Dirk Gouders <d...@gouders.net> writes:
> Bjorn Helgaas <bhelg...@google.com> writes:
>
>> I want to fix this regression before v3.17. Dirk, can you test the
>> following patch on top of v3.17-rc2? I'm hoping you can try this on your
>> test machine in conjunction with your acpi_pci_root_add() and
>> pci_scan_device() patches. If I understand correctly, you were able to
>> reproduce the FC adapter not showing up, and if you can verify that it does
>> show with those patches + this revert, I think that's good enough for now.
>
> I tried this patch on the test machine but after rebooting I lost remote
> access -- details will have to wait until tonight.
>
> Independent of the result of this test I planned to go to the office,
> this evening to also do this test on the VX50 and to also try Yinghai's
> suggestion to reset the PCIe link on it. I'd like to see if the
> behavior of the VX50 differs from that of the test machine.
>
> Probably obvious but did I undestand correctly that Yinghai's patches +
>
> echo 1 > /sys/bus/.../pcie_link_disable
> echo 0 > /sys/bus/.../pcie_link_disable
>
> is exactly identical to this?
>
> setpci -s ... 0xc0.b=0x18
> setpci -s ... 0xc0.b=0x08
>
> Please let me know if there is anything else you want me to test on the
> VX50.
So, I did some tests on the VX50 which probably wasn't the worst idea,
because it behaves different than the test machine.
Summary:
1) Bjorn's back pocket patch works on the VX50.
On the test machine it causes a trace, mount_root has to do with
it. I tried to use netconsole but it complained the interface were
not ready.
2) Reset with setpci as above did not work on the VX50.
3) Reset with Bjorn's commands
DEV=00:0e.0
setpci -s$DEV BRIDGE_CONTROL.W=0x0040
sleep 1
setpci -s$DEV BRIDGE_CONTROL.W=0x0000
sleep 1
echo 1 > /sys/bus/pci/rescan
let the FC adapter appear but there are errors that I cannot really
interpret.
4) Reset with Yinghai's patches and
echo 1 > /sys/bus/pci/devices/0000\:00\:0e.0/pcie_link_disable
echo 0 > /sys/bus/pci/devices/0000\:00\:0e.0/pcie_link_disable
echo 1 > /sys/bus/pci/rescan
gives a similar resut to 3).
I will apply dmesg and lspci output at the end, hoping the numbering
above allows proper assignment.
Dirk
------------------------------------------------------------------------
1) lspci and dmesg with back pocket patch
-+-[0000:80]-+-00.0 NVIDIA Corporation CK804 Memory Controller
| +-01.0 NVIDIA Corporation CK804 Memory Controller
| +-07.0 NVIDIA Corporation CK804 Serial ATA Controller
| +-08.0 NVIDIA Corporation CK804 Serial ATA Controller
| +-0a.0 NVIDIA Corporation CK804 Ethernet Controller
| +-0b.0-[81-85]--
| +-0c.0-[86-8a]--
| +-0d.0-[8b-8f]--
| \-0e.0-[90-94]--
\-[0000:00]-+-00.0 NVIDIA Corporation CK804 Memory Controller
+-01.0 NVIDIA Corporation CK804 ISA Bridge
+-01.1 NVIDIA Corporation CK804 SMBus
+-02.0 NVIDIA Corporation CK804 USB Controller
+-02.1 NVIDIA Corporation CK804 USB Controller
+-06.0 NVIDIA Corporation CK804 IDE
+-07.0 NVIDIA Corporation CK804 Serial ATA Controller
+-08.0 NVIDIA Corporation CK804 Serial ATA Controller
+-09.0-[01]--+-06.0 Intel Corporation 82541GI Gigabit Ethernet
Controller
| \-09.0 XGI Technology Inc. (eXtreme Graphics
Innovation) Z7/Z9 (XG20 core)
+-0a.0 NVIDIA Corporation CK804 Ethernet Controller
+-0b.0-[02]--
+-0c.0-[03]--
+-0d.0-[05]--
+-0e.0-[0a]----00.0 LSI Logic / Symbios Logic FC949ES Fibre
Channel Adapter
+-18.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-18.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-18.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-18.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-18.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-19.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-19.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-19.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-19.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-19.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1a.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1a.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1a.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1a.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-1a.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1b.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1b.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1b.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1b.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-1b.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1c.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1c.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1c.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1c.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-1c.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1d.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1d.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1d.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1d.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-1d.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1e.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1e.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1e.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1e.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-1e.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1f.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1f.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1f.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1f.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
\-1f.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
[ 0.000000] Linux version 3.17.0-rc4-00346-g186cec3-dirty (root@quad) (gcc
version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #21 SMP Sat Sep 13 20:20:40
CEST 2014
[ 0.000000] Command line: root=/dev/sda2 dyndbg="file drivers/pci/* +pf"
log_buf_len=10M
[ 0.000000] tseg: 00cfc00000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ca000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007ffe9fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffea000-0x000000007fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000cfbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfc00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000a2fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: NVIDIA CK8 /Tyan Transport VX50-B4985, BIOS TYAN Transport
VX50 B4985 BIOS V3.01.B30 11/27/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0xa30000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000a30000000 aka 41728M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfc00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f7770-0x000f777f] mapped at
[ffff8800000f7770]
[ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01937000, 0x01937fff] PGTABLE
[ 0.000000] BRK [0x01938000, 0x01938fff] PGTABLE
[ 0.000000] BRK [0x01939000, 0x01939fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xa2fe00000-0xa2fffffff]
[ 0.000000] [mem 0xa2fe00000-0xa2fffffff] page 2M
[ 0.000000] BRK [0x0193a000, 0x0193afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xa2c000000-0xa2fdfffff]
[ 0.000000] [mem 0xa2c000000-0xa2fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xa00000000-0xa2bffffff]
[ 0.000000] [mem 0xa00000000-0xa2bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7ffdffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7fdfffff] page 2M
[ 0.000000] [mem 0x7fe00000-0x7ffdffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x80000000-0xcfbfffff]
[ 0.000000] [mem 0x80000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfbfffff] page 2M
[ 0.000000] BRK [0x0193b000, 0x0193bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x9ffffffff]
[ 0.000000] [mem 0x100000000-0x9ffffffff] page 1G
[ 0.000000] log_buf_len: 16777216 bytes
[ 0.000000] early log buf free: 257840(98%)
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F77F0 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x000000007FFE0AAB 000038 (v01 PTLTD RSDT
06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x000000007FFE4C98 000074 (v01 NVIDIA CK8S
06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 0x000000007FFE0AE3 0041B5 (v01 NVIDIA CK8
06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000007FFEAFC0 000040
[ 0.000000] ACPI: SSDT 0x000000007FFE4D0C 005084 (v01 AMD POWERNOW
06040000 AMD 00000001)
[ 0.000000] ACPI: SPCR 0x000000007FFE9D90 000050 (v01 PTLTD $UCRTBL$
06040000 PTL 00000001)
[ 0.000000] ACPI: APIC 0x000000007FFE9DE0 0001F8 (v01 PTLTD ? APIC
06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x000000007FFE9FD8 000028 (v01 PTLTD $SBFTBL$
06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of physical nodes 8
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000130000000
[ 0.000000] Node 1 MemBase 0000000130000000 Limit 0000000230000000
[ 0.000000] Node 2 MemBase 0000000230000000 Limit 0000000330000000
[ 0.000000] Node 3 MemBase 0000000330000000 Limit 0000000430000000
[ 0.000000] Node 4 MemBase 0000000430000000 Limit 0000000530000000
[ 0.000000] Node 5 MemBase 0000000530000000 Limit 0000000630000000
[ 0.000000] Node 6 MemBase 0000000630000000 Limit 0000000830000000
[ 0.000000] Node 7 MemBase 0000000830000000 Limit 0000000a30000000
[ 0.000000] BSP APIC ID: 04
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fffc000-0x12fffffff]
[ 0.000000] Initmem setup node 1 [mem 0x130000000-0x22fffffff]
[ 0.000000] NODE_DATA [mem 0x22fffc000-0x22fffffff]
[ 0.000000] Initmem setup node 2 [mem 0x230000000-0x32fffffff]
[ 0.000000] NODE_DATA [mem 0x32fffc000-0x32fffffff]
[ 0.000000] Initmem setup node 3 [mem 0x330000000-0x42fffffff]
[ 0.000000] NODE_DATA [mem 0x42fffc000-0x42fffffff]
[ 0.000000] Initmem setup node 4 [mem 0x430000000-0x52fffffff]
[ 0.000000] NODE_DATA [mem 0x52fffc000-0x52fffffff]
[ 0.000000] Initmem setup node 5 [mem 0x530000000-0x62fffffff]
[ 0.000000] NODE_DATA [mem 0x62fffc000-0x62fffffff]
[ 0.000000] Initmem setup node 6 [mem 0x630000000-0x82fffffff]
[ 0.000000] NODE_DATA [mem 0x82fffc000-0x82fffffff]
[ 0.000000] Initmem setup node 7 [mem 0x830000000-0xa2fffffff]
[ 0.000000] NODE_DATA [mem 0xa2effa000-0xa2effdfff]
[ 0.000000] [ffffea0004280000-ffffea00043fffff] potential offnode
page_structs
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD ->
[ffff88012be00000-ffff88012f7fffff] on node 0
[ 0.000000] [ffffea0007a80000-ffffea0007bfffff] potential offnode
page_structs
[ 0.000000] [ffffea0004400000-ffffea0007bfffff] PMD ->
[ffff88022be00000-ffff88022f5fffff] on node 1
[ 0.000000] [ffffea000b280000-ffffea000b3fffff] potential offnode
page_structs
[ 0.000000] [ffffea0007c00000-ffffea000b3fffff] PMD ->
[ffff88032be00000-ffff88032f5fffff] on node 2
[ 0.000000] [ffffea000ea80000-ffffea000ebfffff] potential offnode
page_structs
[ 0.000000] [ffffea000b400000-ffffea000ebfffff] PMD ->
[ffff88042be00000-ffff88042f5fffff] on node 3
[ 0.000000] [ffffea0012280000-ffffea00123fffff] potential offnode
page_structs
[ 0.000000] [ffffea000ec00000-ffffea00123fffff] PMD ->
[ffff88052be00000-ffff88052f5fffff] on node 4
[ 0.000000] [ffffea0015a80000-ffffea0015bfffff] potential offnode
page_structs
[ 0.000000] [ffffea0012400000-ffffea0015bfffff] PMD ->
[ffff88062be00000-ffff88062f5fffff] on node 5
[ 0.000000] [ffffea001ca80000-ffffea001cbfffff] potential offnode
page_structs
[ 0.000000] [ffffea0015c00000-ffffea001cbfffff] PMD ->
[ffff880827e00000-ffff88082edfffff] on node 6
[ 0.000000] [ffffea001cc00000-ffffea0023bfffff] PMD ->
[ffff880a26600000-ffff880a2d5fffff] on node 7
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0xa2fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00098fff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffdffff]
[ 0.000000] node 0: [mem 0x80000000-0xcfbfffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] node 1: [mem 0x130000000-0x22fffffff]
[ 0.000000] node 2: [mem 0x230000000-0x32fffffff]
[ 0.000000] node 3: [mem 0x330000000-0x42fffffff]
[ 0.000000] node 4: [mem 0x430000000-0x52fffffff]
[ 0.000000] node 5: [mem 0x530000000-0x62fffffff]
[ 0.000000] node 6: [mem 0x630000000-0x82fffffff]
[ 0.000000] node 7: [mem 0x830000000-0xa2fffffff]
[ 0.000000] On node 0 totalpages: 1047416
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3992 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11578 pages used for memmap
[ 0.000000] DMA32 zone: 846816 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 2 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 3 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 4 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 5 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 6 totalpages: 2097152
[ 0.000000] Normal zone: 28672 pages used for memmap
[ 0.000000] Normal zone: 2097152 pages, LIFO batch:31
[ 0.000000] On node 7 totalpages: 2097152
[ 0.000000] Normal zone: 28672 pages used for memmap
[ 0.000000] Normal zone: 2097152 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x09] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0b] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0c] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0d] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0e] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0f] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x18] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x19] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x1a] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x1b] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x1c] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x1d] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1e] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1f] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x21] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x23] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 32 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000c9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ca000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ffe0000-0x7ffe9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ffea000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfc00000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfff7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff80000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32
nr_node_ids:8
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s79296 r8192
d23104 u524288
[ 0.000000] pcpu-alloc: s79296 r8192 d23104 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 [1] 04 05 06 07
[ 0.000000] pcpu-alloc: [2] 08 09 10 11 [3] 12 13 14 15
[ 0.000000] pcpu-alloc: [4] 16 17 18 19 [5] 20 21 22 23
[ 0.000000] pcpu-alloc: [6] 24 25 26 27 [7] 28 29 30 31
[ 0.000000] Built 8 zonelists in Zone order, mobility grouping on. Total
pages: 10341233
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda2 dyndbg="file drivers/pci/*
+pf" log_buf_len=10M
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xd0000000-0xd3ffffff] (64MB)
[ 0.000000] AGP: Node 1: aperture [bus addr 0xd0000000-0xd3ffffff] (64MB)
[ 0.000000] AGP: Node 2: aperture [bus addr 0xd0000000-0xd3ffffff] (64MB)
[ 0.000000] AGP: Node 3: aperture [bus addr 0xd0000000-0xd3ffffff] (64MB)
[ 0.000000] AGP: Node 4: aperture [bus addr 0xd0000000-0xd3ffffff] (64MB)
[ 0.000000] AGP: Node 5: aperture [bus addr 0xd0000000-0xd3ffffff] (64MB)
[ 0.000000] AGP: Node 6: aperture [bus addr 0xd0000000-0xd3ffffff] (64MB)
[ 0.000000] AGP: Node 7: aperture [bus addr 0xd0000000-0xd3ffffff] (64MB)
[ 0.000000] Memory: 41266556K/41938400K available (4485K kernel code, 694K
rwdata, 2500K rodata, 936K init, 776K bss, 671844K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:680 0
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] tsc: Detected 1908.775 MHz processor
[ 0.000017] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3817.55 BogoMIPS (lpj=7635100)
[ 0.000317] pid_max: default: 32768 minimum: 301
[ 0.000565] ACPI: Core revision 20140724
[ 0.008550] ACPI: All ACPI Tables successfully acquired
[ 0.017392] Dentry cache hash table entries: 8388608 (order: 14, 67108864
bytes)
[ 0.067262] Inode-cache hash table entries: 4194304 (order: 13, 33554432
bytes)
[ 0.091507] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.091848] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.094117] CPU: Physical Processor ID: 0
[ 0.094316] CPU: Processor Core ID: 0
[ 0.094466] mce: CPU supports 6 MCE banks
[ 0.094621] LVT offset 0 assigned for vector 0xf9
[ 0.094777] process: using AMD E400 aware idle routine
[ 0.094930] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.095389] Freeing SMP alternatives memory: 20K (ffffffff8186e000 -
ffffffff81873000)
[ 0.095746] Switched APIC routing to physical flat.
