It seems like early_printk can be configured into
a few architectures but also appear not to be used.
$ git grep -w "early_printk"
arch/arm/kernel/Makefile:obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arch/arm/kernel/early_printk.c: * linux/arch/arm/kernel/early_printk.c
arch/arm/mach-socfpga/socfpga.c: early_printk("Early printk
initialized\n");
arch/blackfin/kernel/Makefile:obj-$(CONFIG_EARLY_PRINTK) +=
early_printk.o
arch/blackfin/kernel/bfin_dma.c:#include <asm/early_printk.h>
arch/blackfin/kernel/early_printk.c: * derived from
arch/x86/kernel/early_printk.c
arch/blackfin/kernel/early_printk.c:#include <asm/early_printk.h>
arch/blackfin/kernel/setup.c:#include <asm/early_printk.h>
arch/blackfin/kernel/shadow_console.c:#include <asm/early_printk.h>
arch/blackfin/mm/init.c:#include <asm/early_printk.h>
arch/ia64/sn/kernel/setup.c: * IO on SN2 is done via SAL calls,
early_printk won't work without this.
arch/m68k/kernel/Makefile:obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arch/microblaze/kernel/Makefile:obj-$(CONFIG_EARLY_PRINTK) +=
early_printk.o
arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c: early_printk("ERROR: Microblaze
" x "-different for PVR and DTS\n");
arch/microblaze/kernel/cpu/cpuinfo-static.c: early_printk("ERROR: Microblaze
" x "-different for kernel and DTS\n");
arch/microblaze/kernel/setup.c:/* initialize device tree for usage in
early_printk */
arch/mips/ath25/Makefile:obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arch/mips/ath79/Makefile:obj-$(CONFIG_EARLY_PRINTK) +=
early_printk.o
arch/mips/bcm63xx/Makefile:obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h: * during early_printk no
ioremap possible at this early stage
arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h: * during early_printk no
ioremap is possible
arch/mips/kernel/Makefile:obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arch/mips/lantiq/Makefile:obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arch/mips/loongson/common/Makefile:obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arch/mips/ralink/Makefile:obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arch/tile/kernel/Makefile:obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arch/tile/kernel/early_printk.c: early_printk("Kernel panic - not
syncing: %pV", &vaf);
arch/um/kernel/Makefile:obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arch/unicore32/kernel/Makefile:obj-$(CONFIG_EARLY_PRINTK) +=
early_printk.o
arch/unicore32/kernel/early_printk.c: *
linux/arch/unicore32/kernel/early_printk.c
arch/x86/kernel/Makefile:obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arch/x86/kernel/e820.c: early_printk(msg);
arch/x86/kernel/head64.c: early_printk("Kernel alive\n");
arch/x86/kernel/head_64.S: call early_printk
arch/x86/platform/efi/Makefile:obj-$(CONFIG_EARLY_PRINTK_EFI) +=
early_printk.o
drivers/tty/serial/8250/8250_early.c: * and on early_printk.c by Andi Kleen.
drivers/tty/serial/sn_console.c: * synchronous (raw) and asynchronous
(buffered). initially, early_printk
drivers/tty/serial/sn_console.c: /* without early_printk, we may be
invoked late enough to race
drivers/tty/serial/sn_console.c: /* early_printk invocation may have
done this for us */
include/linux/printk.h:void early_printk(const char *fmt, ...);
include/linux/printk.h:void early_printk(const char *s, ...) { }
kernel/events/core.c: early_printk("perf interrupt took too long
(%lld > %lld), lowering "
kernel/locking/lockdep.c: * We cannot printk in early bootup code. Not even
early_printk()
kernel/printk/printk.c:asmlinkage __visible void early_printk(const char *fmt,
...)
kernel/printk/printk.c: * early_printk) - sometimes before setup_arch()
completes - be careful
kernel/printk/printk.c: * There are two types of consoles - bootconsoles
(early_printk) and
These seem to the only uses:
arch/arm/mach-socfpga/socfpga.c: early_printk("Early printk
initialized\n");
[]
arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c: early_printk("ERROR: Microblaze
" x "-different for PVR and DTS\n");
arch/microblaze/kernel/cpu/cpuinfo-static.c: early_printk("ERROR: Microblaze
" x "-different for kernel and DTS\n");
[]
arch/tile/kernel/early_printk.c: early_printk("Kernel panic - not
syncing: %pV", &vaf);
[]
arch/x86/kernel/e820.c: early_printk(msg);
arch/x86/kernel/head64.c: early_printk("Kernel alive\n");
arch/x86/kernel/head_64.S: call early_printk
[]
kernel/events/core.c: early_printk("perf interrupt took too long
(%lld > %lld), lowering "
So blackfin, m68k, and mips seems to have it possible to enable,
but also don't appear at first glance to use it,
Is early_printk really used by these architectures?
Should it be removed?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
