On Thursday 24 March 2005 12:54 pm, Michael Tokarev wrote: > Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled > ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 193 > ttyS4 at I/O 0xa400 (irq = 193) is a 16550A > ttyS5 at I/O 0xa000 (irq = 193) is a 16550A > > And oh.. now the ports are at ttyS[45], I used for them > to be at ttyS[23]... Oh well...
Someday maybe we should make serial rely on PNP, and only use the compiled-in table when PNP isn't available or is turned off. Then ports would just be numbered sequentially as they're discovered. And it would also help with the current situation where ttyS0/1 are often discovered two or three times. > The patch does not apply to 2.6.11 - several hunks, notable > all the parport stuff, fails. I'll dig into this a bit > later today (hopefully). 8250 changes are enouth for the > serial port to work, parallel port still does not work -- > without the missing patch hunks. My patch was against the -mm tree, and I think one of the differences between 2.5.11 and the -mm tree was the removal of 9835 from parport_pc. Sounds like you've figured that out already :-) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
