000000 +0200
+++ b/fs/partitions/Kconfig 2005-06-30 09:39:18.000000000 +0200
@@ -1,7 +1,7 @@
#
# Partition configuration
#
-config PARTITION_ADVANCED
+menuconfig PARTITION_ADVANCED
bool "Advanced partition selection"
help
Say Y here if you would like to use hard disks under Linux which
--- x/sound/oss/Kconfig 2005-07-04 13:50:55.000000000 +0200
+++ b/sound/oss/Kconfig 2005-06-29 16:49:05.000000000 +0200
@@ -1084,7 +1084,7 @@ config SOUND_TVMIXER
config SOUND_KAHLUA
tristate "XpressAudio Sound Blaster emulation"
- depends on SOUND_SB
+ depends on SOUND_SB && SOUND_PRIME
config SOUND_ALI5455
tristate "ALi5455 audio support"
--- x/sound/oss/dmasound/Kconfig 2005-07-04 13:47:08.000000000 +0200
+++ b/sound/oss/dmasound/Kconfig 2005-06-29 16:45:48.000000000 +0200
@@ -56,3 +56,4 @@ config DMASOUND_Q40
config DMASOUND
tristate
+ depends on SOUND
--
The perfect officer for the job will transfer in the day after that billet
is filled by someone else.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
