RTL8168F rev.B does not have to set following two ephy parameters.
{ 0x06, 0x00c0, 0x0020 }
{ 0x08, 0x0001, 0x0002 }
Add function rtl_hw_start_8168f_2 to set RTL8168F rev.B ephy parameters,
instead of using function rtl_hw_start_8168f_1.
Signed-off-by: Chunhao Lin <h...@realtek.com>
---
drivers/net/ethernet/realtek/r8169.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c
b/drivers/net/ethernet/realtek/r8169.c
index aa12833..0c870f5 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5867,6 +5867,26 @@ static void rtl_hw_start_8168f_1(struct rtl8169_private
*tp)
RTL_W8(EEE_LED, RTL_R8(EEE_LED) & ~0x07);
}
+static void rtl_hw_start_8168f_2(struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ static const struct ephy_info e_info_8168f_2[] = {
+ { 0x09, 0x0000, 0x0080 },
+ { 0x19, 0x0000, 0x0224 },
+ { 0x00, 0x0000, 0x0008 },
+ { 0x0c, 0x3df0, 0x0200 }
+ };
+
+ rtl_hw_start_8168f(tp);
+
+ rtl_ephy_init(tp, e_info_8168f_2, ARRAY_SIZE(e_info_8168f_2));
+
+ rtl_w0w1_eri(tp, 0x0d4, ERIAR_MASK_0011, 0x0c00, 0xff00, ERIAR_EXGMAC);
+
+ /* Adjust EEE LED frequency */
+ RTL_W8(EEE_LED, RTL_R8(EEE_LED) & ~0x07);
+}
+
static void rtl_hw_start_8411(struct rtl8169_private *tp)
{
static const struct ephy_info e_info_8411[] = {
@@ -6276,9 +6296,11 @@ static void rtl_hw_start_8168(struct net_device *dev)
break;
case RTL_GIGA_MAC_VER_35:
- case RTL_GIGA_MAC_VER_36:
rtl_hw_start_8168f_1(tp);
break;
+ case RTL_GIGA_MAC_VER_36:
+ rtl_hw_start_8168f_2(tp);
+ break;
case RTL_GIGA_MAC_VER_38:
rtl_hw_start_8411(tp);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
