On Fri, Nov 28, 2014 at 04:08:34PM +0100, Arnd Bergmann wrote: > On Tuesday 25 November 2014, Pawel Moll wrote: > > Now, with the CLCD DT support available, there is no > > more reason to keep the non-DT support for V2P-CA9. > > > > Removed, together with "some" supporting code. It was > > necessary to make PLAT_VERSATILE_SCHED_CLOCK optional > > and selected by the machines still interested in it. > > > > Acked-by: Mike Turquette <mturque...@linaro.org> > > Signed-off-by: Pawel Moll <pawel.m...@arm.com> > > --- > > Changes since v1: > > > > - Removed MFD and power/reset changes from the patch; > > will be posted separately after this is merged. > > Applied to next/cleanup, thanks!
Shame it doesn't work in DT mode though. Compare these boot logs: http://www.arm.linux.org.uk/developer/build/result.php?type=boot&idx=3068 with: http://www.arm.linux.org.uk/developer/build/result.php?type=boot&idx=3071 and spot the difference. The biggest problem is the nonfunctional MMC interface: mmci-pl18x 10005000.mmci: no support for card's volts mmc0: error -22 whilst initialising SD card which, as the rootfs is on the SD card, is pretty fatal. -- FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
