[PATCH 6/6] ARM: dts: sun9i: Enable USB support on A80 Optimus board

[Chen-Yu Tsai]

Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
This patch does not use sunxi-common-regulators.dtsi, but adds the
regulators directly. To use the common regulators file, we would
need to use phandles and switch to preprocessor includes to support
that.

---
 arch/arm/boot/dts/sun9i-a80-optimus.dts | 72 +++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts 
b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 506948f..31010c1 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -59,6 +59,40 @@
        };
 
        soc {
+               ehci0: usb@00a00000 {
+                       status = "okay";
+               };
+
+               ohci0: usb@00a00400 {
+                       status = "okay";
+               };
+
+               usbphy0: phy@00a00800 {
+                       vbus-supply = <&reg_usb0_vbus>;
+                       status = "okay";
+               };
+
+               ehci1: usb@00a01000 {
+                       status = "okay";
+               };
+
+               usbphy1: phy@00a01800 {
+                       status = "okay";
+               };
+
+               ehci2: usb@00a02000 {
+                       status = "okay";
+               };
+
+               ohci2: usb@00a02400 {
+                       status = "okay";
+               };
+
+               usbphy2: phy@00a02800 {
+                       vbus-supply = <&reg_usb2_vbus>;
+                       status = "okay";
+               };
+
                pio: pinctrl@06000800 {
                        i2c3_pins_a: i2c3@0 {
                                /* Enable internal pull-up */
@@ -76,6 +110,20 @@
                                /* Enable internal pull-up */
                                allwinner,pull = <1>;
                        };
+
+                       usb0_vbus_pin_optimus: usb0_vbus_pin@1 {
+                               allwinner,pins = "PH4";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       usb2_vbus_pin_optimus: usb2_vbus_pin@1 {
+                               allwinner,pins = "PH5";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
                };
 
                uart0: serial@07000000 {
@@ -116,4 +164,28 @@
                        gpios = <&pio 7 0 0>;
                };
        };
+
+       reg_usb0_vbus: usb0-vbus {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb0_vbus_pin_optimus>;
+               regulator-name = "usb0-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&pio 7 4 0>; /* PH4 */
+               status = "okay";
+       };
+
+       reg_usb2_vbus: usb2-vbus {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb2_vbus_pin_optimus>;
+               regulator-name = "usb2-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&pio 7 5 0>; /* PH5 */
+               status = "okay";
+       };
 };
-- 
2.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/