On Mon, Sep 15, 2014 at 10:05:24AM -0500, Clark Williams wrote:
> Paul,
>
> Here's the result of our conversation Friday, regarding the per-CPU and
> boost priorities:
>
> Rename CONFIG_RCU_BOOST_PRIO to CONFIG_RCU_KTHREAD_PRIO and use this
> value for both the per-CPU kthreads (rcuc/N) and the rcu boosting
> threads (rcub/n).
>
> Also, create the module_parameter rcutree.kthread_prio to be used on
> the kernel command line at boot to set a new value
> (rcutree.kthread_prio=N).
>
> Signed-off-by: Clark Williams <clark.willi...@gmail.com>
Thank you, Clark!
I queued this, porting to rcu/dev, which resulted in the following
patch. Please check this to make sure it still reflects your intent.
In the meantime, I will start testing.
Thanx, Paul
------------------------------------------------------------------------
rcu: unify boost and kthread priorities
Rename CONFIG_RCU_BOOST_PRIO to CONFIG_RCU_KTHREAD_PRIO and use this
value for both the per-CPU kthreads (rcuc/N) and the rcu boosting
threads (rcub/n).
Also, create the module_parameter rcutree.kthread_prio to be used on
the kernel command line at boot to set a new value (rcutree.kthread_prio=N).
Signed-off-by: Clark Williams <clark.willi...@gmail.com>
[ paulmck: Ported to rcu/dev. ]
Signed-off-by: Paul E. McKenney <paul...@linux.vnet.ibm.com>
diff --git a/Documentation/kernel-parameters.txt
b/Documentation/kernel-parameters.txt
index e95b0f43229f..c40395720a6f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2899,6 +2899,12 @@ bytes respectively. Such letter suffixes can also be
entirely omitted.
quiescent states. Units are jiffies, minimum
value is one, and maximum value is HZ.
+ rcutree.kthread_prio= [KNL,BOOT]
+ Set the SCHED_FIFO priority of the RCU
+ per-CPU kthreads (rcuc/N). This value is also
+ used for the priority of the RCU boost threads
+ (rcub/N). Valid values are 1-99.
+
rcutree.rcu_nocb_leader_stride= [KNL]
Set the number of NOCB kthread groups, which
defaults to the square root of the number of
diff --git a/init/Kconfig b/init/Kconfig
index 95a1447a33bd..8a2b97c4026a 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -672,30 +672,31 @@ config RCU_BOOST
Say Y here if you are working with real-time apps or heavy loads
Say N here if you are unsure.
-config RCU_BOOST_PRIO
- int "Real-time priority to boost RCU readers to"
+config RCU_KTHREAD_PRIO
+ int "Real-time priority to use for RCU worker threads"
range 1 99
depends on RCU_BOOST
default 1
help
- This option specifies the real-time priority to which long-term
- preempted RCU readers are to be boosted. If you are working
- with a real-time application that has one or more CPU-bound
- threads running at a real-time priority level, you should set
- RCU_BOOST_PRIO to a priority higher then the highest-priority
- real-time CPU-bound thread. The default RCU_BOOST_PRIO value
- of 1 is appropriate in the common case, which is real-time
+ This option specifies the SCHED_FIFO priority value that will be
+ assigned to the rcuc/n and rcub/n threads and is also the value
+ used for RCU_BOOST (if enabled). If you are working with a
+ real-time application that has one or more CPU-bound threads
+ running at a real-time priority level, you should set
+ RCU_KTHREAD_PRIO to a priority higher than the highest-priority
+ real-time CPU-bound application thread. The default RCU_KTHREAD_PRIO
+ value of 1 is appropriate in the common case, which is real-time
applications that do not have any CPU-bound threads.
Some real-time applications might not have a single real-time
thread that saturates a given CPU, but instead might have
multiple real-time threads that, taken together, fully utilize
- that CPU. In this case, you should set RCU_BOOST_PRIO to
+ that CPU. In this case, you should set RCU_KTHREAD_PRIO to
a priority higher than the lowest-priority thread that is
conspiring to prevent the CPU from running any non-real-time
tasks. For example, if one thread at priority 10 and another
thread at priority 5 are between themselves fully consuming
- the CPU time on a given CPU, then RCU_BOOST_PRIO should be
+ the CPU time on a given CPU, then RCU_KTHREAD_PRIO should be
set to priority 6 or higher.
Specify the real-time priority, or take the default if unsure.
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index cbd08fc4b706..77f9376f3f8d 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -30,12 +30,13 @@
#include <linux/smpboot.h>
#include "../time/tick-internal.h"
-#define RCU_KTHREAD_PRIO 1
-
#ifdef CONFIG_RCU_BOOST
#include "../locking/rtmutex_common.h"
-#define RCU_BOOST_PRIO CONFIG_RCU_BOOST_PRIO
+
+/* rcuc/rcub kthread realtime priority */
+static int kthread_prio = CONFIG_RCU_KTHREAD_PRIO;
+module_param(kthread_prio, int, 0644);
/*
* Control variables for per-CPU and per-rcu_node kthreads. These
@@ -46,11 +47,7 @@ DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
DEFINE_PER_CPU(char, rcu_cpu_has_work);
-#else /* #ifdef CONFIG_RCU_BOOST */
-
-#define RCU_BOOST_PRIO RCU_KTHREAD_PRIO
-
-#endif /* #else #ifdef CONFIG_RCU_BOOST */
+#endif /* #ifdef CONFIG_RCU_BOOST */
#ifdef CONFIG_RCU_NOCB_CPU
static cpumask_var_t rcu_nocb_mask; /* CPUs to have callbacks offloaded. */
@@ -95,6 +92,9 @@ static void __init rcu_bootup_announce_oddness(void)
pr_info("\tBoot-time adjustment of leaf fanout to %d.\n",
rcu_fanout_leaf);
if (nr_cpu_ids != NR_CPUS)
pr_info("\tRCU restricting CPUs from NR_CPUS=%d to
nr_cpu_ids=%d.\n", NR_CPUS, nr_cpu_ids);
+#ifdef CONFIG_RCU_BOOST
+ pr_info("\tRCU kthread priority: %d.\n", kthread_prio);
+#endif
}
#ifdef CONFIG_TREE_PREEMPT_RCU
@@ -1326,7 +1326,7 @@ static int rcu_spawn_one_boost_kthread(struct rcu_state
*rsp,
smp_mb__after_unlock_lock();
rnp->boost_kthread_task = t;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
- sp.sched_priority = RCU_BOOST_PRIO;
+ sp.sched_priority = kthread_prio;
sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */
return 0;
@@ -1343,7 +1343,7 @@ static void rcu_cpu_kthread_setup(unsigned int cpu)
{
struct sched_param sp;
- sp.sched_priority = RCU_KTHREAD_PRIO;
+ sp.sched_priority = kthread_prio;
sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