[ 0.096365] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.136186] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 HE (fam:
10, model: 02, stepping: 03)
[ 0.242242] Performance Events: AMD PMU driver.
[ 0.242454] ... version: 0
[ 0.242604] ... bit width: 48
[ 0.242738] ... generic registers: 4
[ 0.242883] ... value mask: 0000ffffffffffff
[ 0.243030] ... max period: 00007fffffffffff
[ 0.243177] ... fixed-purpose events: 0
[ 0.243311] ... event mask: 000000000000000f
[ 0.245659] x86: Booting SMP configuration:
[ 0.245831] .... node #0, CPUs: #1 #2 #3
[ 0.286465] .... node #1, CPUs: #4 #5 #6 #7
[ 0.435176] .... node #2, CPUs: #8 #9 #10 #11
[ 0.589003] .... node #3, CPUs: #12 #13 #14 #15
[ 0.738981] .... node #4, CPUs: #16 #17 #18 #19
[ 0.890916] .... node #5, CPUs: #20 #21 #22 #23
[ 1.042696] .... node #6, CPUs: #24 #25 #26 #27
[ 1.194565] .... node #7, CPUs: #28 #29 #30 #31
[ 1.345951] x86: Booted up 8 nodes, 32 CPUs
[ 1.346259] smpboot: Total of 32 processors activated (122183.78 BogoMIPS)
[ 1.368246] devtmpfs: initialized
[ 1.369104] PM: Registering ACPI NVS region [mem 0x7ffea000-0x7fffffff]
(90112 bytes)
[ 1.370659] NET: Registered protocol family 16
[ 1.371198] cpuidle: using governor ladder
[ 1.371346] cpuidle: using governor menu
[ 1.371519] node 0 link 1: io port [1000, 3fff]
[ 1.371523] node 1 link 1: io port [b000, bfff]
[ 1.371525] node 1 link 1: io port [9000, 9fff]
[ 1.371528] TOM: 00000000d0000000 aka 3328M
[ 1.371676] node 0 link 1: mmio [d4000000, dbffffff]
[ 1.371680] node 1 link 1: mmio [dc000000, dc3fffff]
[ 1.371682] node 0 link 1: mmio [a0000, bffff]
[ 1.371685] node 0 link 1: mmio [e0000000, e7ffffff]
[ 1.371688] node 1 link 1: mmio [e8000000, efffffff]
[ 1.371690] TOM2: 0000000a30000000 aka 41728M
[ 1.371840] bus: [bus 00-7f] on node 0 link 1
[ 1.371841] bus: 00 [io 0x0000-0x8fff]
[ 1.371843] bus: 00 [io 0xc000-0xffff]
[ 1.371844] bus: 00 [io 0xa000-0xafff]
[ 1.371846] bus: 00 [mem 0xd0000000-0xdbffffff]
[ 1.371847] bus: 00 [mem 0x000a0000-0x000bffff]
[ 1.371848] bus: 00 [mem 0xdc400000-0xe7ffffff]
[ 1.371849] bus: 00 [mem 0xf0000000-0xffffffff]
[ 1.371851] bus: 00 [mem 0xa30000000-0xfcffffffff]
[ 1.371852] bus: [bus 80-ff] on node 1 link 1
[ 1.371854] bus: 80 [io 0xb000-0xbfff]
[ 1.371855] bus: 80 [io 0x9000-0x9fff]
[ 1.371856] bus: 80 [mem 0xdc000000-0xdc3fffff]
[ 1.371857] bus: 80 [mem 0xe8000000-0xefffffff]
[ 1.372036] ACPI: bus type PCI registered
[ 1.372326] PCI: Using configuration type 1 for base access
[ 1.372475] PCI: Using configuration type 1 for extended access
[ 1.390837] ACPI: Added _OSI(Module Device)
[ 1.391017] ACPI: Added _OSI(Processor Device)
[ 1.391165] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.391313] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.407617] ACPI: Interpreter enabled
[ 1.407822] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20140724/hwxface-580)
[ 1.408165] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S3_] (20140724/hwxface-580)
[ 1.408509] ACPI: (supports S0 S1 S4 S5)
[ 1.408658] ACPI: Using IOAPIC for interrupt routing
[ 1.408882] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 1.421221] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07])
[ 1.421452] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 1.421620] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 1.422134] acpi PNP0A03:00: ignoring host bridge window [mem
0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000ca000-0x000fffff])
[ 1.422481] PCI host bridge to bus 0000:00
[ 1.422630] pci_bus 0000:00: root bus resource [bus 00-07]
[ 1.422783] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.422934] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
[ 1.423075] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.423226] pci_bus 0000:00: root bus resource [mem 0xd4000000-0xdbffffff]
[ 1.423390] pci_scan_child_bus: pci_bus 0000:00: scanning bus
[ 1.423409] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[ 1.423681] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[ 1.423714] fixup_debug_start: pci 0000:00:01.0: calling
nvidia_force_enable_hpet+0x0/0xaa
[ 1.423716] HPET not enabled in BIOS. You might try hpet=force boot option
[ 1.424015] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[ 1.424024] pci 0000:00:01.1: reg 0x10: [io 0x0000-0x001f]
[ 1.424037] pci 0000:00:01.1: reg 0x20: [io 0xa000-0xa03f]
[ 1.424042] pci 0000:00:01.1: reg 0x24: [io 0xa040-0xa07f]
[ 1.424085] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 1.424090] pci_pme_active: pci 0000:00:01.1: PME# disabled
[ 1.424244] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[ 1.424252] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd4000fff]
[ 1.424287] pci 0000:00:02.0: supports D1 D2
[ 1.424298] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.424304] pci_pme_active: pci 0000:00:02.0: PME# disabled
[ 1.424396] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 1.424627] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[ 1.424636] pci 0000:00:02.1: reg 0x10: [mem 0xd4001000-0xd40010ff]
[ 1.424679] pci 0000:00:02.1: supports D1 D2
[ 1.424688] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.424692] pci_pme_active: pci 0000:00:02.1: PME# disabled
[ 1.424804] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 1.425037] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[ 1.425055] pci 0000:00:06.0: reg 0x20: [io 0x1400-0x140f]
[ 1.425063] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 1.425216] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 1.425382] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 1.425536] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 1.425862] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[ 1.425870] pci 0000:00:07.0: reg 0x10: [io 0x1440-0x1447]
[ 1.425875] pci 0000:00:07.0: reg 0x14: [io 0x1434-0x1437]
[ 1.425880] pci 0000:00:07.0: reg 0x18: [io 0x1438-0x143f]
[ 1.425884] pci 0000:00:07.0: reg 0x1c: [io 0x1430-0x1433]
[ 1.425889] pci 0000:00:07.0: reg 0x20: [io 0x1410-0x141f]
[ 1.425894] pci 0000:00:07.0: reg 0x24: [mem 0xd4002000-0xd4002fff]
[ 1.426113] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[ 1.426120] pci 0000:00:08.0: reg 0x10: [io 0x1458-0x145f]
[ 1.426125] pci 0000:00:08.0: reg 0x14: [io 0x144c-0x144f]
[ 1.426130] pci 0000:00:08.0: reg 0x18: [io 0x1450-0x1457]
[ 1.426134] pci 0000:00:08.0: reg 0x1c: [io 0x1448-0x144b]
[ 1.426139] pci 0000:00:08.0: reg 0x20: [io 0x1420-0x142f]
[ 1.426143] pci 0000:00:08.0: reg 0x24: [mem 0xd4003000-0xd4003fff]
[ 1.426345] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401
[ 1.426437] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 1.426661] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000
[ 1.426669] pci 0000:00:0a.0: reg 0x10: [mem 0xd4004000-0xd4004fff]
[ 1.426674] pci 0000:00:0a.0: reg 0x14: [io 0x1460-0x1467]
[ 1.426707] pci 0000:00:0a.0: supports D1 D2
[ 1.426709] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.426720] pci_pme_active: pci 0000:00:0a.0: PME# disabled
[ 1.426845] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 1.427069] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[ 1.427104] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.427109] pci_pme_active: pci 0000:00:0b.0: PME# disabled
[ 1.427266] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[ 1.427297] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.427303] pci_pme_active: pci 0000:00:0c.0: PME# disabled
[ 1.427462] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[ 1.427495] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.427498] pci_pme_active: pci 0000:00:0d.0: PME# disabled
[ 1.427659] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[ 1.427691] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.427694] pci_pme_active: pci 0000:00:0e.0: PME# disabled
[ 1.427853] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 1.427862] fixup_debug_start: pci 0000:00:18.0: calling
quirk_mmio_always_on+0x0/0x5
[ 1.428026] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 1.428031] fixup_debug_start: pci 0000:00:18.1: calling
quirk_mmio_always_on+0x0/0x5
[ 1.428179] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 1.428184] fixup_debug_start: pci 0000:00:18.2: calling
quirk_mmio_always_on+0x0/0x5
[ 1.428328] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 1.428333] fixup_debug_start: pci 0000:00:18.3: calling
quirk_mmio_always_on+0x0/0x5
[ 1.428472] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 1.428477] fixup_debug_start: pci 0000:00:18.4: calling
quirk_mmio_always_on+0x0/0x5
[ 1.428617] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[ 1.428622] fixup_debug_start: pci 0000:00:19.0: calling
quirk_mmio_always_on+0x0/0x5
[ 1.428772] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[ 1.428777] fixup_debug_start: pci 0000:00:19.1: calling
quirk_mmio_always_on+0x0/0x5
[ 1.428913] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[ 1.428917] fixup_debug_start: pci 0000:00:19.2: calling
quirk_mmio_always_on+0x0/0x5
[ 1.429057] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[ 1.429062] fixup_debug_start: pci 0000:00:19.3: calling
quirk_mmio_always_on+0x0/0x5
[ 1.429208] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[ 1.429213] fixup_debug_start: pci 0000:00:19.4: calling
