Hi Jean, thanks for the reply.
On Thu, 10 Mar 2005, Jean Delvare wrote: > I'm glad to learn you are testing things. Still the oops in saa7110 went > unnoticed for the past 3 months, so I guess that either you don't have > a DC10(+) in your test panel, or you did not test mm/rc kernels. I indeed don't test RC/MM kernels. I'm fairly happy with the current driver status, so I'm not doing any active new development on it. I run standard Fedora kernels with CVS of the driver (which is the same as what's in 2.6.10). > BUZ: > Input (saa7111): works > Output (saa7185): no init, cannot set norm I have this card, but it's no in my computer (not enough PCI slots). Last test is from a few months back. Other people (co-developers) test this for me whenever I make small driver changes. They report that it works, whatever that means. ;). I know they regularly use it for capture, so at least MJPEG capture and overlay display has to work to some degree. Output may be untested. > DC10: > Input (saa7110): oops > Output (adv7175): no init, cannot set norm > > DC30: > Input (vpx3220): works > Output (adv7175): no init, cannot set norm I have those two. Both work fine. I test raw capture, MJPEG capture and overlay display at least once a week. I don't get an oops on the DC10. I haven't tested output lately. I basically only test output when I make changes to the relevant modules, and I haven't done that lately. Last time I tested it (which must be around the time the driver was integrated into the kernel, so before 2.6.0...), it worked for me. > LM33: > Input (bt819): no init > Output (bt856): works > > LM33R10: > Input (saa7114): no init, cannot set norm > Output (adv7170): no init, cannot set norm See Buz. > As you can see, all boards are affected at some level but every user > might not be equally affected, depends whether you use input or output > or both. Note that "no init" might not affect everyone either, depends > on the chip init defaults and the user needs. Ronald, can you tell us > what exactly in the above you are testing? My experience is not the same as yours, it seems... I cannot explain why, unfortunately. Again, I'm sure your patch is correct, I'm just reporting that I'm not seeing the same thing that you're seeing. Ronald - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
