On Tue, Sep 23, 2014 at 06:04:38PM -0500, Josh Cartwright wrote:
> The WDT's BITE_TIME warm-reset behavior can be leveraged as a last
> resort mechanism for triggering chip reset.  Usually, other restart
> methods (such as PS_HOLD) are preferrable for issuing a more complete
> reset of the chip.  As such, keep the priority of the watchdog notifier
> low.
> 
> Signed-off-by: Josh Cartwright <[email protected]>
> ---
>  drivers/watchdog/qcom-wdt.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
> index d5e46e2..eba92ef 100644
> --- a/drivers/watchdog/qcom-wdt.c
> +++ b/drivers/watchdog/qcom-wdt.c
> @@ -16,6 +16,7 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
> +#include <linux/reboot.h>
>  #include <linux/watchdog.h>
>  
>  #define WDT_RST              0x0
> @@ -25,6 +26,7 @@
>  struct qcom_wdt {
>       struct watchdog_device  wdd;
>       struct clk              *clk;
> +     struct notifier_block   restart_nb;
>       void __iomem            *base;
>  };
>  
> @@ -86,6 +88,23 @@ static const struct watchdog_info qcom_wdt_info = {
>       .identity       = KBUILD_MODNAME,
>  };
>  
> +static int qcom_wdt_restart(struct notifier_block *nb, unsigned long action,
> +                         void *data)
> +{
> +     struct qcom_wdt *wdt = container_of(nb, struct qcom_wdt, restart_nb);
> +
> +     /*
> +      * Trigger watchdog bite:
> +      *    Setup BITE_TIME to be very low, and enable WDT.
> +      *      0x31F3 => 390ms @ 32kHz, also value at reset

What happens if you set it to a lower value ? If you set it to, say,
0x100, would the timeout be ~8ms ? Wouldn't that make more sense ?
Or at least something like 0x800, which should make it around 64 ms,
or 0x400 for 32 ms.

[ In other words, I don't really see the point for a 390 ms wait here ]

> +      */
> +     writel(0, wdt->base + WDT_EN);
> +     writel(1, wdt->base + WDT_RST);
> +     writel(0x31F3, wdt->base + WDT_BITE_TIME);
> +     writel(1, wdt->base + WDT_EN);

You should have some mdelay() here, larger than the expected timeout.

Thanks,
Guenter

> +     return NOTIFY_DONE;
> +}
> +
>  static int qcom_wdt_probe(struct platform_device *pdev)
>  {
>       struct qcom_wdt *wdt;
> @@ -141,6 +160,14 @@ static int qcom_wdt_probe(struct platform_device *pdev)
>               return ret;
>       }
>  
> +     /*
> +      * WDT restart notifier has priority 0 (use as a last resort)
> +      */
> +     wdt->restart_nb.notifier_call = qcom_wdt_restart;
> +     ret = register_restart_handler(&wdt->restart_nb);
> +     if (ret)
> +             dev_err(&pdev->dev, "failed to setup restart handler\n");
> +
>       platform_set_drvdata(pdev, wdt);
>       return 0;
>  }
> @@ -149,6 +176,7 @@ static int qcom_wdt_remove(struct platform_device *pdev)
>  {
>       struct qcom_wdt *wdt = platform_get_drvdata(pdev);
>  
> +     unregister_restart_handler(&wdt->restart_nb);
>       watchdog_unregister_device(&wdt->wdd);
>       clk_disable_unprepare(wdt->clk);
>       return 0;
> -- 
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> hosted by The Linux Foundation
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to