Hi Linus, please do a
bk pull bk://linux-acpi.bkbits.net/to-linus
This includes the ACPI part of memory hotplug,
plus various fixes, BIOS workarounds and a fix for
an interpreter regressions we had in 2.6.11 vs 2.6.10.
All changes here have been through Andrew's mm tree.
thanks,
-Len
ps. a plain patch is also available here:
ftp://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.11/acpi-20050309-2.6.11.diff.gz
This will update the following files:
arch/i386/kernel/acpi/sleep.c | 3
arch/ia64/kernel/acpi.c | 2
drivers/acpi/Kconfig | 20
drivers/acpi/Makefile | 1
drivers/acpi/ac.c | 18
drivers/acpi/acpi_memhotplug.c | 542 ++++++++++++++++++++++++
drivers/acpi/battery.c | 2
drivers/acpi/button.c | 4
drivers/acpi/container.c | 15
drivers/acpi/debug.c | 4
drivers/acpi/dispatcher/dsmethod.c | 11
drivers/acpi/dispatcher/dsopcode.c | 8
drivers/acpi/dispatcher/dsutils.c | 166 +++++--
drivers/acpi/dispatcher/dswexec.c | 61 ++
drivers/acpi/ec.c | 2
drivers/acpi/events/evxface.c | 4
drivers/acpi/executer/exmisc.c | 5
drivers/acpi/executer/exoparg2.c | 6
drivers/acpi/executer/exresolv.c | 6
drivers/acpi/executer/exstoren.c | 7
drivers/acpi/executer/exstorob.c | 27 -
drivers/acpi/fan.c | 33 -
drivers/acpi/ibm_acpi.c | 4
drivers/acpi/numa.c | 2
drivers/acpi/osl.c | 10
drivers/acpi/parser/psopcode.c | 2
drivers/acpi/parser/psparse.c | 42 +
drivers/acpi/parser/pswalk.c | 254 +----------
drivers/acpi/pci_irq.c | 38 +
drivers/acpi/pci_link.c | 14
drivers/acpi/pci_root.c | 4
drivers/acpi/power.c | 10
drivers/acpi/processor_core.c | 6
drivers/acpi/processor_thermal.c | 2
drivers/acpi/processor_throttling.c | 2
drivers/acpi/resources/rsaddr.c | 146 +++---
drivers/acpi/resources/rscalc.c | 14
drivers/acpi/resources/rsdump.c | 23 -
drivers/acpi/resources/rslist.c | 1
drivers/acpi/scan.c | 47 +-
drivers/acpi/thermal.c | 2
drivers/acpi/toshiba_acpi.c | 2
drivers/acpi/utilities/utcopy.c | 19
drivers/acpi/utilities/utdelete.c | 18
drivers/acpi/utilities/utglobal.c | 10
drivers/acpi/utilities/utmisc.c | 44 +
drivers/acpi/video.c | 2
drivers/pnp/pnpacpi/rsparser.c | 9
include/acpi/acconfig.h | 4
include/acpi/acdisasm.h | 5
include/acpi/acdispat.h | 10
include/acpi/acinterp.h | 1
include/acpi/aclocal.h | 4
include/acpi/acpi_bus.h | 1
include/acpi/acpi_drivers.h | 3
include/acpi/acstruct.h | 1
include/acpi/actbl.h | 4
include/acpi/actbl2.h | 79 +++
include/acpi/actypes.h | 33 -
include/acpi/platform/acenv.h | 2
include/acpi/processor.h | 2
include/linux/acpi.h | 2
62 files changed, 1301 insertions(+), 524 deletions(-)
through these ChangeSets:
<[EMAIL PROTECTED]> (05/03/17 1.2213)
[ACPI] build fix in acpi_pci_irq_disable()
bk-acpi-acpi_pci_irq_disable-build-fix.patch
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/09 1.1938.505.27)
[ACPI] ACPICA 20050309 from Bob Moore
The string-to-buffer implicit conversion code has been
modified again after a change to the ACPI specification.
