On Mon, 8 Sep 2014, Jason Gunthorpe wrote:
> On Tue, Sep 02, 2014 at 08:22:58PM +0000, Scot Doyle wrote:
>
>> It's spending that time (now 3 seconds) in tpm_tis_send_data.
>
> Due to request_locality?

The first command transmitted (TPM_CAP_PROP) in tpm_get_timeouts goes 
through tpm_tis_send which calls tpm_tis_send_data before setting up 
polling mode for the interrupt test. In tpm_tis_send_data, the last call 
to wait_for_tpm_stat is still timing out.

One solution would be to move the test from tpm_tis_send to 
tpm_tis_send_data. Another would be to expand the test in tpm_tis_send to 
include the call to tpm_tis_send_data.

The latter seems safer, since it provides more opportunity for an IRQ to 
be generated. E.g. I'm not sure if TPM_CAP_PROP always generates an IRQ. 
But the problem with this approach is that tpm_tis_send becomes a bit 
messy. So this patch wraps tpm_tis_send in an attempt to keep the code 
clean. (Is there a better name for the wrapped function than 
tpm_tis_send_main?)

Thoughts?

With this patch, the output becomes:
[    4.264619] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[    4.311628] tpm_tis 00:08: [Firmware Bug]: TPM interrupt not working, 
polling instead

P.S. My apologies for revisiting this issue after it seemed to be 
finalized.

---
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 2c46734..2dbd652 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -75,6 +75,10 @@ enum tis_defaults {
 #define        TPM_DID_VID(l)                  (0x0F00 | ((l) << 12))
 #define        TPM_RID(l)                      (0x0F04 | ((l) << 12))

+struct priv_data {
+       bool irq_tested;
+};
+
 static LIST_HEAD(tis_chips);
 static DEFINE_MUTEX(tis_lock);

@@ -338,12 +342,27 @@ out_err:
        return rc;
 }

+static void disable_interrupts(struct tpm_chip *chip)
+{
+       u32 intmask;
+       intmask =
+           ioread32(chip->vendor.iobase +
+                    TPM_INT_ENABLE(chip->vendor.locality));
+       intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
+                  TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
+       iowrite32(intmask,
+                 chip->vendor.iobase +
+                 TPM_INT_ENABLE(chip->vendor.locality));
+       free_irq(chip->vendor.irq, chip);
+       chip->vendor.irq = 0;
+}
+
 /*
  * If interrupts are used (signaled by an irq set in the vendor structure)
  * tpm.c can skip polling for the data to be available as the interrupt is
  * waited for here
  */
-static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
+static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
 {
        int rc;
        u32 ordinal;
@@ -373,6 +392,28 @@ out_err:
        return rc;
 }

+static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
+{
+       int rc, irq;
+       struct priv_data *priv = chip->vendor.priv;
+
+       if (!chip->vendor.irq || priv->irq_tested)
+               return tpm_tis_send_main(chip, buf, len);
+
+       /* Verify receipt of the expected IRQ */
+       irq = chip->vendor.irq;
+       chip->vendor.irq = 0;
+       rc = tpm_tis_send_main(chip, buf, len);
+       chip->vendor.irq = irq;
+       if (!priv->irq_tested) {
+               disable_interrupts(chip);
+               dev_err(chip->dev,
+                       FW_BUG "TPM interrupt not working, polling instead\n");
+       }
+       priv->irq_tested = true;
+       return rc;
+}
+
 struct tis_vendor_timeout_override {
        u32 did_vid;
        unsigned long timeout_us[4];
@@ -505,6 +546,7 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
        if (interrupt == 0)
                return IRQ_NONE;

+       ((struct priv_data*)chip->vendor.priv)->irq_tested = true;
        if (interrupt & TPM_INTF_DATA_AVAIL_INT)
                wake_up_interruptible(&chip->vendor.read_queue);
        if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
@@ -534,10 +576,14 @@ static int tpm_tis_init(struct device *dev, 
resource_size_t start,
        u32 vendor, intfcaps, intmask;
        int rc, i, irq_s, irq_e, probe;
        struct tpm_chip *chip;
+       struct priv_data *priv;

        if (!(chip = tpm_register_hardware(dev, &tpm_tis)))
                return -ENODEV;

+       priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
+       chip->vendor.priv = priv;
+
        chip->vendor.iobase = ioremap(start, len);
        if (!chip->vendor.iobase) {
                rc = -EIO;
@@ -605,19 +651,6 @@ static int tpm_tis_init(struct device *dev, 
resource_size_t start,
        if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
                dev_dbg(dev, "\tData Avail Int Support\n");

-       /* get the timeouts before testing for irqs */
-       if (tpm_get_timeouts(chip)) {
-               dev_err(dev, "Could not get TPM timeouts and durations\n");
-               rc = -ENODEV;
-               goto out_err;
-       }
-
-       if (tpm_do_selftest(chip)) {
-               dev_err(dev, "TPM self test failed\n");
-               rc = -ENODEV;
-               goto out_err;
-       }
-
        /* INTERRUPT Setup */
        init_waitqueue_head(&chip->vendor.read_queue);
        init_waitqueue_head(&chip->vendor.int_queue);
@@ -719,6 +752,18 @@ static int tpm_tis_init(struct device *dev, 
resource_size_t start,
                }
        }

+       if (tpm_get_timeouts(chip)) {
+               dev_err(dev, "Could not get TPM timeouts and durations\n");
+               rc = -ENODEV;
+               goto out_err;
+       }
+
+       if (tpm_do_selftest(chip)) {
+               dev_err(dev, "TPM self test failed\n");
+               rc = -ENODEV;
+               goto out_err;
+       }
+
        INIT_LIST_HEAD(&chip->vendor.list);
        mutex_lock(&tis_lock);
        list_add(&chip->vendor.list, &tis_chips);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to