Here is a modem which cannot be used because it is grabbed by the
serial driver:
00:0f.0 Modem: ALi Corporation SmartLink SmartPCI561 56K Modem (prog-if 00
[Gene
ric])
Subsystem: ARCHTEK TELECOM Corp: Unknown device 9100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f4101000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1000 [size=256]
Capabilities: <available only to root>
and here is the corresponding /proc/pci
Bus 0, device 15, function 0:
Class 0703: PCI device 10b9:5459 (rev 0).
IRQ 10.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xf4101000 [0xf4101fff].
I/O at 0x1000 [0x10ff].
There are more such devices.
On Mon, 21 Mar 2005, Russell King wrote:
> On Mon, Mar 21, 2005 at 11:16:38AM +0300, Andrey Panin wrote:
> > On 078, 03 19, 2005 at 08:33:14PM +0200, Jacques Goldberg wrote:
> > > That's really what is needed (mainline).
> > > I attach the file which Sasha, author or the lmodem driver, has
> > > modified and then it works for the chips hard-wired in the routine.
> > > To locate the patched area, look for 5457
> >
> > We can use PCI quirk here. Patch attached.
>
> I haven't seen any mail in this thread which provides the complete
> PCI ID information for these cards.Can someone oblige please, with:
>
> lspci -vv
>
> for the relevant card.
>
> --
> Russell King
> Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
> maintainer of:2.6 Serial core
>
[EMAIL PROTECTED]
>>>> Currently at TECHNION <<<<
PHONE: Technion=+(972)(0)(4)829.36.63
CERN=+(41)(22)767.73.85
FAX: Technion=+(972)(0)(4)829.39.01
CERN=+(41)(22)767.31.00
HOME: Haifa=+(972)(4)825.29.04
GSM portable: +(972)(0)544.29.36.63
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