quirk_mmio_always_on+0x0/0x5
[ 1.429360] pci 0000:00:1a.0: [1022:1200] type 00 class 0x060000
[ 1.429366] fixup_debug_start: pci 0000:00:1a.0: calling
quirk_mmio_always_on+0x0/0x5
[ 1.429515] pci 0000:00:1a.1: [1022:1201] type 00 class 0x060000
[ 1.429520] fixup_debug_start: pci 0000:00:1a.1: calling
quirk_mmio_always_on+0x0/0x5
[ 1.429658] pci 0000:00:1a.2: [1022:1202] type 00 class 0x060000
[ 1.429663] fixup_debug_start: pci 0000:00:1a.2: calling
quirk_mmio_always_on+0x0/0x5
[ 1.429803] pci 0000:00:1a.3: [1022:1203] type 00 class 0x060000
[ 1.429808] fixup_debug_start: pci 0000:00:1a.3: calling
quirk_mmio_always_on+0x0/0x5
[ 1.429950] pci 0000:00:1a.4: [1022:1204] type 00 class 0x060000
[ 1.429955] fixup_debug_start: pci 0000:00:1a.4: calling
quirk_mmio_always_on+0x0/0x5
[ 1.430099] pci 0000:00:1b.0: [1022:1200] type 00 class 0x060000
[ 1.430104] fixup_debug_start: pci 0000:00:1b.0: calling
quirk_mmio_always_on+0x0/0x5
[ 1.430261] pci 0000:00:1b.1: [1022:1201] type 00 class 0x060000
[ 1.430266] fixup_debug_start: pci 0000:00:1b.1: calling
quirk_mmio_always_on+0x0/0x5
[ 1.430403] pci 0000:00:1b.2: [1022:1202] type 00 class 0x060000
[ 1.430408] fixup_debug_start: pci 0000:00:1b.2: calling
quirk_mmio_always_on+0x0/0x5
[ 1.430548] pci 0000:00:1b.3: [1022:1203] type 00 class 0x060000
[ 1.430553] fixup_debug_start: pci 0000:00:1b.3: calling
quirk_mmio_always_on+0x0/0x5
[ 1.430700] pci 0000:00:1b.4: [1022:1204] type 00 class 0x060000
[ 1.430705] fixup_debug_start: pci 0000:00:1b.4: calling
quirk_mmio_always_on+0x0/0x5
[ 1.430846] pci 0000:00:1c.0: [1022:1200] type 00 class 0x060000
[ 1.430852] fixup_debug_start: pci 0000:00:1c.0: calling
quirk_mmio_always_on+0x0/0x5
[ 1.431013] pci 0000:00:1c.1: [1022:1201] type 00 class 0x060000
[ 1.431018] fixup_debug_start: pci 0000:00:1c.1: calling
quirk_mmio_always_on+0x0/0x5
[ 1.431164] pci 0000:00:1c.2: [1022:1202] type 00 class 0x060000
[ 1.431169] fixup_debug_start: pci 0000:00:1c.2: calling
quirk_mmio_always_on+0x0/0x5
[ 1.431317] pci 0000:00:1c.3: [1022:1203] type 00 class 0x060000
[ 1.431322] fixup_debug_start: pci 0000:00:1c.3: calling
quirk_mmio_always_on+0x0/0x5
[ 1.431468] pci 0000:00:1c.4: [1022:1204] type 00 class 0x060000
[ 1.431473] fixup_debug_start: pci 0000:00:1c.4: calling
quirk_mmio_always_on+0x0/0x5
[ 1.431624] pci 0000:00:1d.0: [1022:1200] type 00 class 0x060000
[ 1.431629] fixup_debug_start: pci 0000:00:1d.0: calling
quirk_mmio_always_on+0x0/0x5
[ 1.431807] pci 0000:00:1d.1: [1022:1201] type 00 class 0x060000
[ 1.431812] fixup_debug_start: pci 0000:00:1d.1: calling
quirk_mmio_always_on+0x0/0x5
[ 1.431968] pci 0000:00:1d.2: [1022:1202] type 00 class 0x060000
[ 1.431973] fixup_debug_start: pci 0000:00:1d.2: calling
quirk_mmio_always_on+0x0/0x5
[ 1.432120] pci 0000:00:1d.3: [1022:1203] type 00 class 0x060000
[ 1.432125] fixup_debug_start: pci 0000:00:1d.3: calling
quirk_mmio_always_on+0x0/0x5
[ 1.432272] pci 0000:00:1d.4: [1022:1204] type 00 class 0x060000
[ 1.432277] fixup_debug_start: pci 0000:00:1d.4: calling
quirk_mmio_always_on+0x0/0x5
[ 1.432417] pci 0000:00:1e.0: [1022:1200] type 00 class 0x060000
[ 1.432422] fixup_debug_start: pci 0000:00:1e.0: calling
quirk_mmio_always_on+0x0/0x5
[ 1.432592] pci 0000:00:1e.1: [1022:1201] type 00 class 0x060000
[ 1.432597] fixup_debug_start: pci 0000:00:1e.1: calling
quirk_mmio_always_on+0x0/0x5
[ 1.432756] pci 0000:00:1e.2: [1022:1202] type 00 class 0x060000
[ 1.432761] fixup_debug_start: pci 0000:00:1e.2: calling
quirk_mmio_always_on+0x0/0x5
[ 1.432913] pci 0000:00:1e.3: [1022:1203] type 00 class 0x060000
[ 1.432918] fixup_debug_start: pci 0000:00:1e.3: calling
quirk_mmio_always_on+0x0/0x5
[ 1.433072] pci 0000:00:1e.4: [1022:1204] type 00 class 0x060000
[ 1.433077] fixup_debug_start: pci 0000:00:1e.4: calling
quirk_mmio_always_on+0x0/0x5
[ 1.433225] pci 0000:00:1f.0: [1022:1200] type 00 class 0x060000
[ 1.433230] fixup_debug_start: pci 0000:00:1f.0: calling
quirk_mmio_always_on+0x0/0x5
[ 1.433424] pci 0000:00:1f.1: [1022:1201] type 00 class 0x060000
[ 1.433429] fixup_debug_start: pci 0000:00:1f.1: calling
quirk_mmio_always_on+0x0/0x5
[ 1.433572] pci 0000:00:1f.2: [1022:1202] type 00 class 0x060000
[ 1.433577] fixup_debug_start: pci 0000:00:1f.2: calling
quirk_mmio_always_on+0x0/0x5
[ 1.433752] pci 0000:00:1f.3: [1022:1203] type 00 class 0x060000
[ 1.433757] fixup_debug_start: pci 0000:00:1f.3: calling
quirk_mmio_always_on+0x0/0x5
[ 1.433897] pci 0000:00:1f.4: [1022:1204] type 00 class 0x060000
[ 1.433902] fixup_debug_start: pci 0000:00:1f.4: calling
quirk_mmio_always_on+0x0/0x5
[ 1.434048] pci_scan_child_bus: pci_bus 0000:00: fixups for bus
[ 1.434053] pci_scan_bridge: pci 0000:00:09.0: scanning [bus 01-01] behind
bridge, pass 0
[ 1.434097] pci_scan_child_bus: pci_bus 0000:01: scanning bus
[ 1.434114] pci 0000:01:06.0: [8086:1076] type 00 class 0x020000
[ 1.434128] pci 0000:01:06.0: reg 0x10: [mem 0xd4120000-0xd413ffff]
[ 1.434136] pci 0000:01:06.0: reg 0x14: [mem 0xd4100000-0xd411ffff]
[ 1.434145] pci 0000:01:06.0: reg 0x18: [io 0x2080-0x20bf]
[ 1.434190] pci 0000:01:06.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 1.434214] pci 0000:01:06.0: PME# supported from D0 D3hot D3cold
[ 1.434227] pci_pme_active: pci 0000:01:06.0: PME# disabled
[ 1.434320] pci 0000:01:09.0: [18ca:0020] type 00 class 0x030000
[ 1.434332] pci 0000:01:09.0: reg 0x10: [mem 0xd8000000-0xdbffffff pref]
[ 1.434338] pci 0000:01:09.0: reg 0x14: [mem 0xd4140000-0xd417ffff]
[ 1.434345] pci 0000:01:09.0: reg 0x18: [io 0x2000-0x207f]
[ 1.434380] pci 0000:01:09.0: supports D1 D2
[ 1.434505] pci_scan_child_bus: pci_bus 0000:01: fixups for bus
[ 1.434507] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
[ 1.434687] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
[ 1.434693] pci 0000:00:09.0: bridge window [mem 0xd4100000-0xd41fffff]
[ 1.434697] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdbffffff
pref]
[ 1.434700] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 1.434702] pci 0000:00:09.0: bridge window [io 0x0d00-0x3fff]
(subtractive decode)
[ 1.434705] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 1.434708] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xdbffffff]
(subtractive decode)
[ 1.434711] pci_scan_child_bus: pci_bus 0000:01: bus scan returning with
max=01
[ 1.434716] pci_scan_bridge: pci 0000:00:0b.0: scanning [bus 02-02] behind
bridge, pass 0
[ 1.434782] pci_scan_child_bus: pci_bus 0000:02: scanning bus
[ 1.434785] pci_scan_child_bus: pci_bus 0000:02: fixups for bus
[ 1.434787] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 1.434941] pci_scan_child_bus: pci_bus 0000:02: bus scan returning with
max=02
[ 1.434964] pci_scan_bridge: pci 0000:00:0c.0: scanning [bus 03-03] behind
bridge, pass 0
[ 1.435043] pci_scan_child_bus: pci_bus 0000:03: scanning bus
[ 1.435046] pci_scan_child_bus: pci_bus 0000:03: fixups for bus
[ 1.435049] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 1.435201] pci_scan_child_bus: pci_bus 0000:03: bus scan returning with
max=03
[ 1.435208] pci_scan_bridge: pci 0000:00:0d.0: scanning [bus 05-05] behind
bridge, pass 0
[ 1.435269] pci_scan_child_bus: pci_bus 0000:05: scanning bus
[ 1.435273] pci_scan_child_bus: pci_bus 0000:05: fixups for bus
[ 1.435275] pci 0000:00:0d.0: PCI bridge to [bus 05]
[ 1.435430] pci_scan_child_bus: pci_bus 0000:05: bus scan returning with
max=05
[ 1.435434] pci_scan_bridge: pci 0000:00:0e.0: scanning [bus 0a-0a] behind
bridge, pass 0
[ 1.435503] pci_bus 0000:0a: busn_res: can not insert [bus 0a] under [bus
00-07] (conflicts with (null) [bus 00-07])
[ 1.435505] pci_scan_child_bus: pci_bus 0000:0a: scanning bus
[ 1.435520] pci 0000:0a:00.0: [1000:0646] type 00 class 0x0c0400
[ 1.435531] pci 0000:0a:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 1.435541] pci 0000:0a:00.0: reg 0x14: [mem 0xd4210000-0xd4213fff 64bit]
[ 1.435560] pci 0000:0a:00.0: reg 0x1c: [mem 0xd4200000-0xd420ffff 64bit]
[ 1.435572] pci 0000:0a:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
[ 1.435628] pci 0000:0a:00.0: supports D1 D2
[ 1.435720] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 1.435985] pci_scan_child_bus: pci_bus 0000:0a: fixups for bus
[ 1.435988] pci 0000:00:0e.0: PCI bridge to [bus 0a]
[ 1.436139] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff]
[ 1.436142] pci 0000:00:0e.0: bridge window [mem 0xd4200000-0xd42fffff]
[ 1.436146] pci_scan_child_bus: pci_bus 0000:0a: bus scan returning with
max=0a
[ 1.436151] pci_scan_bridge: pci 0000:00:09.0: scanning [bus 01-01] behind
bridge, pass 1
[ 1.436164] pci_scan_bridge: pci 0000:00:0b.0: scanning [bus 02-02] behind
bridge, pass 1
[ 1.436175] pci_scan_bridge: pci 0000:00:0c.0: scanning [bus 03-03] behind
bridge, pass 1
[ 1.436183] pci_scan_bridge: pci 0000:00:0d.0: scanning [bus 05-05] behind
bridge, pass 1
[ 1.436187] pci_scan_bridge: pci 0000:00:0e.0: scanning [bus 0a-0a] behind
bridge, pass 1
[ 1.436191] pci_scan_child_bus: pci_bus 0000:00: bus scan returning with
max=0a
[ 1.436196] pci_bus 0000:00: on NUMA node 0
[ 1.437370] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
[ 1.437960] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
[ 1.438472] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
[ 1.438994] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled.
