From: Wenyou Yang <wenyou.y...@atmel.com>
Ensure that the L2 cache configuration is optimal to avoid depending on the
bootloader to set it correctly.
Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
---
arch/arm/mach-at91/board-dt-sama5.c | 47 ++++++++++++++++++++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/board-dt-sama5.c
b/arch/arm/mach-at91/board-dt-sama5.c
index 548de4ad6937..7cbe0d9daf2b 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -13,12 +13,14 @@
#include <linux/gpio.h>
#include <linux/micrel_phy.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/clk-provider.h>
#include <asm/setup.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -35,8 +37,52 @@ static void __init sama5_dt_timer_init(void)
at91sam926x_pit_init();
}
+static void __init at91_l2x0_init(void)
+{
+ struct device_node *np;
+ void __iomem *l2cc_base;
+ u32 reg;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+ if (!np)
+ return;
+
+ l2cc_base = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!l2cc_base) {
+ pr_err("L2C-310 unable to map registers\n");
+ return;
+ }
+
+ /* Prefetch Control */
+ reg = readl_relaxed(l2cc_base + L310_PREFETCH_CTRL);
+ reg &= ~L310_PREFETCH_CTRL_OFFSET_MASK;
+ reg |= 0x01 & L310_PREFETCH_CTRL_OFFSET_MASK;
+ reg |= L310_PREFETCH_CTRL_DBL_LINEFILL_INCR;
+ reg |= L310_PREFETCH_CTRL_PREFETCH_DROP;
+ reg |= L310_PREFETCH_CTRL_DATA_PREFETCH;
+ reg |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
+ reg |= L310_PREFETCH_CTRL_DBL_LINEFILL;
+ writel_relaxed(reg, l2cc_base + L310_PREFETCH_CTRL);
+
+ /* Power Control */
+ reg = readl_relaxed(l2cc_base + L310_POWER_CTRL);
+ reg |= L310_STNDBY_MODE_EN;
+ reg |= L310_DYNAMIC_CLK_GATING_EN;
+ writel_relaxed(reg, l2cc_base + L310_POWER_CTRL);
+
+ /* Disable interrupts */
+ writel_relaxed(0x00, l2cc_base + L2X0_INTR_MASK);
+ writel_relaxed(0x01ff, l2cc_base + L2X0_INTR_CLEAR);
+
+ l2x0_of_init(0, ~0UL);
+}
+
static void __init sama5_dt_device_init(void)
{
+ at91_l2x0_init();
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -66,5 +112,4 @@ DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5 (Device Tree)")
.init_early = at91_dt_initialize,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_alt_dt_board_compat,
- .l2c_aux_mask = ~0UL,
MACHINE_END
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
