ALVA Nanoface is a USB audio interface device that only works after
receiving an initialization command. This driver does not handle any
actual audio features, but only initializes the device enabling its
audio I/O and physical controls. There are some additional USB audio
features on the device that are currently not supported. The support
for these features may be added later.
Signed-off-by: Lauri Niskanen <a...@ape3000.com>
---
drivers/usb/misc/Kconfig | 9 +++++
drivers/usb/misc/Makefile | 1 +
drivers/usb/misc/nanoface.c | 95 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 105 insertions(+)
create mode 100644 drivers/usb/misc/nanoface.c
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 76d7720..d01d5c0 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -249,6 +249,15 @@ config USB_HSIC_USB3503
help
This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
+config USB_NANOFACE
+ tristate "ALVA Nanoface USB driver"
+ help
+ Say Y here if you need ALVA Nanoface device support. ALVA
+ Nanoface is a USB audio interface device. See
+ <http://www.alva-audio.de/nanoface/> for further information.
+ This driver does not support USB audio features, but enables basic
+ audio I/O connections and physical controls.
+
config USB_LINK_LAYER_TEST
tristate "USB Link Layer Test driver"
help
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 65b0402..2ee5b73 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_USB_USS720) += uss720.o
obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o
obj-$(CONFIG_USB_YUREX) += yurex.o
obj-$(CONFIG_USB_HSIC_USB3503) += usb3503.o
+obj-$(CONFIG_USB_NANOFACE) += nanoface.o
obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/
obj-$(CONFIG_USB_LINK_LAYER_TEST) += lvstest.o
diff --git a/drivers/usb/misc/nanoface.c b/drivers/usb/misc/nanoface.c
new file mode 100644
index 0000000..1201240
--- /dev/null
+++ b/drivers/usb/misc/nanoface.c
@@ -0,0 +1,95 @@
+/*
+ * Minimal driver for ALVA Nanoface USB audio interface. This driver does not
+ * support USB audio, but enables other audio I/O connections on the device.
+ *
+ * Copyright (C) 2014 Lauri Niskanen (a...@ape3000.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+
+static unsigned char init_setup[] = {0x01, 0x0b, 0x00, 0x00,
+ 0x01, 0x00, 0x00, 0x00};
+static unsigned char init_data[] = {};
+
+static void init_complete_callback(struct urb *request)
+{
+ dev_info(&request->dev->dev, "ALVA Nanoface initialized\n");
+ usb_free_urb(request);
+}
+
+static int nanoface_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ int status;
+ struct usb_device *dev;
+ struct urb *init_request;
+
+ dev = interface_to_usbdev(interface);
+
+ init_request = usb_alloc_urb(0, 0);
+ if (init_request == 0) {
+ dev_err(&dev->dev, "ALVA Nanoface initialization failed: Cannot
allocate memory for URB request\n");
+ return -ENOMEM;
+ }
+
+ dev_info(&dev->dev, "ALVA Nanoface (%04X:%04X) connected\n",
+ id->idVendor, id->idProduct);
+
+ usb_fill_control_urb(init_request, dev,
+ usb_sndctrlpipe(dev, 0), init_setup,
+ init_data, sizeof(init_data),
+ init_complete_callback, 0);
+
+ status = usb_submit_urb(init_request, 0);
+ if (status != 0) {
+ dev_err(&dev->dev, "ALVA Nanoface initialization failed: Error
%d when submitting URB\n",
+ status);
+ return status;
+ }
+
+ /* do not manage the device */
+ return -ENODEV;
+}
+
+static void nanoface_disconnect(struct usb_interface *interface)
+{
+ dev_info(&interface->dev, "ALVA Nanoface disconnected\n");
+}
+
+static struct usb_device_id nanoface_table[] = {
+ { USB_DEVICE(0x0a4a, 0xaffe) },
+ { /* Terminating entry */ }
+};
+
+MODULE_DEVICE_TABLE(usb, nanoface_table);
+
+static struct usb_driver nanoface_driver = {
+ .name = "nanoface",
+ .id_table = nanoface_table,
+ .probe = nanoface_probe,
+ .disconnect = nanoface_disconnect,
+};
+
+static int __init nanoface_init(void)
+{
+ return usb_register(&nanoface_driver);
+}
+
+static void __exit nanoface_exit(void)
+{
+ usb_deregister(&nanoface_driver);
+}
+
+module_init(nanoface_init);
+module_exit(nanoface_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lauri Niskanen <a...@ape3000.com>");
+MODULE_DESCRIPTION("ALVA Nanoface USB driver");
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