[ 1.439541] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
[ 1.440074] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled.
[ 1.440610] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
[ 1.441122] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0
[ 1.441648] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0
[ 1.442157] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 1.442697] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
[ 1.443232] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
[ 1.443784] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
[ 1.444315] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled.
[ 1.444875] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 1.445586] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
[ 1.445736] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 1.445899] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 1.446061] acpi PNP0A03:01: [Firmware Bug]: no _PXM; falling back to node 1
from hardware (may be inconsistent with ACPI node numbers)
[ 1.446794] acpi PNP0A03:01: ignoring host bridge window [mem
0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000ca000-0x000fffff])
[ 1.447119] PCI host bridge to bus 0000:80
[ 1.447266] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 1.447418] pci_bus 0000:80: root bus resource [io 0xb000-0xffff]
[ 1.447563] pci_bus 0000:80: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.447705] pci_bus 0000:80: root bus resource [mem 0xdc000000-0xdc3fffff]
[ 1.447857] pci_scan_child_bus: pci_bus 0000:80: scanning bus
[ 1.447875] pci 0000:80:00.0: [10de:005e] type 00 class 0x058000
[ 1.448064] pci 0000:80:01.0: [10de:00d3] type 00 class 0x058000
[ 1.448198] pci 0000:80:07.0: [10de:0054] type 00 class 0x010185
[ 1.448207] pci 0000:80:07.0: reg 0x10: [io 0xb030-0xb037]
[ 1.448212] pci 0000:80:07.0: reg 0x14: [io 0xb024-0xb027]
[ 1.448217] pci 0000:80:07.0: reg 0x18: [io 0xb028-0xb02f]
[ 1.448222] pci 0000:80:07.0: reg 0x1c: [io 0xb020-0xb023]
[ 1.448227] pci 0000:80:07.0: reg 0x20: [io 0xb000-0xb00f]
[ 1.448232] pci 0000:80:07.0: reg 0x24: [mem 0xdc000000-0xdc000fff]
[ 1.448384] pci 0000:80:08.0: [10de:0055] type 00 class 0x010185
[ 1.448393] pci 0000:80:08.0: reg 0x10: [io 0xb048-0xb04f]
[ 1.448397] pci 0000:80:08.0: reg 0x14: [io 0xb03c-0xb03f]
[ 1.448402] pci 0000:80:08.0: reg 0x18: [io 0xb040-0xb047]
[ 1.448407] pci 0000:80:08.0: reg 0x1c: [io 0xb038-0xb03b]
[ 1.448412] pci 0000:80:08.0: reg 0x20: [io 0xb010-0xb01f]
[ 1.448417] pci 0000:80:08.0: reg 0x24: [mem 0xdc001000-0xdc001fff]
[ 1.448553] pci 0000:80:0a.0: [10de:0057] type 00 class 0x068000
[ 1.448562] pci 0000:80:0a.0: reg 0x10: [mem 0xdc002000-0xdc002fff]
[ 1.448567] pci 0000:80:0a.0: reg 0x14: [io 0xb050-0xb057]
[ 1.448594] pci 0000:80:0a.0: supports D1 D2
[ 1.448606] pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.448623] pci_pme_active: pci 0000:80:0a.0: PME# disabled
[ 1.448663] pci 0000:80:0a.0: System wakeup disabled by ACPI
[ 1.448914] pci 0000:80:0b.0: [10de:005d] type 01 class 0x060400
[ 1.448955] pci 0000:80:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.448958] pci_pme_active: pci 0000:80:0b.0: PME# disabled
[ 1.449083] pci 0000:80:0c.0: [10de:005d] type 01 class 0x060400
[ 1.449123] pci 0000:80:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.449132] pci_pme_active: pci 0000:80:0c.0: PME# disabled
[ 1.449253] pci 0000:80:0d.0: [10de:005d] type 01 class 0x060400
[ 1.449300] pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.449303] pci_pme_active: pci 0000:80:0d.0: PME# disabled
[ 1.449415] pci 0000:80:0e.0: [10de:005d] type 01 class 0x060400
[ 1.449455] pci 0000:80:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.449459] pci_pme_active: pci 0000:80:0e.0: PME# disabled
[ 1.449587] pci_scan_child_bus: pci_bus 0000:80: fixups for bus
[ 1.449591] pci_scan_bridge: pci 0000:80:0b.0: scanning [bus 81-85] behind
bridge, pass 0
[ 1.449641] pci_scan_child_bus: pci_bus 0000:81: scanning bus
[ 1.449644] pci_scan_child_bus: pci_bus 0000:81: fixups for bus
[ 1.449647] pci 0000:80:0b.0: PCI bridge to [bus 81-85]
[ 1.449793] pci_scan_child_bus: pci_bus 0000:81: bus scan returning with
max=81
[ 1.449799] pci_scan_bridge: pci 0000:80:0c.0: scanning [bus 86-8a] behind
bridge, pass 0
[ 1.449849] pci_scan_child_bus: pci_bus 0000:86: scanning bus
[ 1.449852] pci_scan_child_bus: pci_bus 0000:86: fixups for bus
[ 1.449855] pci 0000:80:0c.0: PCI bridge to [bus 86-8a]
[ 1.450007] pci_scan_child_bus: pci_bus 0000:86: bus scan returning with
max=86
[ 1.450011] pci_scan_bridge: pci 0000:80:0d.0: scanning [bus 8b-8f] behind
bridge, pass 0
[ 1.450090] pci_scan_child_bus: pci_bus 0000:8b: scanning bus
[ 1.450093] pci_scan_child_bus: pci_bus 0000:8b: fixups for bus
[ 1.450095] pci 0000:80:0d.0: PCI bridge to [bus 8b-8f]
[ 1.450239] pci_scan_child_bus: pci_bus 0000:8b: bus scan returning with
max=8b
[ 1.450253] pci_scan_bridge: pci 0000:80:0e.0: scanning [bus 90-94] behind
bridge, pass 0
[ 1.450332] pci_scan_child_bus: pci_bus 0000:90: scanning bus
[ 1.450335] pci_scan_child_bus: pci_bus 0000:90: fixups for bus
[ 1.450337] pci 0000:80:0e.0: PCI bridge to [bus 90-94]
[ 1.450479] pci_scan_child_bus: pci_bus 0000:90: bus scan returning with
max=90
[ 1.450502] pci_scan_bridge: pci 0000:80:0b.0: scanning [bus 81-85] behind
bridge, pass 1
[ 1.450517] pci_scan_bridge: pci 0000:80:0c.0: scanning [bus 86-8a] behind
bridge, pass 1
[ 1.450530] pci_scan_bridge: pci 0000:80:0d.0: scanning [bus 8b-8f] behind
bridge, pass 1
[ 1.450551] pci_scan_bridge: pci 0000:80:0e.0: scanning [bus 90-94] behind
bridge, pass 1
[ 1.450554] pci_scan_child_bus: pci_bus 0000:80: bus scan returning with
max=94
[ 1.450565] pci_bus 0000:80: on NUMA node 1
[ 1.451091] vgaarb: device added:
PCI:0000:01:09.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.451251] vgaarb: loaded
[ 1.451396] vgaarb: bridge control possible 0000:01:09.0
[ 1.452217] SCSI subsystem initialized
[ 1.452565] libata version 3.00 loaded.
[ 1.452583] ACPI: bus type USB registered
[ 1.452805] usbcore: registered new interface driver usbfs
[ 1.452986] usbcore: registered new interface driver hub
[ 1.453190] usbcore: registered new device driver usb
[ 1.453437] PCI: Using ACPI for IRQ routing
[ 1.453589] PCI: pci_cache_line_size set to 64 bytes
[ 1.453603] pci 0000:00:01.1: can't claim BAR 4 [io 0xa000-0xa03f]: no
compatible bridge window
[ 1.453863] pci 0000:00:01.1: can't claim BAR 5 [io 0xa040-0xa07f]: no
compatible bridge window
[ 1.454245] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
[ 1.454250] e820: reserve RAM buffer [mem 0x7ffe0000-0x7fffffff]
[ 1.454252] e820: reserve RAM buffer [mem 0xcfc00000-0xcfffffff]
[ 1.455022] Switched to clocksource refined-jiffies
[ 1.463509] pnp: PnP ACPI init
[ 1.464248] system 00:00: [mem 0xff800000-0xffffffff] could not be reserved
[ 1.464444] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.464625] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.464826] system 00:00: [mem 0xfefff000-0xfeffffff] has been reserved
[ 1.465010] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.465583] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.466059] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.466543] pnp 00:03: [dma 2]
[ 1.466610] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.467155] pnp 00:04: [dma 1]
[ 1.467348] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 1.467425] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 1.467509] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.467986] system 00:07: [io 0x8000-0x807f] could not be reserved
[ 1.468169] system 00:07: [io 0x8080-0x80ff] has been reserved
[ 1.468348] system 00:07: [io 0x8400-0x847f] has been reserved
[ 1.468526] system 00:07: [io 0x8480-0x84ff] has been reserved
[ 1.468706] system 00:07: [io 0x8800-0x887f] has been reserved
[ 1.468884] system 00:07: [io 0x8880-0x88ff] has been reserved
[ 1.469071] system 00:07: [io 0xa000-0xa03f] has been reserved
[ 1.469262] system 00:07: [io 0xa040-0xa07f] has been reserved
[ 1.469446] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.469490] pnp 00:08: disabling [io 0x0010-0x001f] because it overlaps
0000:00:01.1 BAR 0 [io 0x0000-0x001f]
[ 1.469811] pnp 00:08: disabling [io 0x0010-0x001f disabled] because it
overlaps 0000:00:01.1 BAR 4 [io 0x0000-0x003f]
[ 1.470114] pnp 00:08: disabling [io 0x0022-0x003f] because it overlaps
0000:00:01.1 BAR 4 [io 0x0000-0x003f]
[ 1.470427] pnp 00:08: disabling [io 0x0010-0x001f disabled] because it
overlaps 0000:00:01.1 BAR 5 [io 0x0000-0x003f]
[ 1.470730] pnp 00:08: disabling [io 0x0022-0x003f disabled] because it
overlaps 0000:00:01.1 BAR 5 [io 0x0000-0x003f]
[ 1.474932] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.475112] system 00:08: [io 0x0400-0x045e] has been reserved
[ 1.475300] system 00:08: [io 0x9000-0x907f] has been reserved
[ 1.475486] system 00:08: [io 0x9080-0x90ff] has been reserved
[ 1.475659] system 00:08: [io 0x9200-0x927f] has been reserved
[ 1.475847] system 00:08: [io 0x9280-0x92ff] has been reserved
[ 1.476015] system 00:08: [io 0x9400-0x947f] has been reserved
[ 1.476204] system 00:08: [io 0x9480-0x94ff] has been reserved
[ 1.476382] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.476471] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.477110] pnp: PnP ACPI: found 10 devices
[ 1.485776] Switched to clocksource acpi_pm
[ 1.486113] pci 0000:00:01.1: BAR 4: assigned [io 0x1000-0x103f]
[ 1.486300] pci 0000:00:01.1: BAR 5: assigned [io 0x1040-0x107f]
[ 1.486477] pci 0000:00:01.1: BAR 0: assigned [io 0x1080-0x109f]
[ 1.486664] pci 0000:01:06.0: BAR 6: assigned [mem 0xd4180000-0xd419ffff
pref]
[ 1.486860] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 1.487045] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
[ 1.487224] pci 0000:00:09.0: bridge window [mem 0xd4100000-0xd41fffff]
[ 1.487403] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdbffffff
pref]
[ 1.487588] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 1.487772] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 1.487950] pci 0000:00:0d.0: PCI bridge to [bus 05]
[ 1.488133] pci 0000:0a:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[ 1.488322] pci 0000:0a:00.0: BAR 6: failed to assign [mem size 0x00100000
pref]
[ 1.488507] pci 0000:00:0e.0: PCI bridge to [bus 0a]
[ 1.488678] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff]
[ 1.488864] pci 0000:00:0e.0: bridge window [mem 0xd4200000-0xd42fffff]
[ 1.489055] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.489057] pci_bus 0000:00: resource 5 [io 0x0d00-0x3fff]
[ 1.489059] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.489062] pci_bus 0000:00: resource 7 [mem 0xd4000000-0xdbffffff]
[ 1.489065] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.489067] pci_bus 0000:01: resource 1 [mem 0xd4100000-0xd41fffff]
[ 1.489069] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdbffffff pref]
[ 1.489071] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 1.489073] pci_bus 0000:01: resource 5 [io 0x0d00-0x3fff]
[ 1.489075] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.489078] pci_bus 0000:01: resource 7 [mem 0xd4000000-0xdbffffff]
[ 1.489081] pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff]
[ 1.489083] pci_bus 0000:0a: resource 1 [mem 0xd4200000-0xd42fffff]
[ 1.489108] pci 0000:80:0b.0: PCI bridge to [bus 81-85]
[ 1.489318] pci 0000:80:0c.0: PCI bridge to [bus 86-8a]
[ 1.489508] pci 0000:80:0d.0: PCI bridge to [bus 8b-8f]
[ 1.489687] pci 0000:80:0e.0: PCI bridge to [bus 90-94]
[ 1.490061] pci_bus 0000:80: resource 4 [io 0xb000-0xffff]
[ 1.490063] pci_bus 0000:80: resource 5 [mem 0x000a0000-0x000bffff]
[ 1.490065] pci_bus 0000:80: resource 6 [mem 0xdc000000-0xdc3fffff]
[ 1.490671] NET: Registered protocol family 2
[ 1.492089] TCP established hash table entries: 524288 (order: 10, 4194304
bytes)
[ 1.495368] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.496277] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.496576] TCP: reno registered
[ 1.496898] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[ 1.498190] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[ 1.499766] NET: Registered protocol family 1
[ 1.500522] RPC: Registered named UNIX socket transport module.
