This patch updates the IIO based ADC driver to use syscon and regmap
APIs to access and use PMU registers instead of remapping the PMU
registers in the driver.
Signed-off-by: Naveen Krishna Chatradhi <ch.nav...@samsung.com>
To: linux-...@vger.kernel.org
---
Changes since v1:
None
drivers/iio/adc/exynos_adc.c | 29 ++++++++++++++++++++---------
1 file changed, 20 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index b63e882..60847ef 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -38,6 +38,8 @@
#include <linux/iio/iio.h>
#include <linux/iio/machine.h>
#include <linux/iio/driver.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
/* EXYNOS4412/5250 ADC_V1 registers definitions */
#define ADC_V1_CON(x) ((x) + 0x00)
@@ -79,11 +81,14 @@
#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
+#define EXYNOS_ADCV1_PHY_OFFSET 0x0718
+#define EXYNOS_ADCV2_PHY_OFFSET 0x0720
+
struct exynos_adc {
struct exynos_adc_data *data;
struct device *dev;
void __iomem *regs;
- void __iomem *enable_reg;
+ struct regmap *pmu_map;
struct clk *clk;
struct clk *sclk;
unsigned int irq;
@@ -98,6 +103,7 @@ struct exynos_adc {
struct exynos_adc_data {
int num_channels;
bool needs_sclk;
+ int phy_offset;
void (*init_hw)(struct exynos_adc *info);
void (*exit_hw)(struct exynos_adc *info);
@@ -169,7 +175,7 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info)
{
u32 con1;
- writel(1, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 1);
/* set default prescaler values and Enable prescaler */
con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
@@ -183,7 +189,7 @@ static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
{
u32 con;
- writel(0, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 0);
con = readl(ADC_V1_CON(info->regs));
con |= ADC_V1_CON_STANDBY;
@@ -208,6 +214,7 @@ static void exynos_adc_v1_start_conv(struct exynos_adc
*info,
static struct exynos_adc_data const exynos_adc_v1_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
+ .phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
.init_hw = exynos_adc_v1_init_hw,
.exit_hw = exynos_adc_v1_exit_hw,
@@ -219,7 +226,7 @@ static void exynos_adc_v2_init_hw(struct exynos_adc *info)
{
u32 con1, con2;
- writel(1, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 1);
con1 = ADC_V2_CON1_SOFT_RESET;
writel(con1, ADC_V2_CON1(info->regs));
@@ -236,7 +243,7 @@ static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
{
u32 con;
- writel(0, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 0);
con = readl(ADC_V2_CON1(info->regs));
con &= ~ADC_CON_EN_START;
@@ -271,10 +278,12 @@ static void exynos_adc_v2_start_conv(struct exynos_adc
*info,
static struct exynos_adc_data const exynos_adc_v2_data = {
__EXYNOS_ADC_V2_DATA
+ .phy_offset = EXYNOS_ADCV2_PHY_OFFSET,
};
static struct exynos_adc_data const exynos3250_adc_v2_data = {
__EXYNOS_ADC_V2_DATA
+ .phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
.needs_sclk = true,
};
@@ -437,10 +446,12 @@ static int exynos_adc_probe(struct platform_device *pdev)
if (IS_ERR(info->regs))
return PTR_ERR(info->regs);
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- info->enable_reg = devm_ioremap_resource(&pdev->dev, mem);
- if (IS_ERR(info->enable_reg))
- return PTR_ERR(info->enable_reg);
+ info->pmu_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "samsung,syscon-phandle");
+ if (IS_ERR(info->pmu_map)) {
+ dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
+ return PTR_ERR(info->pmu_map);
+ }
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
