Magnus: On Wednesday 30 March 2005 05:02, Magnus Damm wrote: > Hello, > > On Tue, 29 Mar 2005 19:06:19 -0500, Ron Gage <[EMAIL PROTECTED]> wrote: > > Laptop is an HP Pavilion N5150, Intel USB chipset (UHCI). Cardbus card > > is generic ALI based USB chipset (EHCI/OHCI). USB drive is a Sony VAIO > > external case for a 2.5" drive. The chip in the usb drive has no > > manufacturer markings on it, just the following character sequences: > > CS881BAG, 0451B0C104, 107 > > I've got an external 2.5" VAIO case (VAIO original yeah, right) that > works ok what I can tell with USB2 on my laptop. Are the id:s below > the same as yours? > Here are the ID's of mine...
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04cf ProdID=8818 Rev=b0.07 S: Manufacturer=Myson Century, Inc. S: Product=USB Mass Storage Device S: SerialNumber=100 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > T: Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=04cf ProdID=8818 Rev=b0.07 > S: Manufacturer=Myson Century, Inc. > S: Product=USB Mass Storage Device > S: SerialNumber=100 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 10mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage > E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Looks like we have basically the same device. > on pccard? Maybe you need an external ac adapter? This would be remotely possible but I would discount it being probable. You see, a drive requires the most power at spin up. This thing spins up just fine regardless of what port I have it plugged into. On top of that, the USB card has a power adaptor already (plugs into the laptop's USB port) that I always use. Besides, how would I connect an external power supply to this? No connector on the drive assembly... -- Ron Gage - Pontiac, Michigan (MCP, LPIC1, A+, Net+) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
