On Tue, Sep 16, 2014 at 08:58:12PM +0100, Jonathan Richardson wrote: > Adds initial support for the Cygnus SoC based on Broadcom’s iProc series. > > Reviewed-by: Ray Jui <r...@broadcom.com> > Reviewed-by: Desmond Liu <desmo...@broadcom.com> > Reviewed-by: JD (Jiandong) Zheng <jdzh...@broadcom.com> > Tested-by: Jonathan Richardson <jonat...@broadcom.com> > Signed-off-by: Jonathan Richardson <jonat...@broadcom.com> > --- > arch/arm/mach-bcm/Kconfig | 34 +++++++ > arch/arm/mach-bcm/Makefile | 3 + > arch/arm/mach-bcm/board_bcm_cygnus.c | 166 > ++++++++++++++++++++++++++++++++++
Is Cygnus an SoC or a board? > 3 files changed, 203 insertions(+) > create mode 100644 arch/arm/mach-bcm/board_bcm_cygnus.c > > diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig > index fc93800..58e0f20 100644 > --- a/arch/arm/mach-bcm/Kconfig > +++ b/arch/arm/mach-bcm/Kconfig > @@ -5,6 +5,40 @@ menuconfig ARCH_BCM > > if ARCH_BCM > > +config ARCH_BCM_IPROC > + bool "Broadcom ARMv7 iProc boards" if ARCH_MULTI_V7 > + select ARM_GIC > + select CACHE_L2X0 > + select HAVE_ARM_SCU if SMP I didn't spot any SMP code in this series. > + select HAVE_ARM_TWD if LOCAL_TIMERS > + select HAVE_CLK > + select CLKSRC_OF > + select CLKSRC_MMIO > + select LOCAL_TIMERS if SMP > + select GENERIC_CLOCKEVENTS_BUILD You don't need to select this. > + select GENERIC_CLOCKEVENTS > + select ARM_GLOBAL_TIMER > + select ARCH_REQUIRE_GPIOLIB > + select ARM_AMBA > + select PINCTRL > + select DEBUG_UART_8250 > + help > + This enables support for systems based on Broadcom IPROC architected > SoCs. > + The IPROC complex contains one or more ARM CPUs along with common > + core periperals. Application specific SoCs are created by adding a > + uArchitecture containing peripherals outside of the IPROC complex. > + Currently supported SoCs are Cygnus. > + > +menu "iProc SoC based Machine types" > + depends on ARCH_BCM_IPROC > + > + config ARCH_BCM_CYGNUS > + bool "Support Broadcom Cygnus board" > + select USB_ARCH_HAS_EHCI if USB_SUPPORT > + help > + Support for Broadcom Cygnus SoC. > +endmenu > + > config ARCH_BCM_MOBILE > bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 > select ARCH_REQUIRE_GPIOLIB > diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile > index b19a396..dd14a10 100644 > --- a/arch/arm/mach-bcm/Makefile > +++ b/arch/arm/mach-bcm/Makefile > @@ -10,6 +10,9 @@ > # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > # GNU General Public License for more details. > > +# Cygnus > +obj-$(CONFIG_ARCH_BCM_CYGNUS) += board_bcm_cygnus.o > + > # BCM281XX > obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o > > diff --git a/arch/arm/mach-bcm/board_bcm_cygnus.c > b/arch/arm/mach-bcm/board_bcm_cygnus.c > new file mode 100644 > index 0000000..d67555a > --- /dev/null > +++ b/arch/arm/mach-bcm/board_bcm_cygnus.c > @@ -0,0 +1,166 @@ > +/* > + * Copyright 2014 Broadcom Corporation. All rights reserved. > + * > + * Unless you and Broadcom execute a separate written software license > + * agreement governing use of this software, this software is licensed to you > + * under the terms of the GNU General Public License version 2, available at > + * http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). Why don't we point at the gnu.org copy as we do elsewhere? > + */ > + > +#include <linux/of_address.h> > +#include <linux/of_platform.h> > +#include <linux/clocksource.h> > +#include <linux/clk-provider.h> > +#include <linux/delay.h> > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > +#include <asm/proc-fns.h> > +#include <asm/hardware/cache-l2x0.h> > + > +#define CRMU_MAIL_BOX1 0x03024028 Please don't hard code addresses in board files. > +#define CRMU_SOFT_RESET_CMD 0xFFFFFFFF > + > +/* CRU_RESET register */ > +static void * __iomem crmu_mail_box1_reg; > + > +#ifdef CONFIG_NEON > + > +#define CRU_BASE 0x1800e000 Another hard coded address that needs to go. > +#define CRU_SIZE 0x34 > +#define CRU_CONTROL_OFFSET 0x0 > +#define CRU_PWRDWN_EN_OFFSET 0x4 > +#define CRU_PWRDWN_STATUS_OFFSET 0x8 > +#define CRU_NEON0_HW_RESET 6 > +#define CRU_CLAMP_ON_NEON0 20 > +#define CRU_PWRONIN_NEON0 21 > +#define CRU_PWRONOUT_NEON0 21 > +#define CRU_PWROKIN_NEON0 22 > +#define CRU_PWROKOUT_NEON0 22 > +#define CRU_STATUS_DELAY_NS 500 > +#define CRU_MAX_RETRY_COUNT 10 > +#define CRU_RETRY_INTVL_US 1 > + > +/* Power up the NEON/VFPv3 block. */ > +static void bcm_cygnus_powerup_neon(void) > +{ > + void * __iomem cru_base = ioremap_nocache(CRU_BASE, CRU_SIZE); Why not plain ioremap? > + u32 reg, i; > + > + BUG_ON(!cru_base); This seems a little extreme. Can;t we continue without NEON? > + > + /* De-assert the neon hardware block reset */ > + reg = readl(cru_base + CRU_CONTROL_OFFSET); > + reg &= ~(1 << CRU_NEON0_HW_RESET); > + writel(reg, cru_base + CRU_CONTROL_OFFSET); > + > + /* Assert the power ON register bit */ > + reg = readl(cru_base + CRU_PWRDWN_EN_OFFSET); > + reg |= (1 << CRU_PWRONIN_NEON0); > + writel(reg, cru_base + CRU_PWRDWN_EN_OFFSET); > + > + /* > + * Wait up to 10 usec in 1 usec increments for the > + * status register to acknowledge the power ON assert > + */ > + for (i = 0; i < CRU_MAX_RETRY_COUNT; i++) { > + reg = readl(cru_base + CRU_PWRDWN_STATUS_OFFSET); > + if (reg & CRU_PWRONOUT_NEON0) > + break; > + > + udelay(CRU_RETRY_INTVL_US); > + } > + > + if (i == CRU_MAX_RETRY_COUNT) > + panic("NEON power ON register not acknowledged\n"); We can't just disable NEON if we fail to enable the HW block? [...] > +static void __init bcm_cygnus_timer_init(void) > +{ > + /* Initialize all clocks declared in device tree */ > + of_clk_init(NULL); > + > + clocksource_of_init(); > +} If you take a look at time_init in arch/arm/kernel/time.c you'll see this is redundant. Get rid of this. > + > +static void __init bcm_cygnus_init(void) > +{ > + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); > + > + l2x0_of_init(0, ~0UL); > + > + crmu_mail_box1_reg = ioremap_nocache(CRMU_MAIL_BOX1, SZ_4); Why not plain ioremap? > + BUG_ON(!crmu_mail_box1_reg); We only use this for reboot later on, so do we need to blow up so spectacularly in this case? > + > +#ifdef CONFIG_NEON > + bcm_cygnus_powerup_neon(); > +#endif > +} > + > +/* > + * Reset the system > + */ > +void bcm_cygnus_restart(enum reboot_mode mode, const char *cmd) > +{ > + /* Send reset command to M0 via Mailbox. */ > + writel(CRMU_SOFT_RESET_CMD, crmu_mail_box1_reg); > + iounmap(crmu_mail_box1_reg); > + > + /* Wait for M0 to reset the chip. */ > + while (1) > + cpu_do_idle(); > +} This doesn't have to live in the machine descriptor. It could be a separate driver. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