[ 1.500697] RPC: Registered udp transport module.
[ 1.500868] RPC: Registered tcp transport module.
[ 1.501040] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.501245] fixup_debug_start: pci 0000:00:00.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.501273] fixup_debug_start: pci 0000:00:01.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.501281] fixup_debug_start: pci 0000:00:01.1: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.501290] fixup_debug_start: pci 0000:00:02.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.501300] fixup_debug_start: pci 0000:00:02.0: calling
quirk_usb_early_handoff+0x0/0x660
[ 1.501952] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[ 1.757865] fixup_debug_start: pci 0000:00:02.1: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.757888] fixup_debug_start: pci 0000:00:02.1: calling
quirk_usb_early_handoff+0x0/0x660
[ 1.758321] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 1.758673] fixup_debug_start: pci 0000:00:06.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.758683] fixup_debug_start: pci 0000:00:07.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.758692] fixup_debug_start: pci 0000:00:08.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.758701] fixup_debug_start: pci 0000:00:09.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.758709] fixup_debug_start: pci 0000:00:0a.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.758718] fixup_debug_start: pci 0000:00:0b.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.758799] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.758977] fixup_debug_start: pci 0000:00:0b.0: calling
quirk_nvidia_ck804_msi_ht_cap+0x0/0x66
[ 1.758988] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 1.759165] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.759351] fixup_debug_start: pci 0000:00:0b.0: calling
quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d
[ 1.759359] fixup_debug_start: pci 0000:00:0c.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.759412] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.759587] fixup_debug_start: pci 0000:00:0c.0: calling
quirk_nvidia_ck804_msi_ht_cap+0x0/0x66
[ 1.759603] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 1.759783] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.759956] fixup_debug_start: pci 0000:00:0c.0: calling
quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d
[ 1.759972] fixup_debug_start: pci 0000:00:0d.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.760038] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.760213] fixup_debug_start: pci 0000:00:0d.0: calling
quirk_nvidia_ck804_msi_ht_cap+0x0/0x66
[ 1.760219] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 1.760400] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.760574] fixup_debug_start: pci 0000:00:0d.0: calling
quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d
[ 1.760591] fixup_debug_start: pci 0000:00:0e.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.760662] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.760837] fixup_debug_start: pci 0000:00:0e.0: calling
quirk_nvidia_ck804_msi_ht_cap+0x0/0x66
[ 1.760843] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 1.761015] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.761190] fixup_debug_start: pci 0000:00:0e.0: calling
quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d
[ 1.761211] fixup_debug_start: pci 0000:00:18.0: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761219] fixup_debug_start: pci 0000:00:18.1: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761227] fixup_debug_start: pci 0000:00:18.2: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761234] fixup_debug_start: pci 0000:00:18.3: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761241] fixup_debug_start: pci 0000:00:18.4: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761248] fixup_debug_start: pci 0000:00:19.0: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761256] fixup_debug_start: pci 0000:00:19.1: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761263] fixup_debug_start: pci 0000:00:19.2: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761270] fixup_debug_start: pci 0000:00:19.3: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761277] fixup_debug_start: pci 0000:00:19.4: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761284] fixup_debug_start: pci 0000:00:1a.0: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761291] fixup_debug_start: pci 0000:00:1a.1: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761298] fixup_debug_start: pci 0000:00:1a.2: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761305] fixup_debug_start: pci 0000:00:1a.3: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761312] fixup_debug_start: pci 0000:00:1a.4: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761319] fixup_debug_start: pci 0000:00:1b.0: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761327] fixup_debug_start: pci 0000:00:1b.1: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761334] fixup_debug_start: pci 0000:00:1b.2: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761341] fixup_debug_start: pci 0000:00:1b.3: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761348] fixup_debug_start: pci 0000:00:1b.4: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761355] fixup_debug_start: pci 0000:00:1c.0: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761362] fixup_debug_start: pci 0000:00:1c.1: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761370] fixup_debug_start: pci 0000:00:1c.2: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761377] fixup_debug_start: pci 0000:00:1c.3: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761384] fixup_debug_start: pci 0000:00:1c.4: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761392] fixup_debug_start: pci 0000:00:1d.0: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761399] fixup_debug_start: pci 0000:00:1d.1: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761406] fixup_debug_start: pci 0000:00:1d.2: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761413] fixup_debug_start: pci 0000:00:1d.3: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761420] fixup_debug_start: pci 0000:00:1d.4: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761427] fixup_debug_start: pci 0000:00:1e.0: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761435] fixup_debug_start: pci 0000:00:1e.1: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761442] fixup_debug_start: pci 0000:00:1e.2: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761449] fixup_debug_start: pci 0000:00:1e.3: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761457] fixup_debug_start: pci 0000:00:1e.4: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761652] fixup_debug_start: pci 0000:00:1f.0: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761659] fixup_debug_start: pci 0000:00:1f.1: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761666] fixup_debug_start: pci 0000:00:1f.2: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761673] fixup_debug_start: pci 0000:00:1f.3: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761680] fixup_debug_start: pci 0000:00:1f.4: calling
quirk_amd_nb_node+0x0/0x74
[ 1.761688] fixup_debug_start: pci 0000:01:06.0: calling
quirk_e100_interrupt+0x0/0x143
[ 1.761700] fixup_debug_start: pci 0000:01:09.0: calling
pci_fixup_video+0x0/0x11b
[ 1.761705] pci 0000:01:09.0: Boot video device
[ 1.761716] fixup_debug_start: pci 0000:80:00.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.761750] fixup_debug_start: pci 0000:80:01.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.761757] fixup_debug_start: pci 0000:80:07.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.761766] fixup_debug_start: pci 0000:80:08.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.761774] fixup_debug_start: pci 0000:80:0a.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.761783] fixup_debug_start: pci 0000:80:0b.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.761841] pci 0000:80:00.0: Found enabled HT MSI Mapping
[ 1.762015] fixup_debug_start: pci 0000:80:0b.0: calling
quirk_nvidia_ck804_msi_ht_cap+0x0/0x66
[ 1.762030] pci 0000:80:0b.0: Found disabled HT MSI Mapping
[ 1.762200] pci 0000:80:00.0: Found enabled HT MSI Mapping
[ 1.762386] fixup_debug_start: pci 0000:80:0b.0: calling
quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d
[ 1.762393] fixup_debug_start: pci 0000:80:0c.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.762428] pci 0000:80:00.0: Found enabled HT MSI Mapping
[ 1.762603] fixup_debug_start: pci 0000:80:0c.0: calling
quirk_nvidia_ck804_msi_ht_cap+0x0/0x66
[ 1.762618] pci 0000:80:0c.0: Found disabled HT MSI Mapping
[ 1.762788] pci 0000:80:00.0: Found enabled HT MSI Mapping
[ 1.762963] fixup_debug_start: pci 0000:80:0c.0: calling
quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d
[ 1.762980] fixup_debug_start: pci 0000:80:0d.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.763019] pci 0000:80:00.0: Found enabled HT MSI Mapping
[ 1.763194] fixup_debug_start: pci 0000:80:0d.0: calling
quirk_nvidia_ck804_msi_ht_cap+0x0/0x66
[ 1.763209] pci 0000:80:0d.0: Found disabled HT MSI Mapping
[ 1.763389] pci 0000:80:00.0: Found enabled HT MSI Mapping
[ 1.763555] fixup_debug_start: pci 0000:80:0d.0: calling
quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d
[ 1.763572] fixup_debug_start: pci 0000:80:0e.0: calling
nv_msi_ht_cap_quirk_leaf+0x0/0x27
[ 1.763616] pci 0000:80:00.0: Found enabled HT MSI Mapping
[ 1.763790] fixup_debug_start: pci 0000:80:0e.0: calling
quirk_nvidia_ck804_msi_ht_cap+0x0/0x66
[ 1.763805] pci 0000:80:0e.0: Found disabled HT MSI Mapping
[ 1.763979] pci 0000:80:00.0: Found enabled HT MSI Mapping
[ 1.764154] fixup_debug_start: pci 0000:80:0e.0: calling
quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d
[ 1.764167] PCI: CLS 64 bytes, default 64
[ 1.767552] PCI-DMA: Disabling AGP.
[ 1.769063] PCI-DMA: aperture base @ d0000000 size 65536 KB
[ 1.769237] init_memory_mapping: [mem 0xd0000000-0xd3ffffff]
[ 1.769411] [mem 0xd0000000-0xd3ffffff] page 2M
[ 1.769428] PCI-DMA: using GART IOMMU.
