This add the necessary binding documentation for the thermal
found on Rockchip SoCs

Signed-off-by: zhaoyifeng <z...@rock-chips.com>
Signed-off-by: Caesar Wang <caesar.w...@rock-chips.com>
---
 .../bindings/thermal/rockchip-thermal.txt          | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/thermal/rockchip-thermal.txt

diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt 
b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
new file mode 100644
index 0000000..d5ff410
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -0,0 +1,45 @@
+* Temperature Sensor ADC (TSADC) on rockchip SoCs
+
+Required properties:
+- compatible: "rockchip,rk3288-tsadc"
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+             depends on the interrupt controller.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "tsadc" for the converter-clock, and "apb_pclk" for
+              the peripheral clock.
+- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description.
+
+Exiample:
+tsadc: tsadc@ff280000 {
+       compatible = "rockchip,rk3288-tsadc";
+       reg = <0xff280000 0x100>;
+       interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+       clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+       clock-names = "tsadc", "apb_pclk";
+};
+
+Example: referring to thermal sensors:
+thermal-zones {
+       cpu_thermal: cpu_thermal {
+               polling-delay-passive = <500>; /* milliseconds */
+               polling-delay = <1000>; /* milliseconds */
+
+                               /* sensor       ID */
+               thermal-sensors = <&tsadc       1>;
+
+               trips {
+                       cpu_alert0: cpu_alert {
+                               temperature = <80000>; /* millicelsius */
+                               hysteresis = <2000>; /* millicelsius */
+                               type = "passive";
+                       };
+                       cpu_crit: cpu_crit {
+                               temperature = <125000>; /* millicelsius */
+                               hysteresis = <2000>; /* millicelsius */
+                           type = "critical";
+                       };
+               };
+       };
+};
-- 
1.9.1


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to