2014-11-26 4:05 GMT+01:00 Guenter Roeck <li...@roeck-us.net>: > On 11/25/2014 10:30 AM, Guenter Roeck wrote: >> Repeating my earlier question: Is the resistor value changed by software >> or by changing the probe ? >> > > Looking into the available documents, I am quite sure that the resistor > is changed by replacing the probe, in other words by pulling the board > with the ina226 and replacing it with another one. Given that, configuring > the shunt resistor value with a sysfs attribute is really the wrong way > to do it; you should use probe specific devicetree overlays instead.
Yes, it's changed by replacing the probes. As for the averaging rate: it's a programmable feature of the chip and it's useful for our user interface for noise reduction (or the opposite - to be able to see the actual distortion), can this be accepted after applying the fixes according to your review? Bart -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
