> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index 2ac87fa..8983474 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -77,6 +77,17 @@ config I2C_AMD8111 > This driver can also be built as a module. If so, the module > will be called i2c-amd8111. > > +config I2C_AXXIA > + tristate "Axxia I2C controller" > + depends on ARCH_AXXIA || COMPILE_TEST > + default ARCH_AXXIA > + help > + Say yes if you want to support the I2C bus on Axxia platforms. > + > + Please note that this controller is limited to transfers of maximum > + 255 bytes in length. Any attempt to to a larger transfer will return > + an error. > + > config I2C_I801 > tristate "Intel 82801 (ICH/PCH)" > depends on PCI > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile > index 49bf07e..5899edb 100644 > --- a/drivers/i2c/busses/Makefile > +++ b/drivers/i2c/busses/Makefile > @@ -12,6 +12,7 @@ obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o > obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o > obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o > obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o > +obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o > obj-$(CONFIG_I2C_I801) += i2c-i801.o > obj-$(CONFIG_I2C_ISCH) += i2c-isch.o > obj-$(CONFIG_I2C_ISMT) += i2c-ismt.o
Please put it to the embedded section. ... > + idev->adapter.class = I2C_CLASS_HWMON; Being a DT driver, you most probably don't need this.
signature.asc
Description: Digital signature