[ 1.769793] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.779877] Simple Boot Flag at 0x37 set to 0x80
[ 1.783190] LVT offset 1 assigned for vector 0x400
[ 1.783438] IBS: LVT offset 1 assigned
[ 1.783700] perf: AMD IBS detected (0x00000007)
[ 1.789228] futex hash table entries: 8192 (order: 7, 524288 bytes)
[ 1.791102] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.795044] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 1.795483] msgmni has been set to 32768
[ 1.796156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
254)
[ 1.796325] io scheduler noop registered
[ 1.796483] io scheduler deadline registered
[ 1.796804] io scheduler cfq registered (default)
[ 1.797260] __pci_set_master: pcieport 0000:00:0b.0: enabling bus mastering
[ 1.797295] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 1.797392] __pci_set_master: pcieport 0000:00:0c.0: enabling bus mastering
[ 1.797404] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
[ 1.797667] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
[ 1.797754] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X
[ 1.797861] __pci_set_master: pcieport 0000:80:0b.0: enabling bus mastering
[ 1.797901] pcieport 0000:80:0b.0: irq 28 for MSI/MSI-X
[ 1.797988] __pci_set_master: pcieport 0000:80:0c.0: enabling bus mastering
[ 1.797999] pcieport 0000:80:0c.0: irq 29 for MSI/MSI-X
[ 1.798074] pcieport 0000:80:0d.0: irq 30 for MSI/MSI-X
[ 1.798156] pcieport 0000:80:0e.0: irq 31 for MSI/MSI-X
[ 1.798611] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.798801] ACPI: Power Button [PWRB]
[ 1.799111] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.799277] ACPI: Power Button [PWRF]
[ 1.799586] ACPI: acpi_idle registered with cpuidle
[ 1.823491] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.844065] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a
16550A
[ 1.864631] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a
16550A
[ 1.866097] Linux agpgart interface v0.103
[ 1.867580] Floppy drive(s): fd0 is 1.44M
[ 1.870252] brd: module loaded
[ 1.871755] loop: module loaded
[ 1.872354] sata_nv 0000:00:07.0: version 3.5
[ 1.872903] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
[ 1.873919] scsi host0: sata_nv
[ 1.874433] scsi host1: sata_nv
[ 1.874663] ata1: SATA max UDMA/133 cmd 0x1440 ctl 0x1434 bmdma 0x1410 irq 21
[ 1.874820] ata2: SATA max UDMA/133 cmd 0x1438 ctl 0x1430 bmdma 0x1418 irq 21
[ 1.875338] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20
[ 1.876045] scsi host2: sata_nv
[ 1.876385] scsi host3: sata_nv
[ 1.876618] ata3: SATA max UDMA/133 cmd 0x1458 ctl 0x144c bmdma 0x1420 irq 20
[ 1.876773] ata4: SATA max UDMA/133 cmd 0x1450 ctl 0x1448 bmdma 0x1428 irq 20
[ 1.877322] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 19
[ 1.878377] scsi host4: sata_nv
[ 1.878749] scsi host5: sata_nv
[ 1.878972] ata5: SATA max UDMA/133 cmd 0xb030 ctl 0xb024 bmdma 0xb000 irq 19
[ 1.879137] ata6: SATA max UDMA/133 cmd 0xb028 ctl 0xb020 bmdma 0xb008 irq 19
[ 1.879544] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 18
[ 1.880165] scsi host6: sata_nv
[ 1.880518] scsi host7: sata_nv
[ 1.880737] ata7: SATA max UDMA/133 cmd 0xb048 ctl 0xb03c bmdma 0xb010 irq 18
[ 1.880903] ata8: SATA max UDMA/133 cmd 0xb040 ctl 0xb038 bmdma 0xb018 irq 18
[ 1.881141] pata_amd 0000:00:06.0: version 0.4.1
[ 1.882598] scsi host8: pata_amd
[ 1.883002] scsi host9: pata_amd
[ 1.883404] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1400 irq 14
[ 1.883556] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1408 irq 15
[ 1.883851] tun: Universal TUN/TAP device driver, 1.6
[ 1.884215] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 1.884829] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.885185] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.885574] FDC 0 is a post-1991 82077
[ 2.341167] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.341175] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.345122] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.345148] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.349778] ata3.00: ATA-8: ST31000340NS, SN05, max UDMA/133
[ 2.349786] ata1.00: ATA-8: ST31000340NS, SN05, max UDMA/133
[ 2.349788] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.350309] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.353704] ata5.00: ATA-8: ST31000340NS, SN05, max UDMA/133
[ 2.353930] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.353946] ata7.00: ATA-8: ST31000340NS, SN05, max UDMA/133
[ 2.353950] ata7.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.363509] e1000 0000:01:06.0 eth0: (PCI:33MHz:32-bit) 00:e0:81:b0:4d:69
[ 2.363694] e1000 0000:01:06.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.363940] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.64.
[ 2.364508] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 2.365675] ata1.00: configured for UDMA/133
[ 2.365696] ata3.00: configured for UDMA/133
[ 2.366259] scsi 0:0:0:0: Direct-Access ATA ST31000340NS SN05
PQ: 0 ANSI: 5
[ 2.366871] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 2.366968] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.367235] sd 0:0:0:0: [sda] Write Protect is off
[ 2.367386] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.367408] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.369686] ata7.00: configured for UDMA/133
[ 2.369688] ata5.00: configured for UDMA/133
[ 2.378898] sda: sda1 sda2 sda3
[ 2.379466] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.776778] tsc: Refined TSC clocksource calibration: 1908.796 MHz
[ 2.832733] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.841248] ata2.00: ATA-6: ST31000340NS, SN04, max UDMA/133
[ 2.841401] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.857230] ata2.00: configured for UDMA/133
[ 2.857486] scsi 1:0:0:0: Direct-Access ATA ST31000340NS SN04
PQ: 0 ANSI: 5
[ 2.858006] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 2.858239] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.858324] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.858327] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.858396] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.859042] scsi 2:0:0:0: Direct-Access ATA ST31000340NS SN05
PQ: 0 ANSI: 5
[ 2.859498] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 2.859554] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.859922] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.860105] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.860175] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.871978] sdb: unknown partition table
[ 2.872725] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.876720] sdc: unknown partition table
[ 2.877280] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.889268] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr
00:e0:81:b0:4d:67
[ 2.889457] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 2.889883] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17
[ 3.324302] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.332836] ata4.00: ATA-8: ST31000340NS, SN05, max UDMA/133
[ 3.336309] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.352827] ata4.00: configured for UDMA/133
[ 3.353103] scsi 3:0:0:0: Direct-Access ATA ST31000340NS SN05
PQ: 0 ANSI: 5
[ 3.353592] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 3.353632] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3.353979] scsi 4:0:0:0: Direct-Access ATA ST31000340NS SN05
PQ: 0 ANSI: 5
[ 3.354025] sd 3:0:0:0: [sdd] Write Protect is off
[ 3.354027] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.354084] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.355092] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 3.355095] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 3.355469] sd 4:0:0:0: [sde] Write Protect is off
[ 3.355628] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 3.355653] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.365453] sdd: unknown partition table
[ 3.365956] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 3.371746] sde: sde1 sde2 sde3
[ 3.372514] sd 4:0:0:0: [sde] Attached SCSI disk
[ 3.412734] forcedeth 0000:80:0a.0: ifname eth2, PHY OUI 0x5043 @ 1, addr
00:e0:81:b0:4d:68
[ 3.412934] forcedeth 0000:80:0a.0: highdma csum gbit lnktim desc-v3
[ 3.413538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.413720] ehci-pci: EHCI PCI platform driver
[ 3.414026] __pci_set_master: ehci-pci 0000:00:02.1: enabling bus mastering
[ 3.414073] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 3.414343] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus
number 1
[ 3.414511] ehci-pci 0000:00:02.1: debug port 1
[ 3.414709] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 3.414735] ehci-pci 0000:00:02.1: irq 22, io mem 0xd4001000
[ 3.424209] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 3.424630] hub 1-0:1.0: USB hub found
[ 3.424789] hub 1-0:1.0: 10 ports detected
[ 3.425219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.425407] ohci-pci: OHCI PCI platform driver
[ 3.425639] __pci_set_master: ohci-pci 0000:00:02.0: enabling bus mastering
[ 3.425643] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 3.425908] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus
number 2
[ 3.426099] ohci-pci 0000:00:02.0: irq 23, io mem 0xd4000000
[ 3.482367] hub 2-0:1.0: USB hub found
[ 3.482520] hub 2-0:1.0: 10 ports detected
[ 3.482952] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.483381] usbcore: registered new interface driver usblp
[ 3.483614] usbcore: registered new interface driver usb-storage
[ 3.483884] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 3.486916] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.487135] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.487520] mousedev: PS/2 mouse device common for all mice
[ 3.488711] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
dm-de...@redhat.com
[ 3.489698] usbcore: registered new interface driver usbhid
[ 3.489853] usbhid: USB HID core driver
[ 3.490081] oprofile: AMD IBS detected (0x00000007)
[ 3.490239] oprofile: using NMI interrupt.
[ 3.490436] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.491242] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.491516] arp_tables: (C) 2002 David S. Miller
[ 3.491689] TCP: cubic registered
[ 3.491849] NET: Registered protocol family 17
[ 3.495185] registered taskstats version 1
[ 3.496715] console [netcon0] enabled
[ 3.496872] netconsole: network logging started
[ 3.497494] acpi-cpufreq: overriding BIOS provided _PSD data
[ 3.549578] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 3.776134] Switched to clocksource tsc
[ 3.819735] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.828277] ata6.00: ATA-8: ST31000340NS, SN05, max UDMA/133
[ 3.828491] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.844261] ata6.00: configured for UDMA/133
[ 3.844563] scsi 5:0:0:0: Direct-Access ATA ST31000340NS SN05
PQ: 0 ANSI: 5
[ 3.845112] sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 3.845171] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 3.845373] scsi 6:0:0:0: Direct-Access ATA ST31000340NS SN05
PQ: 0 ANSI: 5
[ 3.845655] sd 5:0:0:0: [sdf] Write Protect is off
[ 3.845662] sd 6:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 3.845751] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 3.845757] sd 6:0:0:0: [sdg] Write Protect is off
[ 3.845760] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 3.845828] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.846532] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 3.846581] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.861515] sdg: unknown partition table
[ 3.862056] sd 6:0:0:0: [sdg] Attached SCSI disk
[ 3.863241] sdf: sdf1 sdf2 sdf3
[ 3.864029] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 4.111486] usb 2-1: new low-speed USB device number 2 using ohci-pci
[ 4.117444] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input4
[ 4.311299] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.335571] ata8.00: ATA-7: Hitachi HUA721010KLA330, GKAOA70M, max UDMA/133
[ 4.335768] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.351572] ata8.00: configured for UDMA/133
[ 4.351819] scsi 7:0:0:0: Direct-Access ATA Hitachi HUA72101 A70M
PQ: 0 ANSI: 5
[ 4.352330] sd 7:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 4.352343] sd 7:0:0:0: Attached scsi generic sg7 type 0
[ 4.352779] sd 7:0:0:0: [sdh] Write Protect is off
[ 4.352984] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ 4.353042] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.372103] sdh: unknown partition table
