Error 14 occurred at disk power-on lifetime: 2249 hours (93 days + 17 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 f8 23 3e 56 e0 Error: UNC at LBA = 0x00563e23 = 5652003
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 24 00 f8 07 3e 56 10 00 00:36:28.850 READ SECTOR(S) EXT 25 00 00 ff 3d 56 10 00 00:36:28.850 READ DMA EXT 25 00 00 ff 3c 56 10 00 00:36:28.850 READ DMA EXT 25 00 00 ff 3b 56 10 00 00:36:28.850 READ DMA EXT 25 00 00 ff 3a 56 10 00 00:36:28.850 READ DMA EXT
Could you please explain what these errors mean exactly and what may have caused them?
Might it be possible that these transmission/xxx errors be caused by a bad card and/or driver?
I'm asking this as the disk never showed errors on onboard IDE ports.
Nils
This error is reported by the drive itself, indicating uncorrectable errors when attempting to read data from the media. It is quite unlikely that the controller or driver is responsible for this sort of error, as can occasionally be the case for DMA timeout errors. Almost certainly the hard drive is failing.
-- Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from [EMAIL PROTECTED] Home Page: http://www.roberthancock.com/
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