In order to match the behavior of the other major ACPI
implementation, the target buffer is no longer truncated
if the source string is smaller than an existing target
buffer. This change requires an update to the ACPI spec,
and should eliminate the recent AE_AML_BUFFER_LIMIT issues.
The "implicit return" support was rewritten to a new
algorithm that solves the general case. Rather than
attempt to determine when a method is about to exit,
the result of every ASL operator is saved momentarily
until the very next ASL operator is executed. Therefore,
no matter how the method exits, there will always be a
saved implicit return value. This feature is only enabled
with the acpi_gbl_enable_interpreter_slack flag which
Linux enables unless "acpi=strict". This should
eliminate AE_AML_NO_RETURN_VALUE errors.
Implemented implicit conversion support for the predicate
(operand) of the If, Else, and While operators. String and
Buffer arguments are automatically converted to Integers.
Changed the string-to-integer conversion behavior to match
the new ACPI errata: "If no integer object exists, a new
integer is created. The ASCII string is interpreted as a
hexadecimal constant. Each string character is interpreted
as a hexadecimal value ('0'-'9', 'A'-'F', 'a', 'f'),
starting with the first character as the most significant
digit, and ending with the first non-hexadecimal character
or end-of-string." This means that the first non-hex
character terminates the conversion and this is the code
that was changed.
Fixed a problem where the ObjectType operator would fail
(fault) when used on an Index of a Package which pointed
to a null package element. The operator now properly
returns zero (Uninitialized) in this case.
Fixed a problem where the While operator used excessive
memory by not properly popping the result stack during
execution. There was no memory leak after execution,
however. (Code provided by Valery Podrezov.)
Fixed a problem where references to control methods within
Package objects caused the method to be invoked, instead
of producing a reference object pointing to the method.
Restructured and simplified the pswalk.c module
(acpi_ps_delete_parse_tree) to improve performance and reduce
code size. (Code provided by Alexey Starikovskiy.)
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/09 1.1994.11.5)
[ACPI] limit scope of various globals to static
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/09 1.1938.505.26)
[ACPI] fix acpi_numa_init() build warning
Signed-off-by: Randy Dunlap <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/09 1.1938.505.25)
[ACPI] Allow 4 digits when printing PCI segments
to be consistent with the rest of the kernel.
Signed-off-by: Bjorn Helgaas <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/08 1.1938.505.24)
[ACPI] Make PCI device -> interrupt link associations explicit,
ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [IUSB] -> GSI 10 (level,
low) -> IRQ 10
Previously, you could sometimes infer an association based on the
output
when an interrupt link is enabled, but when interrupt links are
shared
among several PCI devices, you could only make the inference for the
first
device to be enabled.
Signed-off-by: Bjorn Helgaas <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/08 1.1938.505.23)
[ACPI] PNPACPI should ignore vendor-defined resources
Signed-off-by: Bjorn Helgaas <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/03 1.1938.505.22)
[ACPI] fix [ACPI_MTX_Hardware] AE_TIME warning
which resulted from enabling the wake-on-RTC feature
http://bugme.osdl.org/show_bug.cgi?id=3967
Signed-off-by: David Shaohua Li <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/03 1.1938.505.21)
[ACPI] ACPICA 20050303 from Bob Moore for AE_AML_BUFFER_LIMIT issue.
It turns out that tightening up the interpreter to truncate buffers
per the ACPI spec was a bad idea -- BIOS' in the field depended
on old behaviour. Instead, we'll endeavor to update the ACPI spec
to reflect industry practice in this area.
http://bugme.osdl.org/show_bug.cgi?id=4263
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/02 1.1938.505.20)
[ACPI] fix sysfs "eject" file
This fixes a if-statement in setup_sys_fs_device_files(). It seems
to
assume that 'struct acpi_device_flags.ejectable' indicates whether a
device
has _EJ0 or not. But this is not a right assumption. It indicates
whether
a device has _EJ0|_EJD (See acpi_bus_get_flags() function).
setup_sys_fs_device_files() creates 'eject' file for devices that
have _EJ0
control method under a corresponding directory in
/sys/firmware/acpi/namespace/ACPI/. 'eject' file is used to trigger
hot-removal function from userland.
