On 10/11/14 12:45, Daniel Baluta wrote:
> This channel will be used for exposing information about
> activity composite sensors. Activities supported so far:
> * running
> * jogging
> * walking
> * still
>
> THRESHOLD event is used to signal a change in the activity
> state.
>
> We associate a confidence interval for each activity expressed
> as a percentage from 0 to 100.
> * 0, means the sensor IS NOT reporting that activity.
> * 100, means the sensor IS reporting that activity.
>
> Users of this interface have two possible means to gather
> information about the ongoing activities.
>
> 1. Event based, via event file descriptor
> * sensor may report an event when ENTERING an activity or LEAVING
> an activity based on a threshold value.
> * drivers will wake up applications waiting data on the event fd
>
> 2. Polling, by reading the sysfs associated attribute files:
> * /sys/bus/iio/devices/iio:device0/in_activity_running_input
> expressed as percentage confidence value from 0 to 100.
>
> This will offer an interface for Android significant motion
> composite sensor defined here:
> http://source.android.com/devices/sensors/composite_sensors.html
>
> Activities listed above are supported by Freescale's MMA9553 sensor:
> http://freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf
>
> Signed-off-by: Irina Tirdea <irina.tir...@intel.com>
> Signed-off-by: Daniel Baluta <daniel.bal...@intel.com>
Very happy with this - mind you only time will tell if we have ended up
with a flexible enough interface - particularly as people get better at
distinguishing activities use accelerometry.
(come to think of it I wrote a paper on this once - it was rubbish and got
rejected, so I'd rather not remember it, but that's not the point - I
have some recollection of how hard it is to get terribly accurate!)
Anyhow, applied to the togreg branch of iio.git. testing... autobuilders
etc etc.
> ---
> Documentation/ABI/testing/sysfs-bus-iio | 44
> +++++++++++++++++++++++++++++++++
> drivers/iio/industrialio-core.c | 5 ++++
> include/linux/iio/types.h | 7 +++++-
> 3 files changed, 55 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio
> b/Documentation/ABI/testing/sysfs-bus-iio
> index 117521d..7bf49ad 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -790,6 +790,40 @@ Description:
> met before an event is generated. If direction is not
> specified then this period applies to both directions.
>
> +What: /sys/.../events/in_activity_still_thresh_rising_en
> +What: /sys/.../events/in_activity_still_thresh_falling_en
> +What: /sys/.../events/in_activity_walking_thresh_rising_en
> +What: /sys/.../events/in_activity_walking_thresh_falling_en
> +What: /sys/.../events/in_activity_jogging_thresh_rising_en
> +What: /sys/.../events/in_activity_jogging_thresh_falling_en
> +What: /sys/.../events/in_activity_running_thresh_rising_en
> +What: /sys/.../events/in_activity_running_thresh_falling_en
> +KernelVersion: 3.19
> +Contact: linux-...@vger.kernel.org
> +Description:
> + Enables or disables activitity events. Depending on direction
> + an event is generated when sensor ENTERS or LEAVES a given
> state.
> +
> +What: /sys/.../events/in_activity_still_thresh_rising_value
> +What: /sys/.../events/in_activity_still_thresh_falling_value
> +What: /sys/.../events/in_activity_walking_thresh_rising_value
> +What: /sys/.../events/in_activity_walking_thresh_falling_value
> +What: /sys/.../events/in_activity_jogging_thresh_rising_value
> +What: /sys/.../events/in_activity_jogging_thresh_falling_value
> +What: /sys/.../events/in_activity_running_thresh_rising_value
> +What: /sys/.../events/in_activity_running_thresh_falling_value
> +KernelVersion: 3.19
> +Contact: linux-...@vger.kernel.org
> +Description:
> + Confidence value (in units as percentage) to be used
> + for deciding when an event should be generated. E.g for
> + running: If the confidence value reported by the sensor
> + is greater than in_activity_running_thresh_rising_value
> + then the sensor ENTERS running state. Conversely, if the
> + confidence value reported by the sensor is lower than
> + in_activity_running_thresh_falling_value then the sensor
> + is LEAVING running state.
> +
> What: /sys/.../iio:deviceX/events/in_accel_mag_en
> What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en
> What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en
> @@ -956,6 +990,16 @@ Description:
> and the relevant _type attributes to establish the data storage
> format.
>
> +What: /sys/.../iio:deviceX/in_activity_still_input
> +What: /sys/.../iio:deviceX/in_activity_walking_input
> +What: /sys/.../iio:deviceX/in_activity_jogging_input
> +What: /sys/.../iio:deviceX/in_activity_running_input
> +KernelVersion: 3.19
> +Contact: linux-...@vger.kernel.org
> +Description:
> + This attribute is used to read the confidence for an activity
> + expressed in units as percentage.
> +
> What:
> /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw
> KernelVersion: 2.6.38
> Contact: linux-...@vger.kernel.org
> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
> index af3e76d..e453ef9 100644
> --- a/drivers/iio/industrialio-core.c
> +++ b/drivers/iio/industrialio-core.c
> @@ -70,6 +70,7 @@ static const char * const iio_chan_type_name_spec[] = {
> [IIO_CCT] = "cct",
> [IIO_PRESSURE] = "pressure",
> [IIO_HUMIDITYRELATIVE] = "humidityrelative",
> + [IIO_ACTIVITY] = "activity",
> };
>
> static const char * const iio_modifier_names[] = {
> @@ -91,6 +92,10 @@ static const char * const iio_modifier_names[] = {
> [IIO_MOD_NORTH_TRUE] = "from_north_true",
> [IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp",
> [IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp",
> + [IIO_MOD_RUNNING] = "running",
> + [IIO_MOD_JOGGING] = "jogging",
> + [IIO_MOD_WALKING] = "walking",
> + [IIO_MOD_STILL] = "still",
> };
>
> /* relies on pairs of these shared then separate */
> diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
> index 4a2af8a..b3a241d 100644
> --- a/include/linux/iio/types.h
> +++ b/include/linux/iio/types.h
> @@ -30,6 +30,7 @@ enum iio_chan_type {
> IIO_CCT,
> IIO_PRESSURE,
> IIO_HUMIDITYRELATIVE,
> + IIO_ACTIVITY,
> };
>
> enum iio_modifier {
> @@ -59,7 +60,11 @@ enum iio_modifier {
> IIO_MOD_NORTH_MAGN,
> IIO_MOD_NORTH_TRUE,
> IIO_MOD_NORTH_MAGN_TILT_COMP,
> - IIO_MOD_NORTH_TRUE_TILT_COMP
> + IIO_MOD_NORTH_TRUE_TILT_COMP,
> + IIO_MOD_RUNNING,
> + IIO_MOD_JOGGING,
> + IIO_MOD_WALKING,
> + IIO_MOD_STILL,
> };
>
> enum iio_event_type {
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
