On Mon, 2005-03-21 at 14:01 +0300, Dmitry Antipov wrote: > Hello, > > this looks like an issue with radeonfb driver. > > If radeonfb and fb console are built-in, the console blanks and system > bootup > stopped immediately after switching to fb console, and monitor displays > "No signal" > message. C-A-D works, but nothing is logged. > > For modular radeonfb, the console becomes blank after 'modprobe > radeonfb'. But the > rest of the system is fine and console input works, so I can safely > reboot the box > and get log messages at the next boot: > The host OS is Fedora Core 3. Hardware is: > - MB Asus P5GD1 > - CPU Intel P4 3.2 GHz > - Video Asus EAX600XT/HTVD (PCIE)
You mean the card is a PCI Express card ? Hrm... I'm not sure that was ever tested. I can't tell precisely what's up at this point, the dmesg looks normal except that the panel appears to be detected twice, but that's harmless. > According to http://kerneltrap.org/mailarchive/1/message/28472/thread, > I've also > tried both built-in and modular versions with non-default 'default_dynclk' > (-1, 0 and 1), but this was a no-op in my case. > > Dmitry > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Benjamin Herrenschmidt <[EMAIL PROTECTED]> - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
