Currently the regulator core disables the regulators which are unused
or whose reference count is zero or if they are configured always_on.
This change adds a check in this logic to see if a regulator is
configured as boot_on and does not disable it if found true.
Signed-off-by: Pramod Gurav <pramod.gu...@smartplayin.com>
---
The issue was found on apq8064 based IFC6410 on which a fixed regulator
configured as regulator-boot-on in DT and was being disabled when not in
use. Tested this change on this board and found working.
drivers/regulator/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index cd87c0c..9f7a13f 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4019,7 +4019,7 @@ static int __init regulator_init_complete(void)
ops = rdev->desc->ops;
c = rdev->constraints;
- if (c && c->always_on)
+ if (c && (c->always_on || c->boot_on))
continue;
if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
