Use generic config_init callback also for KSZ8021 and KSZ8031.
This has been avoided this far due to commit b838b4aced99 ("phy/micrel:
KSZ8031RNL RMII clock reconfiguration bug"), which claims that the PHY
becomes unresponsive if the broadcast-disable flag is set before
configuring the clock mode.
Turns out that the problem seemingly worked-around by the above
mentioned commit was really due to a hardware-configuration issue, where
the PHY was in fact strapped to address 3 rather than 0.
Tested-by: Bruno Thomsen <b...@kamstrup.dk>
Signed-off-by: Johan Hovold <jo...@kernel.org>
---
drivers/net/phy/micrel.c | 18 +++---------------
1 file changed, 3 insertions(+), 15 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index c530de1e63f5..3ad8ca76196d 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -88,6 +88,7 @@ struct kszphy_priv {
static const struct kszphy_type ksz8021_type = {
.led_mode_reg = MII_KSZPHY_CTRL_2,
+ .has_broadcast_disable = true,
.has_rmii_ref_clk_sel = true,
};
@@ -258,19 +259,6 @@ static int kszphy_config_init(struct phy_device *phydev)
return 0;
}
-static int ksz8021_config_init(struct phy_device *phydev)
-{
- int rc;
-
- rc = kszphy_config_init(phydev);
- if (rc)
- return rc;
-
- rc = kszphy_broadcast_disable(phydev);
-
- return rc < 0 ? rc : 0;
-}
-
static int ksz9021_load_values_from_of(struct phy_device *phydev,
struct device_node *of_node, u16 reg,
char *field1, char *field2,
@@ -584,7 +572,7 @@ static struct phy_driver ksphy_driver[] = {
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.driver_data = &ksz8021_type,
.probe = kszphy_probe,
- .config_init = ksz8021_config_init,
+ .config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
@@ -601,7 +589,7 @@ static struct phy_driver ksphy_driver[] = {
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.driver_data = &ksz8021_type,
.probe = kszphy_probe,
- .config_init = ksz8021_config_init,
+ .config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
--
2.0.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
