On 10/22/2014 05:45 PM, Krzysztof Kozlowski wrote:
> When JIG was set to "boot on" mode, the UART connection did not work
> because it was assigned to Dock-Car cable (path: audio), not JIG-UART-ON
> cable.
>
> This was introduced in 39bf369e4ed3 ("extcon: max77693: Add support dock
> device and buttons") while adding dock features.
>
> Assign the JIG-UART-ON back to UART path.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
I want to change the name of this patch because I don't prefer to use board
name on extcon driver patch.
before - extcon: max77693: Fix extcon UART on Trats2 board
after - extcon: max77693: Fix cable name of JIG_UART_ON
Applied it.
Thanks,
Chanwoo Choi
> ---
> drivers/extcon/extcon-max77693.c | 12 +++++++-----
> 1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/extcon/extcon-max77693.c
> b/drivers/extcon/extcon-max77693.c
> index 9d21e75a7032..beaa8cd71c3b 100644
> --- a/drivers/extcon/extcon-max77693.c
> +++ b/drivers/extcon/extcon-max77693.c
> @@ -206,7 +206,7 @@ static const char *max77693_extcon_cable[] = {
> [EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON",
> [EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
> [EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
> - [EXTCON_CABLE_JIG_UART_ON] = "Dock-Car",
> + [EXTCON_CABLE_JIG_UART_ON] = "JIG-UART-ON",
> [EXTCON_CABLE_DOCK_SMART] = "Dock-Smart",
> [EXTCON_CABLE_DOCK_DESK] = "Dock-Desk",
> [EXTCON_CABLE_DOCK_AUDIO] = "Dock-Audio",
> @@ -506,9 +506,6 @@ static int max77693_muic_dock_handler(struct
> max77693_muic_info *info,
> extcon_set_cable_state(info->edev, "Dock-Smart", attached);
> extcon_set_cable_state(info->edev, "MHL", attached);
> goto out;
> - case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* Dock-Car */
> - strcpy(dock_name, "Dock-Car");
> - break;
> case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */
> strcpy(dock_name, "Dock-Desk");
> break;
> @@ -643,6 +640,11 @@ static int max77693_muic_jig_handler(struct
> max77693_muic_info *info,
> strcpy(cable_name, "JIG-UART-OFF");
> path = CONTROL1_SW_UART;
> break;
> + case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* ADC_JIG_UART_ON */
> + /* PATH:AP_UART */
> + strcpy(cable_name, "JIG-UART-ON");
> + path = CONTROL1_SW_UART;
> + break;
> default:
> dev_err(info->dev, "failed to detect %s jig cable\n",
> attached ? "attached" : "detached");
> @@ -682,13 +684,13 @@ static int max77693_muic_adc_handler(struct
> max77693_muic_info *info)
> case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:
> case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:
> case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:
> + case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:
> /* JIG */
> ret = max77693_muic_jig_handler(info, cable_type, attached);
> if (ret < 0)
> return ret;
> break;
> case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */
> - case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* Dock-Car */
> case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */
> case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */
> /*
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
