Hi, On Tue, Sep 30, 2014 at 11:24 AM, Doug Anderson <diand...@chromium.org> wrote: > Caesar, > > On Sun, Sep 28, 2014 at 3:38 AM, Caesar Wang <caesar.w...@rock-chips.com> > wrote: >> This patch changes a dtsi file to contain the thermal data >> on RK3288 and later SoCs. This data will >> enable a thermal shutdown over 125C. >> >> Signed-off-by: Caesar Wang <caesar.w...@rock-chips.com> >> --- >> arch/arm/boot/dts/rk3xxx-cpu-thermal.dtsi | 32 >> +++++++++++++++++++++++++++++++ >> 1 file changed, 32 insertions(+) >> create mode 100644 arch/arm/boot/dts/rk3xxx-cpu-thermal.dtsi > > I haven't done lots of review of this series, but I did notice that > this file has bad spacing. It's fairly obvious in your gerrit patch > <https://chromium-review.googlesource.com/#/c/220270/1/arch/arm/boot/dts/rk3xxx-cpu-thermal.dtsi> > because gerrit (by default) shows you "tab" characters... > > In general you should use tab for indentation, not spaces. You seem > to use a mix of the two.
I suppose I should also point out that it's generally not great to name things "rk3xxx" since it makes too many predictions about how future products will behave. It's better to name things after the first relevant product. I'd just name this "rk3288-cpu-thermal.dtsi". -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