[ 4.372588] sd 7:0:0:0: [sdh] Attached SCSI disk
[ 4.539392] ata10.00: ATAPI: TEAC DV-516GB, HT13, max UDMA/33
[ 4.539563] ata10: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000
(0xc000) ACPI=0x701f (60:600:0x13)
[ 4.579279] ata10.00: configured for UDMA/33
[ 4.581349] scsi 9:0:0:0: CD-ROM TEAC DV-516GB HT13
PQ: 0 ANSI: 5
[ 4.596303] sr 9:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda
tray
[ 4.596455] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.596757] sr 9:0:0:0: Attached scsi CD-ROM sr0
[ 4.596862] sr 9:0:0:0: Attached scsi generic sg8 type 5
[ 4.610895] EXT3-fs (sda2): error: couldn't mount because of unsupported
optional features (240)
[ 4.612015] EXT2-fs (sda2): error: couldn't mount because of unsupported
optional features (240)
[ 4.632148] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.632335] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 4.649149] devtmpfs: mounted
[ 4.650411] Freeing unused kernel memory: 936K (ffffffff81784000 -
ffffffff8186e000)
[ 5.523160] random: nonblocking pool is initialized
[ 5.882112] hid-generic 0003:051D:0002.0001: device has no listeners,
quitting
[ 6.349324] systemd-udevd[1988]: starting version 216
[ 6.862074] forcedeth 0000:80:0a.0 enp128s10: renamed from eth2
[ 6.889198] forcedeth 0000:00:0a.0 enp0s10: renamed from eth1
[ 6.889207] systemd-udevd[2059]: renamed network interface eth2 to enp128s10
[ 6.893288] kvm: Nested Virtualization enabled
[ 6.893309] kvm: Nested Paging enabled
[ 6.913139] systemd-udevd[2064]: renamed network interface eth1 to enp0s10
[ 6.934363] Fusion MPT base driver 3.04.20
[ 6.934370] Copyright (c) 1999-2008 LSI Corporation
[ 6.941071] e1000 0000:01:06.0 enp1s6: renamed from eth0
[ 6.950959] Fusion MPT FC Host driver 3.04.20
[ 6.951377] mptbase: ioc0: Initiating bringup
[ 6.969088] systemd-udevd[2001]: renamed network interface eth0 to enp1s6
[ 7.508521] ioc0: LSIFC949E: Capabilities={Initiator,Target,LAN}
[ 8.596047] scsi host10: ioc0: LSIFC949E, FwRev=01031400h, Ports=1,
MaxQ=1023, IRQ=17
[ 8.596649] mptfc: ioc0: FC Link Established, Speed = 4 Gbps
[ 8.597446] scsi 10:0:0:0: Direct-Access ES-6600S Backup R001
PQ: 0 ANSI: 5
[ 8.598001] sd 10:0:0:0: Attached scsi generic sg9 type 0
[ 8.598205] sd 10:0:0:0: [sdi] 3906249216 512-byte logical blocks: (1.99
TB/1.81 TiB)
[ 8.598317] scsi 10:0:0:1: Direct-Access ES-6600S Data R001
PQ: 0 ANSI: 5
[ 8.598426] sd 10:0:0:0: [sdi] Write Protect is off
[ 8.598431] sd 10:0:0:0: [sdi] Mode Sense: bf 00 00 08
[ 8.598552] sd 10:0:0:0: [sdi] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 8.598608] mptscsih: ioc0: [10:0:0:0] FCP_ResponseInfo=02000000h
[ 8.598858] sd 10:0:0:1: [sdj] 15624996864 512-byte logical blocks: (7.99
TB/7.27 TiB)
[ 8.598916] sd 10:0:0:1: Attached scsi generic sg10 type 0
[ 8.599068] sd 10:0:0:1: [sdj] Write Protect is off
[ 8.599073] sd 10:0:0:1: [sdj] Mode Sense: bf 00 00 08
[ 8.599214] sd 10:0:0:1: [sdj] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 8.599259] scsi 10:0:0:2: Direct-Access ES-6600S Systems R001
PQ: 0 ANSI: 5
[ 8.599296] mptscsih: ioc0: [10:0:0:1] FCP_ResponseInfo=02000000h
[ 8.600262] sd 10:0:0:2: [sdk] 7812498432 512-byte logical blocks: (3.99
TB/3.63 TiB)
[ 8.600299] sd 10:0:0:2: Attached scsi generic sg11 type 0
[ 8.600325] sdj: unknown partition table
[ 8.600468] sd 10:0:0:2: [sdk] Write Protect is off
[ 8.600471] sd 10:0:0:2: [sdk] Mode Sense: bf 00 00 08
[ 8.600581] sd 10:0:0:2: [sdk] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 8.600633] mptscsih: ioc0: [10:0:0:2] FCP_ResponseInfo=02000000h
[ 8.601166] sd 10:0:0:1: [sdj] Attached SCSI disk
[ 8.601582] sdk: unknown partition table
[ 8.602186] sd 10:0:0:2: [sdk] Attached SCSI disk
[ 8.620850] sdi: sdi1
[ 8.621549] sd 10:0:0:0: [sdi] Attached SCSI disk
[ 9.335401] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 10.969544] end_request: I/O error, dev fd0, sector 0
[ 10.969553] floppy: error -5 while reading block 0
[ 10.969592] floppy0: do_fd_request: timeout handler died. old request
running
[ 10.993516] end_request: I/O error, dev fd0, sector 0
[ 10.993518] floppy: error -5 while reading block 0
[ 14.504737] Bridge firewalling registered
[ 14.552217] e1000: enp1s6 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: RX
[ 14.560288] device enp1s6 entered promiscuous mode
[ 14.571000] device br0 entered promiscuous mode
[ 14.598198] br0: port 1(enp1s6) entered forwarding state
[ 14.598212] br0: port 1(enp1s6) entered forwarding state
2) dmesg of reset with setpci
[ 224.485365] pci_scan_child_bus: pci_bus 0000:00: scanning bus
[ 224.485517] pci_scan_bridge: pci 0000:00:09.0: scanning [bus 01-01] behind
bridge, pass 0
[ 224.485524] pci_scan_child_bus: pci_bus 0000:01: scanning bus
[ 224.485575] pci_scan_child_bus: pci_bus 0000:01: bus scan returning with
max=01
[ 224.485581] pci_scan_bridge: pcieport 0000:00:0b.0: scanning [bus 02-02]
behind bridge, pass 0
[ 224.485588] pci_scan_child_bus: pci_bus 0000:02: scanning bus
[ 224.485593] pci_scan_child_bus: pci_bus 0000:02: bus scan returning with
max=02
[ 224.485598] pci_scan_bridge: pcieport 0000:00:0c.0: scanning [bus 03-03]
behind bridge, pass 0
[ 224.485602] pci_scan_child_bus: pci_bus 0000:03: scanning bus
[ 224.485606] pci_scan_child_bus: pci_bus 0000:03: bus scan returning with
max=03
[ 224.485611] pci_scan_bridge: pcieport 0000:00:0d.0: scanning [bus 05-05]
behind bridge, pass 0
[ 224.485615] pci_scan_child_bus: pci_bus 0000:05: scanning bus
[ 224.485619] pci_scan_child_bus: pci_bus 0000:05: bus scan returning with
max=05
[ 224.485623] pci_scan_bridge: pcieport 0000:00:0e.0: scanning [bus 06-06]
behind bridge, pass 0
[ 224.485627] pci_scan_child_bus: pci_bus 0000:06: scanning bus
[ 224.485631] pci_scan_child_bus: pci_bus 0000:06: bus scan returning with
max=06
[ 224.485637] pci_scan_bridge: pci 0000:00:09.0: scanning [bus 01-01] behind
bridge, pass 1
[ 224.485644] pci_scan_bridge: pcieport 0000:00:0b.0: scanning [bus 02-02]
behind bridge, pass 1
[ 224.485649] pci_scan_bridge: pcieport 0000:00:0c.0: scanning [bus 03-03]
behind bridge, pass 1
[ 224.485653] pci_scan_bridge: pcieport 0000:00:0d.0: scanning [bus 05-05]
behind bridge, pass 1
[ 224.485657] pci_scan_bridge: pcieport 0000:00:0e.0: scanning [bus 06-06]
behind bridge, pass 1
[ 224.485661] pci_scan_child_bus: pci_bus 0000:00: bus scan returning with
max=06
[ 224.485709] pci 0000:01:09.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus
alignment
[ 224.485715] pci_scan_child_bus: pci_bus 0000:80: scanning bus
[ 224.485774] pci_scan_bridge: pcieport 0000:80:0b.0: scanning [bus 81-85]
behind bridge, pass 0
[ 224.485778] pci_scan_child_bus: pci_bus 0000:81: scanning bus
[ 224.485782] pci_scan_child_bus: pci_bus 0000:81: bus scan returning with
max=81
[ 224.485787] pci_scan_bridge: pcieport 0000:80:0c.0: scanning [bus 86-8a]
behind bridge, pass 0
[ 224.485791] pci_scan_child_bus: pci_bus 0000:86: scanning bus
[ 224.485795] pci_scan_child_bus: pci_bus 0000:86: bus scan returning with
max=86
[ 224.485799] pci_scan_bridge: pcieport 0000:80:0d.0: scanning [bus 8b-8f]
behind bridge, pass 0
[ 224.485803] pci_scan_child_bus: pci_bus 0000:8b: scanning bus
[ 224.485807] pci_scan_child_bus: pci_bus 0000:8b: bus scan returning with
max=8b
[ 224.485811] pci_scan_bridge: pcieport 0000:80:0e.0: scanning [bus 90-94]
behind bridge, pass 0
[ 224.485815] pci_scan_child_bus: pci_bus 0000:90: scanning bus
[ 224.485819] pci_scan_child_bus: pci_bus 0000:90: bus scan returning with
max=90
[ 224.485823] pci_scan_bridge: pcieport 0000:80:0b.0: scanning [bus 81-85]
behind bridge, pass 1
[ 224.485827] pci_scan_bridge: pcieport 0000:80:0c.0: scanning [bus 86-8a]
behind bridge, pass 1
[ 224.485831] pci_scan_bridge: pcieport 0000:80:0d.0: scanning [bus 8b-8f]
behind bridge, pass 1
[ 224.485835] pci_scan_bridge: pcieport 0000:80:0e.0: scanning [bus 90-94]
behind bridge, pass 1
[ 224.485838] pci_scan_child_bus: pci_bus 0000:80: bus scan returning with
max=94
3) dmesg of Bjorn's reset
[ 109.654999] pci_scan_child_bus: pci_bus 0000:00: scanning bus
[ 109.655133] pci_scan_bridge: pci 0000:00:09.0: scanning [bus 01-01] behind
bridge, pass 0
[ 109.655139] pci_scan_child_bus: pci_bus 0000:01: scanning bus
[ 109.655198] pci_scan_child_bus: pci_bus 0000:01: bus scan returning with
max=01
[ 109.655208] pci_scan_bridge: pcieport 0000:00:0b.0: scanning [bus 02-02]
behind bridge, pass 0
[ 109.655212] pci_scan_child_bus: pci_bus 0000:02: scanning bus
[ 109.655216] pci_scan_child_bus: pci_bus 0000:02: bus scan returning with
max=02
[ 109.655221] pci_scan_bridge: pcieport 0000:00:0c.0: scanning [bus 03-03]
behind bridge, pass 0
[ 109.655225] pci_scan_child_bus: pci_bus 0000:03: scanning bus
[ 109.655228] pci_scan_child_bus: pci_bus 0000:03: bus scan returning with
max=03
[ 109.655233] pci_scan_bridge: pcieport 0000:00:0d.0: scanning [bus 05-05]
behind bridge, pass 0
[ 109.655237] pci_scan_child_bus: pci_bus 0000:05: scanning bus
[ 109.655241] pci_scan_child_bus: pci_bus 0000:05: bus scan returning with
max=05
[ 109.655245] pci_scan_bridge: pcieport 0000:00:0e.0: scanning [bus 06-06]
behind bridge, pass 0
[ 109.655249] pci_scan_child_bus: pci_bus 0000:06: scanning bus
[ 109.655269] pci 0000:06:00.0: [1000:0646] type 00 class 0x0c0400
[ 109.655288] pci 0000:06:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 109.655300] pci 0000:06:00.0: reg 0x14: [mem 0x00000000-0x00003fff 64bit]
[ 109.655311] pci 0000:06:00.0: reg 0x1c: [mem 0x00000000-0x0000ffff 64bit]
[ 109.655320] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
[ 109.655382] pci 0000:06:00.0: supports D1 D2
[ 109.660246] pci_scan_child_bus: pci_bus 0000:06: bus scan returning with
max=06
[ 109.660254] pci_scan_bridge: pci 0000:00:09.0: scanning [bus 01-01] behind
bridge, pass 1
[ 109.660258] pci_scan_bridge: pcieport 0000:00:0b.0: scanning [bus 02-02]
behind bridge, pass 1
[ 109.660262] pci_scan_bridge: pcieport 0000:00:0c.0: scanning [bus 03-03]
behind bridge, pass 1
[ 109.660266] pci_scan_bridge: pcieport 0000:00:0d.0: scanning [bus 05-05]
behind bridge, pass 1
[ 109.660270] pci_scan_bridge: pcieport 0000:00:0e.0: scanning [bus 06-06]
behind bridge, pass 1
[ 109.660274] pci_scan_child_bus: pci_bus 0000:00: bus scan returning with
max=06
[ 109.660316] pci 0000:01:09.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus
alignment
[ 109.660328] pci 0000:06:00.0: BAR 6: assigned [mem 0xd4200000-0xd42fffff
pref]
[ 109.660334] pci 0000:06:00.0: BAR 3: no space for [mem size 0x00010000 64bit]
[ 109.660337] pci 0000:06:00.0: BAR 3: failed to assign [mem size 0x00010000
64bit]
[ 109.660340] pci 0000:06:00.0: BAR 1: no space for [mem size 0x00004000 64bit]
[ 109.660342] pci 0000:06:00.0: BAR 1: failed to assign [mem size 0x00004000
64bit]
[ 109.660345] pci 0000:06:00.0: BAR 0: assigned [io 0x3000-0x30ff]
[ 109.660439] pci_scan_child_bus: pci_bus 0000:80: scanning bus
[ 109.660518] pci_scan_bridge: pcieport 0000:80:0b.0: scanning [bus 81-85]
behind bridge, pass 0
[ 109.660522] pci_scan_child_bus: pci_bus 0000:81: scanning bus
[ 109.660526] pci_scan_child_bus: pci_bus 0000:81: bus scan returning with
max=81
[ 109.660531] pci_scan_bridge: pcieport 0000:80:0c.0: scanning [bus 86-8a]
behind bridge, pass 0
[ 109.660536] pci_scan_child_bus: pci_bus 0000:86: scanning bus
[ 109.660539] pci_scan_child_bus: pci_bus 0000:86: bus scan returning with
max=86
[ 109.660545] pci_scan_bridge: pcieport 0000:80:0d.0: scanning [bus 8b-8f]
behind bridge, pass 0
[ 109.660549] pci_scan_child_bus: pci_bus 0000:8b: scanning bus
[ 109.660553] pci_scan_child_bus: pci_bus 0000:8b: bus scan returning with
max=8b
[ 109.660558] pci_scan_bridge: pcieport 0000:80:0e.0: scanning [bus 90-94]
behind bridge, pass 0
[ 109.660562] pci_scan_child_bus: pci_bus 0000:90: scanning bus
[ 109.660565] pci_scan_child_bus: pci_bus 0000:90: bus scan returning with
max=90
[ 109.660570] pci_scan_bridge: pcieport 0000:80:0b.0: scanning [bus 81-85]
behind bridge, pass 1
[ 109.660574] pci_scan_bridge: pcieport 0000:80:0c.0: scanning [bus 86-8a]
behind bridge, pass 1
[ 109.660578] pci_scan_bridge: pcieport 0000:80:0d.0: scanning [bus 8b-8f]
behind bridge, pass 1
[ 109.660582] pci_scan_bridge: pcieport 0000:80:0e.0: scanning [bus 90-94]
behind bridge, pass 1
[ 109.660586] pci_scan_child_bus: pci_bus 0000:80: bus scan returning with
max=94
[ 109.714004] Fusion MPT base driver 3.04.20
[ 109.714010] Copyright (c) 1999-2008 LSI Corporation
[ 109.722383] Fusion MPT FC Host driver 3.04.20
[ 109.722816] mptbase: ioc0: Initiating bringup
[ 109.722821] mptbase: ioc0: WARNING - Unexpected doorbell active!
