On 10 June 2014 16:57, Roman Pen <r.peni...@gmail.com> wrote:
> In case of reboot my olinuxino imx23 board does not see
> mmc card any more. mmc_rescan is being called by delayed
> work in loop, but mxs_mmc_get_cd always returns 0, so we
> will never pass the card detection check and will not do
> further card inition.
>
> This patch is just an attempt to partially revert the patch
> a91fe279ae of Sascha Hauer, where it is claimed that upper
> layer will handle broken card detection using the polling
> logic and MMC_CAP_NEEDS_POLL capability, but seems it is not
> true, because upper logic still expects 1 from 'get_cd'.
>
> So, here we always return 1 (card present) in case of
> MMC_CAP_NEEDS_POLL capability set.
>
> Signed-off-by: Roman Pen <r.peni...@gmail.com>
> CC: Chris Ball <ch...@printf.net>
> CC: Sascha Hauer <s.ha...@pengutronix.de>
> CC: Fabio Estevam <fabio.este...@freescale.com>
> CC: Shawn Guo <shawn....@linaro.org>
> CC: Ulf Hansson <ulf.hans...@linaro.org>
> CC: linux-...@vger.kernel.org
> CC: linux-kernel@vger.kernel.org

Thanks! Applied for next.

Kind regards
Uffe

> ---
>  drivers/mmc/host/mxs-mmc.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
> index 073e871..9187ce1 100644
> --- a/drivers/mmc/host/mxs-mmc.c
> +++ b/drivers/mmc/host/mxs-mmc.c
> @@ -82,7 +82,8 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
>         if (ret >= 0)
>                 return ret;
>
> -       present = !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
> +       present = mmc->caps & MMC_CAP_NEEDS_POLL ||
> +               !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
>                         BM_SSP_STATUS_CARD_DETECT);
>
>         if (mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH)
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to