The pwm_enable function didn't clear the enabled bit if a call to a
clients enable function returned an error. The result was that the state
of the pwm core was wrong. Clearing the bit when enable returns an error
ensures the state is properly set.
Signed-off-by: Jonathan Richardson <jonat...@broadcom.com>
---
drivers/pwm/core.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 966497d..641f6ec 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -457,8 +457,14 @@ EXPORT_SYMBOL_GPL(pwm_set_polarity);
*/
int pwm_enable(struct pwm_device *pwm)
{
- if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags))
- return pwm->chip->ops->enable(pwm->chip, pwm);
+ int err;
+
+ if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags)) {
+ err = pwm->chip->ops->enable(pwm->chip, pwm);
+ if (err)
+ clear_bit(PWMF_ENABLED, &pwm->flags);
+ return err;
+ }
return pwm ? 0 : -EINVAL;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