[ 169.908097] mptbase: ioc0: ERROR - Failed to come READY after reset!
IocState=f0000000
[ 169.908107] mptbase: ioc0: WARNING - ResetHistory bit failed to clear!
[ 169.908111] mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh)
[ 169.908114] mptbase: ioc0: WARNING - NOT READY WARNING!
[ 169.908116] mptbase: ioc0: ERROR - didn't initialize properly! (-1)
[ 169.908209] mptfc: probe of 0000:06:00.0 failed with error -1
4) lspci and dmesg of reset with Yinghai's patches
-+-[0000:80]-+-00.0 NVIDIA Corporation CK804 Memory Controller
| +-01.0 NVIDIA Corporation CK804 Memory Controller
| +-07.0 NVIDIA Corporation CK804 Serial ATA Controller
| +-08.0 NVIDIA Corporation CK804 Serial ATA Controller
| +-0a.0 NVIDIA Corporation CK804 Ethernet Controller
| +-0b.0-[81-85]--
| +-0c.0-[86-8a]--
| +-0d.0-[8b-8f]--
| \-0e.0-[90-94]--
\-[0000:00]-+-00.0 NVIDIA Corporation CK804 Memory Controller
+-01.0 NVIDIA Corporation CK804 ISA Bridge
+-01.1 NVIDIA Corporation CK804 SMBus
+-02.0 NVIDIA Corporation CK804 USB Controller
+-02.1 NVIDIA Corporation CK804 USB Controller
+-06.0 NVIDIA Corporation CK804 IDE
+-07.0 NVIDIA Corporation CK804 Serial ATA Controller
+-08.0 NVIDIA Corporation CK804 Serial ATA Controller
+-09.0-[01]--+-06.0 Intel Corporation 82541GI Gigabit Ethernet
Controller
| \-09.0 XGI Technology Inc. (eXtreme Graphics
Innovation) Z7/Z9 (XG20 core)
+-0a.0 NVIDIA Corporation CK804 Ethernet Controller
+-0b.0-[02]--
+-0c.0-[03]--
+-0d.0-[05]--
+-0e.0-[06]----00.0 LSI Logic / Symbios Logic FC949ES Fibre
Channel Adapter
+-18.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-18.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-18.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-18.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-18.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-19.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-19.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-19.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-19.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-19.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1a.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1a.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1a.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1a.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-1a.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1b.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1b.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1b.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1b.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-1b.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1c.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1c.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1c.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1c.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-1c.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1d.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1d.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1d.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1d.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-1d.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1e.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1e.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1e.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1e.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
+-1e.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
+-1f.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
HyperTransport Configuration
+-1f.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Address Map
+-1f.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
DRAM Controller
+-1f.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Miscellaneous Control
\-1f.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor
Link Control
[ 217.421381] pcieport 0000:00:0e.0: pcie_link_disable_set: lnk_ctrl = 10
[ 231.385669] pcieport 0000:00:0e.0: pcie_link_disable_set: lnk_ctrl = 0
[ 245.327763] pci_scan_child_bus: pci_bus 0000:00: scanning bus
[ 245.327906] pci_scan_bridge: pci 0000:00:09.0: scanning [bus 01-01] behind
bridge, pass 0
[ 245.327912] pci_scan_child_bus: pci_bus 0000:01: scanning bus
[ 245.327959] pci_scan_child_bus: pci_bus 0000:01: bus scan returning with
max=01
[ 245.327964] pci_scan_bridge: pcieport 0000:00:0b.0: scanning [bus 02-02]
behind bridge, pass 0
[ 245.327969] pci_scan_child_bus: pci_bus 0000:02: scanning bus
[ 245.327973] pci_scan_child_bus: pci_bus 0000:02: bus scan returning with
max=02
[ 245.327977] pci_scan_bridge: pcieport 0000:00:0c.0: scanning [bus 03-03]
behind bridge, pass 0
[ 245.327981] pci_scan_child_bus: pci_bus 0000:03: scanning bus
[ 245.327984] pci_scan_child_bus: pci_bus 0000:03: bus scan returning with
max=03
[ 245.327991] pci_scan_bridge: pcieport 0000:00:0d.0: scanning [bus 05-05]
behind bridge, pass 0
[ 245.327995] pci_scan_child_bus: pci_bus 0000:05: scanning bus
[ 245.327999] pci_scan_child_bus: pci_bus 0000:05: bus scan returning with
max=05
[ 245.328003] pci_scan_bridge: pcieport 0000:00:0e.0: scanning [bus 06-06]
behind bridge, pass 0
[ 245.328007] pci_scan_child_bus: pci_bus 0000:06: scanning bus
[ 245.328028] pci 0000:06:00.0: [1000:0646] type 00 class 0x0c0400
[ 245.328046] pci 0000:06:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 245.328058] pci 0000:06:00.0: reg 0x14: [mem 0x00000000-0x00003fff 64bit]
[ 245.328067] pci 0000:06:00.0: reg 0x1c: [mem 0x00000000-0x0000ffff 64bit]
[ 245.328088] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
[ 245.328168] pci 0000:06:00.0: supports D1 D2
[ 245.335389] pci_scan_child_bus: pci_bus 0000:06: bus scan returning with
max=06
[ 245.335397] pci_scan_bridge: pci 0000:00:09.0: scanning [bus 01-01] behind
bridge, pass 1
[ 245.335401] pci_scan_bridge: pcieport 0000:00:0b.0: scanning [bus 02-02]
behind bridge, pass 1
[ 245.335405] pci_scan_bridge: pcieport 0000:00:0c.0: scanning [bus 03-03]
behind bridge, pass 1
[ 245.335409] pci_scan_bridge: pcieport 0000:00:0d.0: scanning [bus 05-05]
behind bridge, pass 1
[ 245.335414] pci_scan_bridge: pcieport 0000:00:0e.0: scanning [bus 06-06]
behind bridge, pass 1
[ 245.335417] pci_scan_child_bus: pci_bus 0000:00: bus scan returning with
max=06
[ 245.335460] pci 0000:01:09.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus
alignment
[ 245.335473] pci 0000:06:00.0: BAR 6: assigned [mem 0xd4200000-0xd42fffff
pref]
[ 245.335478] pci 0000:06:00.0: BAR 3: no space for [mem size 0x00010000 64bit]
[ 245.335481] pci 0000:06:00.0: BAR 3: failed to assign [mem size 0x00010000
64bit]
[ 245.335484] pci 0000:06:00.0: BAR 1: no space for [mem size 0x00004000 64bit]
[ 245.335486] pci 0000:06:00.0: BAR 1: failed to assign [mem size 0x00004000
64bit]
[ 245.335489] pci 0000:06:00.0: BAR 0: assigned [io 0x3000-0x30ff]
[ 245.335579] pci_scan_child_bus: pci_bus 0000:80: scanning bus
[ 245.335647] pci_scan_bridge: pcieport 0000:80:0b.0: scanning [bus 81-85]
behind bridge, pass 0
[ 245.335651] pci_scan_child_bus: pci_bus 0000:81: scanning bus
[ 245.335656] pci_scan_child_bus: pci_bus 0000:81: bus scan returning with
max=81
[ 245.335661] pci_scan_bridge: pcieport 0000:80:0c.0: scanning [bus 86-8a]
behind bridge, pass 0
[ 245.335665] pci_scan_child_bus: pci_bus 0000:86: scanning bus
[ 245.335668] pci_scan_child_bus: pci_bus 0000:86: bus scan returning with
max=86
[ 245.335673] pci_scan_bridge: pcieport 0000:80:0d.0: scanning [bus 8b-8f]
behind bridge, pass 0
[ 245.335677] pci_scan_child_bus: pci_bus 0000:8b: scanning bus
[ 245.335681] pci_scan_child_bus: pci_bus 0000:8b: bus scan returning with
max=8b
[ 245.335686] pci_scan_bridge: pcieport 0000:80:0e.0: scanning [bus 90-94]
behind bridge, pass 0
[ 245.335690] pci_scan_child_bus: pci_bus 0000:90: scanning bus
[ 245.335694] pci_scan_child_bus: pci_bus 0000:90: bus scan returning with
max=90
[ 245.335698] pci_scan_bridge: pcieport 0000:80:0b.0: scanning [bus 81-85]
behind bridge, pass 1
[ 245.335702] pci_scan_bridge: pcieport 0000:80:0c.0: scanning [bus 86-8a]
behind bridge, pass 1
[ 245.335706] pci_scan_bridge: pcieport 0000:80:0d.0: scanning [bus 8b-8f]
behind bridge, pass 1
[ 245.335710] pci_scan_bridge: pcieport 0000:80:0e.0: scanning [bus 90-94]
behind bridge, pass 1
[ 245.335714] pci_scan_child_bus: pci_bus 0000:80: bus scan returning with
max=94
[ 245.388012] Fusion MPT base driver 3.04.20
[ 245.388018] Copyright (c) 1999-2008 LSI Corporation
[ 245.401039] Fusion MPT FC Host driver 3.04.20
[ 245.401481] mptbase: ioc0: Initiating bringup
[ 245.401486] mptbase: ioc0: WARNING - Unexpected doorbell active!
[ 305.587210] mptbase: ioc0: ERROR - Failed to come READY after reset!
IocState=f0000000
[ 305.587220] mptbase: ioc0: WARNING - ResetHistory bit failed to clear!
[ 305.587223] mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh)
[ 305.587226] mptbase: ioc0: WARNING - NOT READY WARNING!
[ 305.587229] mptbase: ioc0: ERROR - didn't initialize properly! (-1)
[ 305.587318] mptfc: probe of 0000:06:00.0 failed with error -1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
