From: Emil Tantilov <[email protected]> 3.12-stable review patch. If anyone has any objections, please let me know.
=============== commit 2e0103810c6fed6a736c4a3af87b0f5c6bd8cd5b upstream. This patch resolves an issue where the logic used to detect changes in rx-usecs was incorrect and was masked by the call to ixgbe_update_rsc(). Setting rx-usecs between 0,2-9 and 1,10 and up requires a reset to allow ixgbe_configure_tx_ring() to set the correct value for TXDCTL.WTHRESH in order to avoid Tx hangs with BQL enabled. Signed-off-by: Emil Tantilov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Signed-off-by: Jiri Slaby <[email protected]> --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index e8649abf97c0..2cd86d30508b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2212,13 +2212,13 @@ static int ixgbe_set_coalesce(struct net_device *netdev, #if IS_ENABLED(CONFIG_BQL) /* detect ITR changes that require update of TXDCTL.WTHRESH */ - if ((adapter->tx_itr_setting > 1) && + if ((adapter->tx_itr_setting != 1) && (adapter->tx_itr_setting < IXGBE_100K_ITR)) { if ((tx_itr_prev == 1) || - (tx_itr_prev > IXGBE_100K_ITR)) + (tx_itr_prev >= IXGBE_100K_ITR)) need_reset = true; } else { - if ((tx_itr_prev > 1) && + if ((tx_itr_prev != 1) && (tx_itr_prev < IXGBE_100K_ITR)) need_reset = true; } -- 2.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
