Fix IBM EMAC driver ioctl bug.
I found IBM EMAC driver bug.
So mii-tool command print wrong status.
# mii-tool
eth0: 10 Mbit, half duplex, no link
eth1: 10 Mbit, half duplex, no link
I can get correct status on fixed kernel.
# mii-tool
eth0: negotiated 100baseTx-FD, link okZZ
eth1: negotiated 100baseTx-FD, link ok
Hiroaki Fuse
Signed-off-by: Geoff Levand <[EMAIL PROTECTED]> for CELF
---
Index: linux-2.6.11/drivers/net/ibm_emac/ibm_emac_core.c
===================================================================
--- linux-2.6.11.orig/drivers/net/ibm_emac/ibm_emac_core.c 2005-04-14
10:54:20.014023550 -0700
+++ linux-2.6.11/drivers/net/ibm_emac/ibm_emac_core.c 2005-04-14
10:55:24.723458722 -0700
@@ -1587,7 +1587,7 @@
static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct ocp_enet_private *fep = dev->priv;
- uint *data = (uint *) & rq->ifr_ifru;
+ uint16_t *data = (uint16_t *) & rq->ifr_ifru;
switch (cmd) {
case SIOCGMIIPHY:
-EOF
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