<Note that we expect this file location to change in the future.>
Signed-off-by: Keiichiro Tokunaga <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/02 1.1938.505.19)
[ACPI] fix ACPI container driver's notify handler.
Previously, the handler tried to make a container device be offline
if an
ACPI_NOTIFY_BUS/DEVICE_CHECK notification is performed on the device
was
present and has its acpi_device. But, the condition is weird.
Whenever
the notification is performed, there should be only the following two
conditions:
1. the device is present, but does not have its acpi_device.
2. the device is not present, but has its acpi_device.
#1 is a hot-addition case, which was handled properly also in
previous
handler. #2 is a surprising hot-removal case, which was not handled
in
previous handler.
Signed-off-by: Keiichiro Tokunaga <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/02 1.1938.505.18)
[ACPI] fix kobject_hotplug() use by ACPI processor and container
drivers
A while ago, the drivers used their own function
'processor_run_sbin_hotplug() and container_run_sbin_hotplug()' to
notify
the agent script using /sbin/hotplug mechanism. But, they were
changed to
use kobject_hotplug() instead and this has caused a side effect.
The container driver was supposed to invoke a container.agent (user
mode
agent script) using /sbin/hotplug mechanism, but after the changes,
it is
not able to call the agent any more and kobject_hotplug() in the
container.c became to invoke a namespace.agent instead if exists.
So, I
would like to use the namespace.agent to handle container hotplug
event (or
something else) and let the agent to call proper agent (e.g.
container.agent). But, there is an issue we need to solve. When the
namespace.agent is called, a path name of associated kobject is
passed as a
DEVPATH (e.g./sys/firmware/ acpi/namespace/ACPI/_SB/DEV0). However,
the
agent would not know what device is associated with the DEVPATH nor
which
agents to call since the DEVPATH name depends on platform. The
attached
patch is to add .hotplug_ops member to acpi_namespace_kset structure
and
let it to set a driver name attached to the target kobject into the
envp[]
variable as a DRV_NAME element. With this, the namespace.agent can
call
proper agents (e.g. container.agent) by refering the DRV_NAME.
Signed-off-by: Keiichiro Tokunaga <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/02 1.1938.505.17)
[ACPI] flush TLB in init_low_mappings()
From: Li Shaohua <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/02 1.1938.505.16)
[ACPI] enhance fan output in error path
Currently, fan.c ignores errors from acpi_bus_get_power. On compaq
evo
notebook that leads to very confusing empty output.
From: Pavel Machek <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/02 1.1938.505.15)
[ACPI] CONFIG_ACPI_NUMA build fix
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/03/01 1.1938.505.14)
[ACPI] ACPICA 20050228 from Bob Moore
Fixed a problem where the result of an Index() operator
(an object reference) must increment the reference count
on the target object for the life of the object reference.
Implemented AML Interpreter and Debugger support for
the new ACPI 3.0 Extended Address (IO, Memory, Space),
QwordSpace, DwordSpace, and WordSpace resource descriptors.
Implemented support in the _OSI method for the ACPI 3.0
"Extended Address Space Descriptor" string, indicating
interpreter support for the descriptors above.
Implemented header support for the new ACPI 3.0 FADT
flag bits.
Implemented header support for the new ACPI 3.0 PCI Express
bits for the PM1 status/enable registers.
Updated header support for the MADT processor local Apic
struct and MADT platform interrupt source struct for new
ACPI 3.0 fields.
Implemented header support for the SRAT and SLIT ACPI
tables.
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/02/17 1.1982.92.2)
[ACPI] Add ACPI-based memory hot plug driver.
The ACPI based memory hot plug driver patch supports physical hotplug
operations on memory. This driver fields notifications for memory add
and remove operations from firmware and notifies the VM of the
affected
memory ranges. Accordingly, this driver also maintains and updates
the
states of all the memory ranges. This driver is useful on hardware
which
helps firmware generating ACPI events for every physical hotplug
operation of memory boards on the system during runtime.
Signed-off-by: Dave Hansen <[EMAIL PROTECTED]>
Signed-off-by: Naveen B S <[EMAIL PROTECTED]>
Signed-off-by: Matt Tolentino <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
